[PATCH v3 3/3] docs: hwmon: add docs for the NXP MC34VR500 PMIC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch adds documentation for the NXP MC34VR500 PMIC.

Signed-off-by: Mario Kicherer <dev@xxxxxxxxxxxx>
---
 Documentation/hwmon/mc34vr500.rst | 32 +++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)
 create mode 100644 Documentation/hwmon/mc34vr500.rst

diff --git a/Documentation/hwmon/mc34vr500.rst b/Documentation/hwmon/mc34vr500.rst
new file mode 100644
index 000000000000..5a8e0cbf4dbf
--- /dev/null
+++ b/Documentation/hwmon/mc34vr500.rst
@@ -0,0 +1,32 @@
+Kernel driver mc34vr500
+=======================
+
+Supported Chips:
+
+  * NXP MC34VR500
+
+    Prefix: 'mc34vr500'
+
+    Addresses scanned: I2C 0x08
+
+    Datasheet: https://www.nxp.com/docs/en/data-sheet/MC34VR500.pdf
+
+Author: Mario Kicherer <dev@xxxxxxxxxxxx>
+
+Description
+-----------
+
+This driver implements initial support for the NXP MC34VR500 PMIC. The MC34VR500
+monitors the temperature, input voltage and output currents and provides
+corresponding alarms. For the temperature, the chip can send interrupts if
+the temperature rises above one of the following values: 110°, 120°, 125° and
+130° Celsius. For the input voltage, an interrupt is sent when the voltage
+drops below 2.8V.
+
+Currently, this driver only implements the input voltage and temperature
+alarms. The interrupts are mapped as follows:
+
+<= 2.8V  -> in_min_alarm
+>110°c   -> temp_max_alarm
+>120°c   -> temp_crit_alarm
+>130°c   -> temp_emergency_alarm
-- 
2.34.1




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux