Add Kbuild, Makefile, Kconfig and link script for kvx build infrastructure.
Co-developed-by: Clement Leger <clement@xxxxxxxxxxxxxxxx>
Signed-off-by: Clement Leger <clement@xxxxxxxxxxxxxxxx>
Co-developed-by: Guillaume Thouvenin <gthouvenin@xxxxxxxxx>
Signed-off-by: Guillaume Thouvenin <gthouvenin@xxxxxxxxx>
Co-developed-by: Jonathan Borne <jborne@xxxxxxxxx>
Signed-off-by: Jonathan Borne <jborne@xxxxxxxxx>
Co-developed-by: Jules Maselbas <jmaselbas@xxxxxxxxx>
Signed-off-by: Jules Maselbas <jmaselbas@xxxxxxxxx>
Co-developed-by: Julian Vetter <jvetter@xxxxxxxxx>
Signed-off-by: Julian Vetter <jvetter@xxxxxxxxx>
Co-developed-by: Marc Poulhiès <dkm@xxxxxxxxxxxx>
Signed-off-by: Marc Poulhiès <dkm@xxxxxxxxxxxx>
Co-developed-by: Marius Gligor <mgligor@xxxxxxxxx>
Signed-off-by: Marius Gligor <mgligor@xxxxxxxxx>
Co-developed-by: Samuel Jones <sjones@xxxxxxxxx>
Signed-off-by: Samuel Jones <sjones@xxxxxxxxx>
Co-developed-by: Vincent Chardon <vincent.chardon@xxxxxxxxxxxxxxxx>
Signed-off-by: Vincent Chardon <vincent.chardon@xxxxxxxxxxxxxxxx>
Co-developed-by: Yann Sionneau <ysionneau@xxxxxxxxx>
Signed-off-by: Yann Sionneau <ysionneau@xxxxxxxxx>
---
Notes:
V1 -> V2:
- typos and formatting fixes, removed int from PGTABLE_LEVELS
- renamed default_defconfig to defconfig in arch/kvx/Makefile
- Fix clean target raising an error from gcc (LIBGCC)
arch/kvx/Kconfig | 224 +++++++++++++++++++++++++++++++
arch/kvx/Kconfig.debug | 70 ++++++++++
arch/kvx/Makefile | 53 ++++++++
arch/kvx/include/asm/Kbuild | 20 +++
arch/kvx/include/uapi/asm/Kbuild | 1 +
arch/kvx/kernel/Makefile | 15 +++
arch/kvx/kernel/kvx_ksyms.c | 24 ++++
arch/kvx/kernel/vmlinux.lds.S | 150 +++++++++++++++++++++
arch/kvx/lib/Makefile | 6 +
arch/kvx/mm/Makefile | 8 ++
10 files changed, 571 insertions(+)
create mode 100644 arch/kvx/Kconfig
create mode 100644 arch/kvx/Kconfig.debug
create mode 100644 arch/kvx/Makefile
create mode 100644 arch/kvx/include/asm/Kbuild
create mode 100644 arch/kvx/include/uapi/asm/Kbuild
create mode 100644 arch/kvx/kernel/Makefile
create mode 100644 arch/kvx/kernel/kvx_ksyms.c
create mode 100644 arch/kvx/kernel/vmlinux.lds.S
create mode 100644 arch/kvx/lib/Makefile
create mode 100644 arch/kvx/mm/Makefile
diff --git a/arch/kvx/Kconfig b/arch/kvx/Kconfig
new file mode 100644
index 000000000000..0bdba6a3b08a
--- /dev/null
+++ b/arch/kvx/Kconfig
@@ -0,0 +1,224 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+config 64BIT
+ def_bool y
+
+config GENERIC_CALIBRATE_DELAY
+ def_bool y
+
+config FIX_EARLYCON_MEM
+ def_bool y
+
+config MMU
+ def_bool y
+
+config KALLSYMS_BASE_RELATIVE
+ def_bool n
+
+config GENERIC_CSUM
+ def_bool y
+
+config RWSEM_GENERIC_SPINLOCK
+ def_bool y
+
+config GENERIC_HWEIGHT
+ def_bool y
+
+config ARCH_MMAP_RND_BITS_MAX
+ default 24
+
+config ARCH_MMAP_RND_BITS_MIN
+ default 18
+
+config STACKTRACE_SUPPORT
+ def_bool y
+
+config LOCKDEP_SUPPORT
+ def_bool y
+
+config GENERIC_BUG
+ def_bool y
+ depends on BUG
+
+config KVX_4K_PAGES
+ def_bool y
+
+config KVX
+ def_bool y
+ select ARCH_CLOCKSOURCE_DATA
+ select ARCH_DMA_ADDR_T_64BIT
+ select ARCH_HAS_DEVMEM_IS_ALLOWED
+ select ARCH_HAS_DMA_PREP_COHERENT
+ select ARCH_HAS_ELF_RANDOMIZE
+ select ARCH_HAS_PTE_SPECIAL
+ select ARCH_HAS_SETUP_DMA_OPS if IOMMU_SUPPORT
+ select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+ select ARCH_HAS_SYNC_DMA_FOR_CPU
+ select ARCH_HAS_TEARDOWN_DMA_OPS if IOMMU_SUPPORT
+ select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT
+ select ARCH_USE_QUEUED_SPINLOCKS
+ select ARCH_USE_QUEUED_RWLOCKS
+ select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT
+ select ARCH_WANT_FRAME_POINTERS
+ select CLKSRC_OF
+ select COMMON_CLK
+ select DMA_DIRECT_REMAP
+ select GENERIC_ALLOCATOR
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_CPU_DEVICES
+ select GENERIC_IOMAP
+ select GENERIC_IOREMAP
+ select GENERIC_IRQ_CHIP
+ select GENERIC_IRQ_PROBE
+ select GENERIC_IRQ_SHOW
+ select GENERIC_SCHED_CLOCK
+ select HAVE_ARCH_AUDITSYSCALL
+ select HAVE_ARCH_BITREVERSE
+ select HAVE_ARCH_MMAP_RND_BITS
+ select HAVE_ASM_MODVERSIONS
+ select HAVE_DEBUG_KMEMLEAK
+ select HAVE_EFFICIENT_UNALIGNED_ACCESS
+ select HAVE_FUTEX_CMPXCHG if FUTEX
+ select HAVE_IOREMAP_PROT
+ select HAVE_MEMBLOCK_NODE_MAP
+ select HAVE_PCI
+ select HAVE_STACKPROTECTOR
+ select HAVE_SYSCALL_TRACEPOINTS
+ select IOMMU_DMA if IOMMU_SUPPORT
+ select KVX_APIC_GIC
+ select KVX_APIC_MAILBOX
+ select KVX_CORE_INTC
+ select KVX_ITGEN
+ select KVX_WATCHDOG
+ select MODULES_USE_ELF_RELA
+ select OF
+ select OF_EARLY_FLATTREE
+ select OF_RESERVED_MEM
+ select PCI_DOMAINS_GENERIC if PCI
+ select SPARSE_IRQ
+ select SYSCTL_EXCEPTION_TRACE
+ select THREAD_INFO_IN_TASK
+ select TIMER_OF
+ select TRACE_IRQFLAGS_SUPPORT
+ select WATCHDOG
+ select ZONE_DMA32
+
+config PGTABLE_LEVELS
+ default 3
+
+config HAVE_KPROBES
+ def_bool n
+
+menu "System setup"
+
+config POISON_INITMEM
+ bool "Enable to poison freed initmem"
+ default y
+ help
+ In order to debug initmem, using poison allows to verify if some
+ data/code is still using them. Enable this for debug purposes.
+
+config KVX_PHYS_OFFSET
+ hex "RAM address of memory base"
+ default 0x100000000
+
+config KVX_PAGE_OFFSET
+ hex "kernel virtual address of memory base"
+ default 0xFFFFFF8000000000
+
+config ARCH_FLATMEM_ENABLE
+ def_bool y
+
+config ARCH_SPARSEMEM_ENABLE
+ def_bool y
+
+config ARCH_SPARSEMEM_DEFAULT
+ def_bool ARCH_SPARSEMEM_ENABLE
+
+config ARCH_SELECT_MEMORY_MODEL
+ def_bool ARCH_SPARSEMEM_ENABLE
+
+config STACK_MAX_DEPTH_TO_PRINT
+ int "Maximum depth of stack to print"
+ range 1 128
+ default "24"
+
+config SECURE_DAME_HANDLING
+ bool "Secure DAME handling"
+ default y
+ help
+ In order to securely handle Data Asynchronous Memory Errors, we need
+ to do a barrier upon kernel entry when coming from userspace. This
+ barrier guarantees us that any pending DAME will be serviced right
+ away. We also need to do a barrier when returning from kernel to user.
+ This way, if the kernel or the user triggered a DAME, it will be
+ serviced by knowing we are coming from kernel or user and avoid
+ pulling the wrong lever (panic for kernel or sigfault for user).
+ This can be costly but ensures that user cannot interfere with kernel.
+ /!\ Do not disable unless you want to open a giant breach between
+ user and kernel /!\
+
+config CACHECTL_UNSAFE_PHYS_OPERATIONS
+ bool "Enable cachectl syscall unsafe physical operations"
+ default n
+ help
+ Enable cachectl syscall to allow writebacking/invalidating ranges
+ based on physical addresses. These operations requires the
+ CAP_SYS_ADMIN capability.
+
+config ENABLE_TCA
+ bool "Enable TCA coprocessor support"
+ default y
+ help
+ This option enables TCA coprocessor support. It will allow the user to
+ use the coprocessor and save registers on context switch if used.
+ Registers content will also be cleared when switching.
+
+config SMP
+ bool "Symmetric multi-processing support"
+ default n
+ select GENERIC_SMP_IDLE_THREAD
+ select GENERIC_IRQ_IPI
+ select IRQ_DOMAIN_HIERARCHY
+ select IRQ_DOMAIN
+ help
+ This enables support for systems with more than one CPU. If you have
+ a system with only one CPU, say N. If you have a system with more
+ than one CPU, say Y.
+
+ If you say N here, the kernel will run on uni- and multiprocessor
+ machines, but will use only one CPU of a multiprocessor machine. If
+ you say Y here, the kernel will run on many, but not all,
+ uniprocessor machines. On a uniprocessor machine, the kernel
+ will run faster if you say N here.
+
+config NR_CPUS
+ int "Maximum number of CPUs"
+ range 1 16
+ default "16"
+ depends on SMP
+ help
+ Kalray support can handle a maximum of 16 CPUs.
+
+config KVX_PAGE_SHIFT
+ int
+ default 12
+
+config CMDLINE
+ string "Default kernel command string"
+ default ""
+ help
+ On some architectures there is currently no way for the boot loader
+ to pass arguments to the kernel. For these architectures, you should
+ supply some command-line options at build time by entering them
+ here.
+
+endmenu
+
+menu "Kernel Features"
+source "kernel/Kconfig.hz"
+endmenu
diff --git a/arch/kvx/Kconfig.debug b/arch/kvx/Kconfig.debug
new file mode 100644
index 000000000000..171f71288ee6
--- /dev/null
+++ b/arch/kvx/Kconfig.debug
@@ -0,0 +1,70 @@
+menu "KVX debugging"
+
+config KVX_DEBUG_ASN
+ bool "Check ASN before writing TLB entry"
+ default n
+ help
+ This option allows to check if the ASN of the current
+ process matches the ASN found in MMC. If it is not the
+ case an error will be printed.
+
+config KVX_DEBUG_TLB_WRITE
+ bool "Enable TLBs write checks"
+ default n
+ help
+ Enabling this option will enable TLB access checks. This is
+ particularly helpful when modifying the assembly code responsible
+ for TLB refill. If set, mmc.e will be checked each time the TLB are
+ written and a panic will be thrown on error.
+
+config KVX_DEBUG_TLB_ACCESS
+ bool "Enable TLBs accesses logging"
+ default n
+ help
+ Enabling this option will enable TLB entry manipulation logging.
+ Each time an entry is added to the TLBs, it is logged in an array
+ readable via gdb scripts. This can be useful to understand strange
+ crashes related to suspicious virtual/physical addresses.
+
+config KVX_DEBUG_TLB_ACCESS_BITS
+ int "Number of bits used as index of entries in log table"
+ default 12
+ depends on KVX_DEBUG_TLB_ACCESS
+ help
+ Set the number of bits used as index of entries that will be logged
+ in a ring buffer called kvx_tlb_access. One entry in the table
+ contains registers TEL, TEH and MMC. It also logs the type of the
+ operations (0:read, 1:write, 2:probe). Buffer is per CPU. For one
+ entry 24 bytes are used. So by default it uses 96KB of memory per
+ CPU to store 2^12 (4096) entries.
+
+config KVX_MMU_STATS
+ bool "Register MMU stats debugfs entries"
+ default n
+ depends on DEBUG_FS
+ help
+ Enable debugfs attribute which will allow inspecting various metrics
+ regarding MMU:
+ - Number of nomapping traps handled
+ - avg/min/max time for nomapping refill (user/kernel)
+
+config DEBUG_EXCEPTION_STACK
+ bool "Enable exception stack debugging"
+ default n
+ help
+ Enable stack check debugging when entering/exiting
+ exception handlers.
+ This can be particularly helpful after modifying stack
+ handling to see if stack when exiting is the same as the one
+ when entering exception handler.
+
+config DEBUG_SFR_SET_MASK
+ bool "Enable SFR set_mask debugging"
+ default n
+ help
+ Verify that values written using kvx_sfr_set_mask match the mask.
+ This ensure that no extra bits of SFR will be overridden by some
+ incorrectly truncated values. This can lead to huge problems by
+ modifying important bits in system registers.
+
+endmenu
diff --git a/arch/kvx/Makefile b/arch/kvx/Makefile
new file mode 100644
index 000000000000..78d6d7c9c43e
--- /dev/null
+++ b/arch/kvx/Makefile
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2018-2023 Kalray Inc.
+
+ifeq ($(CROSS_COMPILE),)
+CROSS_COMPILE := kvx-elf-
+endif
+
+KBUILD_DEFCONFIG := defconfig
+
+LDFLAGS_vmlinux := -X
+OBJCOPYFLAGS := -O binary -R .comment -R .note -R .bootloader -S
+
+DEFAULT_OPTS := -nostdlib -fno-builtin -march=kv3-1
+
+# Link with libgcc to get __div* builtins.
+LIBGCC := $(shell $(CC) $(DEFAULT_OPTS) --print-libgcc-file-name)
+
+KBUILD_CFLAGS += $(DEFAULT_OPTS)
+KBUILD_AFLAGS += $(DEFAULT_OPTS)
+KBUILD_CFLAGS_MODULE += -mfarcall
+
+KBUILD_LDFLAGS += -m elf64kvx
+
+head-y := arch/kvx/kernel/head.o
+libs-y += $(LIBGCC)
+libs-y += arch/kvx/lib/
+core-y += arch/kvx/kernel/ \
+ arch/kvx/mm/ \
+ arch/kvx/platform/
+# Final targets
+all: vmlinux
+
+BOOT_TARGETS = bImage bImage.bin bImage.bz2 bImage.gz bImage.lzma bImage.lzo
+
+$(BOOT_TARGETS): vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
+install:
+ $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install
+
+define archhelp
+ echo '* bImage - Alias to selected kernel format (bImage.gz by default)'
+ echo ' bImage.bin - Uncompressed Kernel-only image for barebox (arch/$(ARCH)/boot/bImage.bin)'
+ echo ' bImage.bz2 - Kernel-only image for barebox (arch/$(ARCH)/boot/bImage.bz2)'
+ echo '* bImage.gz - Kernel-only image for barebox (arch/$(ARCH)/boot/bImage.gz)'
+ echo ' bImage.lzma - Kernel-only image for barebox (arch/$(ARCH)/boot/bImage.lzma)'
+ echo ' bImage.lzo - Kernel-only image for barebox (arch/$(ARCH)/boot/bImage.lzo)'
+ echo ' install - Install kernel using'
+ echo ' (your) ~/bin/$(INSTALLKERNEL) or'
+ echo ' (distribution) PATH: $(INSTALLKERNEL) or'
+ echo ' install to $$(INSTALL_PATH)'
+endef
diff --git a/arch/kvx/include/asm/Kbuild b/arch/kvx/include/asm/Kbuild
new file mode 100644
index 000000000000..ea73552faa10
--- /dev/null
+++ b/arch/kvx/include/asm/Kbuild
@@ -0,0 +1,20 @@
+generic-y += asm-offsets.h
+generic-y += clkdev.h
+generic-y += auxvec.h
+generic-y += bpf_perf_event.h
+generic-y += cmpxchg-local.h
+generic-y += errno.h
+generic-y += extable.h
+generic-y += export.h
+generic-y += kvm_para.h
+generic-y += mcs_spinlock.h
+generic-y += mman.h
+generic-y += param.h
+generic-y += qrwlock.h
+generic-y += qspinlock.h
+generic-y += rwsem.h
+generic-y += sockios.h
+generic-y += stat.h
+generic-y += statfs.h
+generic-y += ucontext.h
+generic-y += user.h
diff --git a/arch/kvx/include/uapi/asm/Kbuild b/arch/kvx/include/uapi/asm/Kbuild
new file mode 100644
index 000000000000..8b137891791f
--- /dev/null
+++ b/arch/kvx/include/uapi/asm/Kbuild
@@ -0,0 +1 @@
+
diff --git a/arch/kvx/kernel/Makefile b/arch/kvx/kernel/Makefile
new file mode 100644
index 000000000000..735ba3893027
--- /dev/null
+++ b/arch/kvx/kernel/Makefile
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2019-2023 Kalray Inc.
+#
+
+obj-y := head.o setup.o process.o traps.o common.o time.o prom.o kvx_ksyms.o \
+ irq.o cpuinfo.o entry.o ptrace.o syscall_table.o signal.o sys_kvx.o \
+ stacktrace.o dame_handler.o vdso.o debug.o break_hook.o \
+ reset.o io.o
+
+obj-$(CONFIG_SMP) += smp.o smpboot.o
+obj-$(CONFIG_MODULES) += module.o
+CFLAGS_module.o += -Wstrict-overflow -fstrict-overflow
+
+extra-y += vmlinux.lds
diff --git a/arch/kvx/kernel/kvx_ksyms.c b/arch/kvx/kernel/kvx_ksyms.c
new file mode 100644
index 000000000000..18990aaf259f
--- /dev/null
+++ b/arch/kvx/kernel/kvx_ksyms.c
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * derived from arch/nios2/kernel/nios2_ksyms.c
+ *
+ * Copyright (C) 2017-2023 Kalray Inc.
+ * Author(s): Clement Leger
+ * Yann Sionneau
+ */
+
+#include <linux/kernel.h>
+#include <linux/export.h>
+
+/*
+ * libgcc functions - functions that are used internally by the
+ * compiler... (prototypes are not correct though, but that
+ * doesn't really matter since they're not versioned).
+ */
+#define DECLARE_EXPORT(name) extern void name(void); EXPORT_SYMBOL(name)
+
+DECLARE_EXPORT(__moddi3);
+DECLARE_EXPORT(__umoddi3);
+DECLARE_EXPORT(__divdi3);
+DECLARE_EXPORT(__udivdi3);
+DECLARE_EXPORT(__multi3);
diff --git a/arch/kvx/kernel/vmlinux.lds.S b/arch/kvx/kernel/vmlinux.lds.S
new file mode 100644
index 000000000000..e8772334bd97
--- /dev/null
+++ b/arch/kvx/kernel/vmlinux.lds.S
@@ -0,0 +1,150 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2017-2023 Kalray Inc.
+ * Author(s): Clement Leger
+ * Guillaume Thouvenin
+ * Marius Gligor
+ * Marc Poulhiès
+ * Yann Sionneau
+ */
+
+#include <asm/thread_info.h>
+#include <asm/asm-offsets.h>
+#include <asm/sys_arch.h>
+#include <asm/cache.h>
+#include <asm/rm_fw.h>
+#include <asm/page.h>
+#include <asm/fixmap.h>
+
+#define BOOT_ENTRY 0x0
+#define DTB_DEFAULT_SIZE (64 * 1024)
+
+#define LOAD_OFFSET (PAGE_OFFSET - PHYS_OFFSET)
+#include <asm-generic/vmlinux.lds.h>
+
+OUTPUT_FORMAT("elf64-kvx")
+ENTRY(kvx_start)
+
+#define HANDLER_SECTION(__sec, __name) \
+ __sec ## _ ## __name ## _start = .; \
+ KEEP(*(.##__sec ##.## __name)); \
+ . = __sec ## _ ##__name ## _start + EXCEPTION_STRIDE;
+
+/**
+ * Generate correct section positioning for exception handling
+ * Since we need it twice for early exception handler and normal
+ * exception handler, factorize it here.
+ */
+#define EXCEPTION_SECTIONS(__sec) \
+ __ ## __sec ## _start = ABSOLUTE(.); \
+ HANDLER_SECTION(__sec,debug) \
+ HANDLER_SECTION(__sec,trap) \
+ HANDLER_SECTION(__sec,interrupt) \
+ HANDLER_SECTION(__sec,syscall)
+
+jiffies = jiffies_64;
+SECTIONS
+{
+ . = BOOT_ENTRY;
+ .boot :
+ {
+ __kernel_smem_code_start = .;
+ KEEP(*(.boot.startup));
+ KEEP(*(.boot.*));
+ __kernel_smem_code_end = .;
+ }
+
+ . = PAGE_OFFSET;
+ _start = .;
+
+ _stext = .;
+ __init_begin = .;
+ __inittext_start = .;
+ .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET)
+ {
+ EXIT_TEXT
+ }
+
+ .early_exception ALIGN(EXCEPTION_ALIGNMENT) :
+ AT(ADDR(.early_exception) - LOAD_OFFSET)
+ {
+ EXCEPTION_SECTIONS(early_exception)
+ }
+
+ HEAD_TEXT_SECTION
+ INIT_TEXT_SECTION(PAGE_SIZE)
+ . = ALIGN(PAGE_SIZE);
+ __inittext_end = .;
+ __initdata_start = .;
+ INIT_DATA_SECTION(16)
+
+ /* we have to discard exit text and such at runtime, not link time */
+ .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET)
+ {
+ EXIT_DATA
+ }
+
+ PERCPU_SECTION(L1_CACHE_BYTES)
+ . = ALIGN(PAGE_SIZE);
+ __initdata_end = .;
+ __init_end = .;
+
+ /* Everything below this point will be mapped RO EXEC up to _etext */
+ .text ALIGN(PAGE_SIZE) : AT(ADDR(.text) - LOAD_OFFSET)
+ {
+ _text = .;
+ EXCEPTION_SECTIONS(exception)
+ *(.exception.text)
+ . = ALIGN(PAGE_SIZE);
+ __exception_end = .;
+ TEXT_TEXT
+ SCHED_TEXT
+ CPUIDLE_TEXT
+ LOCK_TEXT
+ KPROBES_TEXT
+ ENTRY_TEXT
+ IRQENTRY_TEXT
+ SOFTIRQENTRY_TEXT
+ *(.fixup)
+ }
+ . = ALIGN(PAGE_SIZE);
+ _etext = .;
+
+ /* Everything below this point will be mapped RO NOEXEC up to _sdata */
+ __rodata_start = .;
+ RO_DATA(PAGE_SIZE)
+ EXCEPTION_TABLE(8)
+ . = ALIGN(32);
+ .dtb : AT(ADDR(.dtb) - LOAD_OFFSET)
+ {
+ __dtb_start = .;
+ . += DTB_DEFAULT_SIZE;
+ __dtb_end = .;
+ }
+ . = ALIGN(PAGE_SIZE);
+ __rodata_end = .;
+
+ /* Everything below this point will be mapped RW NOEXEC up to _end */
+ _sdata = .;
+ RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
+ _edata = .;
+
+ BSS_SECTION(32, 32, 32)
+ . = ALIGN(PAGE_SIZE);
+ _end = .;
+
+ /* This page will be mapped using a FIXMAP */
+ .gdb_page ALIGN(PAGE_SIZE) : AT(ADDR(.gdb_page) - LOAD_OFFSET)
+ {
+ _debug_start = ADDR(.gdb_page) - LOAD_OFFSET;
+ . += PAGE_SIZE;
+ }
+ _debug_start_lma = ASM_FIX_TO_VIRT(FIX_GDB_MEM_BASE_IDX);
+
+ /* Debugging sections */
+ STABS_DEBUG
+ DWARF_DEBUG
+
+ /* Sections to be discarded -- must be last */
+ DISCARDS
+}
diff --git a/arch/kvx/lib/Makefile b/arch/kvx/lib/Makefile
new file mode 100644
index 000000000000..ddb666c244e1
--- /dev/null
+++ b/arch/kvx/lib/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2017-2023 Kalray Inc.
+#
+
+lib-y := usercopy.o clear_page.o copy_page.o memcpy.o memset.o strlen.o delay.o
diff --git a/arch/kvx/mm/Makefile b/arch/kvx/mm/Makefile
new file mode 100644
index 000000000000..e97662cf5fed
--- /dev/null
+++ b/arch/kvx/mm/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2017-2023 Kalray Inc.
+#
+
+obj-y := init.o mmu.o fault.o tlb.o extable.o dma-mapping.o cacheflush.o
+obj-$(CONFIG_KVX_MMU_STATS) += mmu_stats.o
+obj-$(CONFIG_STRICT_DEVMEM) += mmap.o
--
2.37.2
