Hello: This series was applied to netdev/net-next.git (master) by David S. Miller <davem@xxxxxxxxxxxxx>: On Mon, 9 Jan 2023 17:59:25 +0100 you wrote: > This patchset adds support for getting/setting the Physical Layer > Collision Avoidace (PLCA) Reconciliation Sublayer (RS) configuration and > status on Ethernet PHYs that supports it. > > PLCA is a feature that provides improved media-access performance in terms > of throughput, latency and fairness for multi-drop (P2MP) half-duplex PHYs. > PLCA is defined in Clause 148 of the IEEE802.3 specifications as amended > by 802.3cg-2019. Currently, PLCA is supported by the 10BASE-T1S single-pair > Ethernet PHY defined in the same standard and related amendments. The OPEN > Alliance SIG TC14 defines additional specifications for the 10BASE-T1S PHY, > including a standard register map for PHYs that embeds the PLCA RS (see > PLCA management registers at https://www.opensig.org/about/specifications/). > > [...] Here is the summary with links: - [v4,net-next,1/5] net/ethtool: add netlink interface for the PLCA RS https://git.kernel.org/netdev/net-next/c/8580e16c28f3 - [v4,net-next,2/5] drivers/net/phy: add the link modes for the 10BASE-T1S Ethernet PHY https://git.kernel.org/netdev/net-next/c/16178c8ef53d - [v4,net-next,3/5] drivers/net/phy: add connection between ethtool and phylib for PLCA https://git.kernel.org/netdev/net-next/c/a23a1e57a677 - [v4,net-next,4/5] drivers/net/phy: add helpers to get/set PLCA configuration https://git.kernel.org/netdev/net-next/c/493323416fed - [v4,net-next,5/5] drivers/net/phy: add driver for the onsemi NCN26000 10BASE-T1S PHY https://git.kernel.org/netdev/net-next/c/b53e7e8d8557 You are awesome, thank you! -- Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html
