This patch adds support in phylib to read/write PLCA configuration for Ethernet PHYs that support the OPEN Alliance "10BASE-T1S PLCA Management Registers" specifications. These can be found at https://www.opensig.org/about/specifications/ Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@xxxxxxxxx> --- MAINTAINERS | 1 + drivers/net/phy/mdio-open-alliance.h | 46 +++++++ drivers/net/phy/phy-c45.c | 183 +++++++++++++++++++++++++++ include/linux/phy.h | 6 + 4 files changed, 236 insertions(+) create mode 100644 drivers/net/phy/mdio-open-alliance.h diff --git a/MAINTAINERS b/MAINTAINERS index 8faa15c360e3..4356382ad57c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -16617,6 +16617,7 @@ PLCA RECONCILIATION SUBLAYER (IEEE802.3 Clause 148) M: Piergiorgio Beruto <piergiorgio.beruto@xxxxxxxxx> L: netdev@xxxxxxxxxxxxxxx S: Maintained +F: drivers/net/phy/mdio-open-alliance.h F: net/ethtool/plca.c PLDMFW LIBRARY diff --git a/drivers/net/phy/mdio-open-alliance.h b/drivers/net/phy/mdio-open-alliance.h new file mode 100644 index 000000000000..931e14660d75 --- /dev/null +++ b/drivers/net/phy/mdio-open-alliance.h @@ -0,0 +1,46 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * mdio-open-alliance.h - definition of OPEN Alliance SIG standard registers + */ + +#ifndef __MDIO_OPEN_ALLIANCE__ +#define __MDIO_OPEN_ALLIANCE__ + +#include <linux/mdio.h> + +/* NOTE: all OATC14 registers are located in MDIO_MMD_VEND2 */ + +/* Open Alliance TC14 (10BASE-T1S) registers */ +#define MDIO_OATC14_PLCA_IDVER 0xca00 /* PLCA ID and version */ +#define MDIO_OATC14_PLCA_CTRL0 0xca01 /* PLCA Control register 0 */ +#define MDIO_OATC14_PLCA_CTRL1 0xca02 /* PLCA Control register 1 */ +#define MDIO_OATC14_PLCA_STATUS 0xca03 /* PLCA Status register */ +#define MDIO_OATC14_PLCA_TOTMR 0xca04 /* PLCA TO Timer register */ +#define MDIO_OATC14_PLCA_BURST 0xca05 /* PLCA BURST mode register */ + +/* Open Alliance TC14 PLCA IDVER register */ +#define MDIO_OATC14_PLCA_IDM 0xff00 /* PLCA MAP ID */ +#define MDIO_OATC14_PLCA_VER 0x00ff /* PLCA MAP version */ + +/* Open Alliance TC14 PLCA CTRL0 register */ +#define MDIO_OATC14_PLCA_EN BIT(15) /* PLCA enable */ +#define MDIO_OATC14_PLCA_RST BIT(14) /* PLCA reset */ + +/* Open Alliance TC14 PLCA CTRL1 register */ +#define MDIO_OATC14_PLCA_NCNT 0xff00 /* PLCA node count */ +#define MDIO_OATC14_PLCA_ID 0x00ff /* PLCA local node ID */ + +/* Open Alliance TC14 PLCA STATUS register */ +#define MDIO_OATC14_PLCA_PST BIT(15) /* PLCA status indication */ + +/* Open Alliance TC14 PLCA TOTMR register */ +#define MDIO_OATC14_PLCA_TOT 0x00ff + +/* Open Alliance TC14 PLCA BURST register */ +#define MDIO_OATC14_PLCA_MAXBC 0xff00 +#define MDIO_OATC14_PLCA_BTMR 0x00ff + +/* Version Identifiers */ +#define OATC14_IDM 0x0a00 + +#endif /* __MDIO_OPEN_ALLIANCE__ */ diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c index a87a4b3ffce4..508edd1f17d7 100644 --- a/drivers/net/phy/phy-c45.c +++ b/drivers/net/phy/phy-c45.c @@ -8,6 +8,8 @@ #include <linux/mii.h> #include <linux/phy.h> +#include "mdio-open-alliance.h" + /** * genphy_c45_baset1_able - checks if the PMA has BASE-T1 extended abilities * @phydev: target phy_device struct @@ -931,6 +933,187 @@ int genphy_c45_fast_retrain(struct phy_device *phydev, bool enable) } EXPORT_SYMBOL_GPL(genphy_c45_fast_retrain); +/** + * genphy_c45_plca_get_cfg - get PLCA configuration from standard registers + * @phydev: target phy_device struct + * @plca_cfg: output structure to store the PLCA configuration + * + * Description: if the PHY complies to the Open Alliance TC14 10BASE-T1S PLCA + * Management Registers specifications, this function can be used to retrieve + * the current PLCA configuration from the standard registers in MMD 31. + */ +int genphy_c45_plca_get_cfg(struct phy_device *phydev, + struct phy_plca_cfg *plca_cfg) +{ + int ret; + + ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, MDIO_OATC14_PLCA_IDVER); + if (ret < 0) + return ret; + + if ((ret & MDIO_OATC14_PLCA_IDM) != OATC14_IDM) + return -ENODEV; + + plca_cfg->version = ret & ~MDIO_OATC14_PLCA_IDM; + + ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, MDIO_OATC14_PLCA_CTRL0); + if (ret < 0) + return ret; + + plca_cfg->enabled = !!(ret & MDIO_OATC14_PLCA_EN); + + ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, MDIO_OATC14_PLCA_CTRL1); + if (ret < 0) + return ret; + + plca_cfg->node_cnt = (ret & MDIO_OATC14_PLCA_NCNT) >> 8; + plca_cfg->node_id = (ret & MDIO_OATC14_PLCA_ID); + + ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, MDIO_OATC14_PLCA_TOTMR); + if (ret < 0) + return ret; + + plca_cfg->to_tmr = ret & MDIO_OATC14_PLCA_TOT; + + ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, MDIO_OATC14_PLCA_BURST); + if (ret < 0) + return ret; + + plca_cfg->burst_cnt = (ret & MDIO_OATC14_PLCA_MAXBC) >> 8; + plca_cfg->burst_tmr = (ret & MDIO_OATC14_PLCA_BTMR); + + return 0; +} +EXPORT_SYMBOL_GPL(genphy_c45_plca_get_cfg); + +/** + * genphy_c45_plca_set_cfg - set PLCA configuration using standard registers + * @phydev: target phy_device struct + * @plca_cfg: structure containing the PLCA configuration. Fields set to -1 are + * not to be changed. + * + * Description: if the PHY complies to the Open Alliance TC14 10BASE-T1S PLCA + * Management Registers specifications, this function can be used to modify + * the PLCA configuration using the standard registers in MMD 31. + */ +int genphy_c45_plca_set_cfg(struct phy_device *phydev, + const struct phy_plca_cfg *plca_cfg) +{ + int ret; + u16 val; + + // PLCA IDVER is read-only + if (plca_cfg->version >= 0) + return -EINVAL; + + // first of all, disable PLCA if required + if (plca_cfg->enabled == 0) { + ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, + MDIO_OATC14_PLCA_CTRL0, + MDIO_OATC14_PLCA_EN); + + if (ret < 0) + return ret; + } + + if (plca_cfg->node_cnt >= 0 || plca_cfg->node_id >= 0) { + if (plca_cfg->node_cnt < 0 || plca_cfg->node_id < 0) { + ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, + MDIO_OATC14_PLCA_CTRL1); + + if (ret < 0) + return ret; + + val = ret; + } + + if (plca_cfg->node_cnt >= 0) + val = (val & ~MDIO_OATC14_PLCA_NCNT) | + (plca_cfg->node_cnt << 8); + + if (plca_cfg->node_id >= 0) + val = (val & ~MDIO_OATC14_PLCA_ID) | + (plca_cfg->node_id); + + ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, + MDIO_OATC14_PLCA_CTRL1, val); + + if (ret < 0) + return ret; + } + + if (plca_cfg->to_tmr >= 0) { + ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, + MDIO_OATC14_PLCA_TOTMR, + plca_cfg->to_tmr); + + if (ret < 0) + return ret; + } + + if (plca_cfg->burst_cnt >= 0 || plca_cfg->burst_tmr >= 0) { + if (plca_cfg->burst_cnt < 0 || plca_cfg->burst_tmr < 0) { + ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, + MDIO_OATC14_PLCA_BURST); + + if (ret < 0) + return ret; + + val = ret; + } + + if (plca_cfg->burst_cnt >= 0) + val = (val & ~MDIO_OATC14_PLCA_MAXBC) | + (plca_cfg->burst_cnt << 8); + + if (plca_cfg->burst_tmr >= 0) + val = (val & ~MDIO_OATC14_PLCA_BTMR) | + (plca_cfg->burst_tmr); + + ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, + MDIO_OATC14_PLCA_BURST, val); + + if (ret < 0) + return ret; + } + + // if we need to enable PLCA, do it at the end + if (plca_cfg->enabled > 0) { + ret = phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, + MDIO_OATC14_PLCA_CTRL0, + MDIO_OATC14_PLCA_EN); + + if (ret < 0) + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(genphy_c45_plca_set_cfg); + +/** + * genphy_c45_plca_get_status - get PLCA status from standard registers + * @phydev: target phy_device struct + * @plca_st: output structure to store the PLCA status + * + * Description: if the PHY complies to the Open Alliance TC14 10BASE-T1S PLCA + * Management Registers specifications, this function can be used to retrieve + * the current PLCA status information from the standard registers in MMD 31. + */ +int genphy_c45_plca_get_status(struct phy_device *phydev, + struct phy_plca_status *plca_st) +{ + int ret; + + ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, MDIO_OATC14_PLCA_STATUS); + if (ret < 0) + return ret; + + plca_st->pst = !!(ret & MDIO_OATC14_PLCA_PST); + return 0; +} +EXPORT_SYMBOL_GPL(genphy_c45_plca_get_status); + struct phy_driver genphy_c45_driver = { .phy_id = 0xffffffff, .phy_id_mask = 0xffffffff, diff --git a/include/linux/phy.h b/include/linux/phy.h index bcaf1dfd0687..23aa23cde940 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -1748,6 +1748,12 @@ int genphy_c45_loopback(struct phy_device *phydev, bool enable); int genphy_c45_pma_resume(struct phy_device *phydev); int genphy_c45_pma_suspend(struct phy_device *phydev); int genphy_c45_fast_retrain(struct phy_device *phydev, bool enable); +int genphy_c45_plca_get_cfg(struct phy_device *phydev, + struct phy_plca_cfg *plca_cfg); +int genphy_c45_plca_set_cfg(struct phy_device *phydev, + const struct phy_plca_cfg *plca_cfg); +int genphy_c45_plca_get_status(struct phy_device *phydev, + struct phy_plca_status *plca_st); /* Generic C45 PHY driver */ extern struct phy_driver genphy_c45_driver; -- 2.37.4
