Add support for configuring the PLCA Reconciliation Sublayer on multi-drop PHYs that support IEEE802.3cg-2019 Clause 148 (e.g., 10BASE-T1S). This patch adds the appropriate netlink interface to ethtool. Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@xxxxxxxxx> --- Documentation/networking/ethtool-netlink.rst | 138 +++++++++ MAINTAINERS | 6 + include/linux/ethtool.h | 12 + include/linux/phy.h | 57 ++++ include/uapi/linux/ethtool_netlink.h | 25 ++ net/ethtool/Makefile | 2 +- net/ethtool/netlink.c | 29 ++ net/ethtool/netlink.h | 6 + net/ethtool/plca.c | 277 +++++++++++++++++++ 9 files changed, 551 insertions(+), 1 deletion(-) create mode 100644 net/ethtool/plca.c diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst index f10f8eb44255..c59b542eb693 100644 --- a/Documentation/networking/ethtool-netlink.rst +++ b/Documentation/networking/ethtool-netlink.rst @@ -1716,6 +1716,141 @@ being used. Current supported options are toeplitz, xor or crc32. ETHTOOL_A_RSS_INDIR attribute returns RSS indrection table where each byte indicates queue number. +PLCA_GET_CFG +============ + +Gets the IEEE 802.3cg-2019 Clause 148 Physical Layer Collision Avoidance +(PLCA) Reconciliation Sublayer (RS) attributes. + +Request contents: + + ===================================== ====== ========================== + ``ETHTOOL_A_PLCA_HEADER`` nested request header + ===================================== ====== ========================== + +Kernel response contents: + + ====================================== ====== ============================= + ``ETHTOOL_A_PLCA_HEADER`` nested reply header + ``ETHTOOL_A_PLCA_VERSION`` u16 Supported PLCA management + interface standard/version + ``ETHTOOL_A_PLCA_ENABLED`` u8 PLCA Admin State + ``ETHTOOL_A_PLCA_NODE_ID`` u32 PLCA unique local node ID + ``ETHTOOL_A_PLCA_NODE_CNT`` u32 Number of PLCA nodes on the + network, including the + coordinator + ``ETHTOOL_A_PLCA_TO_TMR`` u32 Transmit Opportunity Timer + value in bit-times (BT) + ``ETHTOOL_A_PLCA_BURST_CNT`` u32 Number of additional packets + the node is allowed to send + within a single TO + ``ETHTOOL_A_PLCA_BURST_TMR`` u32 Time to wait for the MAC to + transmit a new frame before + terminating the burst + ====================================== ====== ============================= + +When set, the optional ``ETHTOOL_A_PLCA_VERSION`` attribute indicates which +standard and version the PLCA management interface complies to. When not set, +the interface is vendor-specific and (possibly) supplied by the driver. +The OPEN Alliance SIG specifies a standard register map for 10BASE-T1S PHYs +embedding the PLCA Reconcialiation Sublayer. See "10BASE-T1S PLCA Management +Registers" at https://www.opensig.org/about/specifications/. + +When set, the optional ``ETHTOOL_A_PLCA_ENABLED`` attribute indicates the +administrative state of the PLCA RS. When not set, the node operates in "plain" +CSMA/CD mode. This option is corresponding to ``IEEE 802.3cg-2019`` 30.16.1.1.1 +aPLCAAdminState / 30.16.1.2.1 acPLCAAdminControl. + +When set, the optional ``ETHTOOL_A_PLCA_NODE_ID`` attribute indicates the +configured local node ID of the PHY. This ID determines which transmit +opportunity (TO) is reserved for the node to transmit into. This option is +corresponding to ``IEEE 802.3cg-2019`` 30.16.1.1.4 aPLCALocalNodeID. The valid +range for this attribute is [0 .. 255] where 255 means "not configured". + +When set, the optional ``ETHTOOL_A_PLCA_NODE_CNT`` attribute indicates the +configured maximum number of PLCA nodes on the mixing-segment. This number +determines the total number of transmit opportunities generated during a +PLCA cycle. This attribute is relevant only for the PLCA coordinator, which is +the node with aPLCALocalNodeID set to 0. Follower nodes ignore this setting. +This option is corresponding to ``IEEE 802.3cg-2019`` 30.16.1.1.3 +aPLCANodeCount. The valid range for this attribute is [1 .. 255]. + +When set, the optional ``ETHTOOL_A_PLCA_TO_TMR`` attribute indicates the +configured value of the transmit opportunity timer in bit-times. This value +must be set equal across all nodes sharing the medium for PLCA to work +correctly. This option is corresponding to ``IEEE 802.3cg-2019`` 30.16.1.1.5 +aPLCATransmitOpportunityTimer. The valid range for this attribute is +[0 .. 255]. + +When set, the optional ``ETHTOOL_A_PLCA_BURST_CNT`` attribute indicates the +configured number of extra packets that the node is allowed to send during a +single transmit opportunity. By default, this attribute is 0, meaning that +the node can only send a sigle frame per TO. When greater than 0, the PLCA RS +keeps the TO after any transmission, waiting for the MAC to send a new frame +for up to aPLCABurstTimer BTs. This can only happen a number of times per PLCA +cycle up to the value of this parameter. After that, the burst is over and the +normal counting of TOs resumes. This option is corresponding to +``IEEE 802.3cg-2019`` 30.16.1.1.6 aPLCAMaxBurstCount. The valid range for this +attribute is [0 .. 255]. + +When set, the optional ``ETHTOOL_A_PLCA_BURST_TMR`` attribute indicates how +many bit-times the PLCA RS waits for the MAC to initiate a new transmission +when aPLCAMaxBurstCount is greater than 0. If the MAC fails to send a new +frame within this time, the burst ends and the counting of TOs resumes. +Otherwise, the new frame is sent as part of the current burst. This option +is corresponding to ``IEEE 802.3cg-2019`` 30.16.1.1.7 aPLCABurstTimer. The +valid range for this attribute is [0 .. 255]. Although, the value should be +set greater than the Inter-Frame-Gap (IFG) time of the MAC (plus some margin) +for PLCA burst mode to work as intended. + +PLCA_SET_CFG +============ + +Sets PLCA RS parameters. + +Request contents: + + ====================================== ====== ============================= + ``ETHTOOL_A_PLCA_HEADER`` nested request header + ``ETHTOOL_A_PLCA_ENABLED`` u8 PLCA Admin State + ``ETHTOOL_A_PLCA_NODE_ID`` u8 PLCA unique local node ID + ``ETHTOOL_A_PLCA_NODE_CNT`` u8 Number of PLCA nodes on the + netkork, including the + coordinator + ``ETHTOOL_A_PLCA_TO_TMR`` u8 Transmit Opportunity Timer + value in bit-times (BT) + ``ETHTOOL_A_PLCA_BURST_CNT`` u8 Number of additional packets + the node is allowed to send + within a single TO + ``ETHTOOL_A_PLCA_BURST_TMR`` u8 Time to wait for the MAC to + transmit a new frame before + terminating the burst + ====================================== ====== ============================= + +For a description of each attribute, see ``PLCA_GET_CFG``. + +PLCA_GET_STATUS +=============== + +Gets PLCA RS status information. + +Request contents: + + ===================================== ====== ========================== + ``ETHTOOL_A_PLCA_HEADER`` nested request header + ===================================== ====== ========================== + +Kernel response contents: + + ====================================== ====== ============================= + ``ETHTOOL_A_PLCA_HEADER`` nested reply header + ``ETHTOOL_A_PLCA_STATUS`` u8 PLCA RS operational status + ====================================== ====== ============================= + +When set, the ``ETHTOOL_A_PLCA_STATUS`` attribute indicates whether the node is +detecting the presence of the BEACON on the network. This flag is +corresponding to ``IEEE 802.3cg-2019`` 30.16.1.1.2 aPLCAStatus. + Request translation =================== @@ -1817,4 +1952,7 @@ are netlink only. n/a ``ETHTOOL_MSG_PHC_VCLOCKS_GET`` n/a ``ETHTOOL_MSG_MODULE_GET`` n/a ``ETHTOOL_MSG_MODULE_SET`` + n/a ``ETHTOOL_MSG_PLCA_GET_CFG`` + n/a ``ETHTOOL_MSG_PLCA_SET_CFG`` + n/a ``ETHTOOL_MSG_PLCA_GET_STATUS`` =================================== ===================================== diff --git a/MAINTAINERS b/MAINTAINERS index 7f0b7181e60a..8faa15c360e3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -16613,6 +16613,12 @@ S: Maintained F: Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml F: drivers/iio/chemical/pms7003.c +PLCA RECONCILIATION SUBLAYER (IEEE802.3 Clause 148) +M: Piergiorgio Beruto <piergiorgio.beruto@xxxxxxxxx> +L: netdev@xxxxxxxxxxxxxxx +S: Maintained +F: net/ethtool/plca.c + PLDMFW LIBRARY M: Jacob Keller <jacob.e.keller@xxxxxxxxx> S: Maintained diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index 9e0a76fc7de9..d0da303f6634 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -802,12 +802,17 @@ int ethtool_virtdev_set_link_ksettings(struct net_device *dev, struct phy_device; struct phy_tdr_config; +struct phy_plca_cfg; +struct phy_plca_status; /** * struct ethtool_phy_ops - Optional PHY device options * @get_sset_count: Get number of strings that @get_strings will write. * @get_strings: Return a set of strings that describe the requested objects * @get_stats: Return extended statistics about the PHY device. + * @get_plca_cfg: Return PLCA configuration. + * @set_plca_cfg: Set PLCA configuration. + * @get_plca_status: Get PLCA configuration. * @start_cable_test: Start a cable test * @start_cable_test_tdr: Start a Time Domain Reflectometry cable test * @@ -819,6 +824,13 @@ struct ethtool_phy_ops { int (*get_strings)(struct phy_device *dev, u8 *data); int (*get_stats)(struct phy_device *dev, struct ethtool_stats *stats, u64 *data); + int (*get_plca_cfg)(struct phy_device *dev, + struct phy_plca_cfg *plca_cfg); + int (*set_plca_cfg)(struct phy_device *dev, + const struct phy_plca_cfg *plca_cfg, + struct netlink_ext_ack *extack); + int (*get_plca_status)(struct phy_device *dev, + struct phy_plca_status *plca_st); int (*start_cable_test)(struct phy_device *phydev, struct netlink_ext_ack *extack); int (*start_cable_test_tdr)(struct phy_device *phydev, diff --git a/include/linux/phy.h b/include/linux/phy.h index 71eeb4e3b1fd..c2c04b989cc2 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -765,6 +765,63 @@ struct phy_tdr_config { }; #define PHY_PAIR_ALL -1 +/** + * struct phy_plca_cfg - Configuration of the PLCA (Physical Layer Collision + * Avoidance) Reconciliation Sublayer. + * + * @version: read-only PLCA register map version. -1 = not available. Ignored + * when setting the configuration. Format is the same as reported by the PLCA + * IDVER register (31.CA00). -1 = not available. + * @enabled: PLCA configured mode (enabled/disabled). -1 = not available / don't + * set. 0 = disabled, anything else = enabled. + * @node_id: the PLCA local node identifier. -1 = not available / don't set. + * Allowed values [0 .. 254]. 255 = node disabled. + * @node_cnt: the PLCA node count (maximum number of nodes having a TO). Only + * meaningful for the coordinator (node_id = 0). -1 = not available / don't + * set. Allowed values [1 .. 255]. + * @to_tmr: The value of the PLCA to_timer in bit-times, which determines the + * PLCA transmit opportunity window opening. See IEEE802.3 Clause 148 for + * more details. The to_timer shall be set equal over all nodes. + * -1 = not available / don't set. Allowed values [0 .. 255]. + * @burst_cnt: controls how many additional frames a node is allowed to send in + * single transmit opportunity (TO). The default value of 0 means that the + * node is allowed exactly one frame per TO. A value of 1 allows two frames + * per TO, and so on. -1 = not available / don't set. + * Allowed values [0 .. 255]. + * @burst_tmr: controls how many bit times to wait for the MAC to send a new + * frame before interrupting the burst. This value should be set to a value + * greater than the MAC inter-packet gap (which is typically 96 bits). + * -1 = not available / don't set. Allowed values [0 .. 255]. + * + * A structure containing configuration parameters for setting/getting the PLCA + * RS configuration. The driver does not need to implement all the parameters, + * but should report what is actually used. + */ +struct phy_plca_cfg { + int version; + int enabled; + int node_id; + int node_cnt; + int to_tmr; + int burst_cnt; + int burst_tmr; +}; + +/** + * struct phy_plca_status - Status of the PLCA (Physical Layer Collision + * Avoidance) Reconciliation Sublayer. + * + * @pst: The PLCA status as reported by the PST bit in the PLCA STATUS + * register(31.CA03), indicating BEACON activity. + * + * A structure containing status information of the PLCA RS configuration. + * The driver does not need to implement all the parameters, but should report + * what is actually used. + */ +struct phy_plca_status { + bool pst; +}; + /** * struct phy_driver - Driver structure for a particular PHY type * diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h index 5799a9db034e..75b3d6d476ff 100644 --- a/include/uapi/linux/ethtool_netlink.h +++ b/include/uapi/linux/ethtool_netlink.h @@ -52,6 +52,9 @@ enum { ETHTOOL_MSG_PSE_GET, ETHTOOL_MSG_PSE_SET, ETHTOOL_MSG_RSS_GET, + ETHTOOL_MSG_PLCA_GET_CFG, + ETHTOOL_MSG_PLCA_SET_CFG, + ETHTOOL_MSG_PLCA_GET_STATUS, /* add new constants above here */ __ETHTOOL_MSG_USER_CNT, @@ -99,6 +102,9 @@ enum { ETHTOOL_MSG_MODULE_NTF, ETHTOOL_MSG_PSE_GET_REPLY, ETHTOOL_MSG_RSS_GET_REPLY, + ETHTOOL_MSG_PLCA_GET_CFG_REPLY, + ETHTOOL_MSG_PLCA_GET_STATUS_REPLY, + ETHTOOL_MSG_PLCA_NTF, /* add new constants above here */ __ETHTOOL_MSG_KERNEL_CNT, @@ -894,6 +900,25 @@ enum { ETHTOOL_A_RSS_MAX = (__ETHTOOL_A_RSS_CNT - 1), }; +/* PLCA */ + +enum { + ETHTOOL_A_PLCA_UNSPEC, + ETHTOOL_A_PLCA_HEADER, /* nest - _A_HEADER_* */ + ETHTOOL_A_PLCA_VERSION, /* u16 */ + ETHTOOL_A_PLCA_ENABLED, /* u8 */ + ETHTOOL_A_PLCA_STATUS, /* u8 */ + ETHTOOL_A_PLCA_NODE_CNT, /* u32 */ + ETHTOOL_A_PLCA_NODE_ID, /* u32 */ + ETHTOOL_A_PLCA_TO_TMR, /* u32 */ + ETHTOOL_A_PLCA_BURST_CNT, /* u32 */ + ETHTOOL_A_PLCA_BURST_TMR, /* u32 */ + + /* add new constants above here */ + __ETHTOOL_A_PLCA_CNT, + ETHTOOL_A_PLCA_MAX = (__ETHTOOL_A_PLCA_CNT - 1) +}; + /* generic netlink info */ #define ETHTOOL_GENL_NAME "ethtool" #define ETHTOOL_GENL_VERSION 1 diff --git a/net/ethtool/Makefile b/net/ethtool/Makefile index 228f13df2e18..563864c1bf5a 100644 --- a/net/ethtool/Makefile +++ b/net/ethtool/Makefile @@ -8,4 +8,4 @@ ethtool_nl-y := netlink.o bitset.o strset.o linkinfo.o linkmodes.o rss.o \ linkstate.o debug.o wol.o features.o privflags.o rings.o \ channels.o coalesce.o pause.o eee.o tsinfo.o cabletest.o \ tunnels.o fec.o eeprom.o stats.o phc_vclocks.o module.o \ - pse-pd.o + pse-pd.o plca.o diff --git a/net/ethtool/netlink.c b/net/ethtool/netlink.c index aee98be6237f..9f924875bba9 100644 --- a/net/ethtool/netlink.c +++ b/net/ethtool/netlink.c @@ -288,6 +288,8 @@ ethnl_default_requests[__ETHTOOL_MSG_USER_CNT] = { [ETHTOOL_MSG_MODULE_GET] = ðnl_module_request_ops, [ETHTOOL_MSG_PSE_GET] = ðnl_pse_request_ops, [ETHTOOL_MSG_RSS_GET] = ðnl_rss_request_ops, + [ETHTOOL_MSG_PLCA_GET_CFG] = ðnl_plca_cfg_request_ops, + [ETHTOOL_MSG_PLCA_GET_STATUS] = ðnl_plca_status_request_ops, }; static struct ethnl_dump_ctx *ethnl_dump_context(struct netlink_callback *cb) @@ -603,6 +605,7 @@ ethnl_default_notify_ops[ETHTOOL_MSG_KERNEL_MAX + 1] = { [ETHTOOL_MSG_EEE_NTF] = ðnl_eee_request_ops, [ETHTOOL_MSG_FEC_NTF] = ðnl_fec_request_ops, [ETHTOOL_MSG_MODULE_NTF] = ðnl_module_request_ops, + [ETHTOOL_MSG_PLCA_NTF] = ðnl_plca_cfg_request_ops, }; /* default notification handler */ @@ -696,6 +699,7 @@ static const ethnl_notify_handler_t ethnl_notify_handlers[] = { [ETHTOOL_MSG_EEE_NTF] = ethnl_default_notify, [ETHTOOL_MSG_FEC_NTF] = ethnl_default_notify, [ETHTOOL_MSG_MODULE_NTF] = ethnl_default_notify, + [ETHTOOL_MSG_PLCA_NTF] = ethnl_default_notify, }; void ethtool_notify(struct net_device *dev, unsigned int cmd, const void *data) @@ -1047,6 +1051,31 @@ static const struct genl_ops ethtool_genl_ops[] = { .policy = ethnl_rss_get_policy, .maxattr = ARRAY_SIZE(ethnl_rss_get_policy) - 1, }, + { + .cmd = ETHTOOL_MSG_PLCA_GET_CFG, + .doit = ethnl_default_doit, + .start = ethnl_default_start, + .dumpit = ethnl_default_dumpit, + .done = ethnl_default_done, + .policy = ethnl_plca_get_cfg_policy, + .maxattr = ARRAY_SIZE(ethnl_plca_get_cfg_policy) - 1, + }, + { + .cmd = ETHTOOL_MSG_PLCA_SET_CFG, + .flags = GENL_UNS_ADMIN_PERM, + .doit = ethnl_set_plca_cfg, + .policy = ethnl_plca_set_cfg_policy, + .maxattr = ARRAY_SIZE(ethnl_plca_set_cfg_policy) - 1, + }, + { + .cmd = ETHTOOL_MSG_PLCA_GET_STATUS, + .doit = ethnl_default_doit, + .start = ethnl_default_start, + .dumpit = ethnl_default_dumpit, + .done = ethnl_default_done, + .policy = ethnl_plca_get_status_policy, + .maxattr = ARRAY_SIZE(ethnl_plca_get_status_policy) - 1, + }, }; static const struct genl_multicast_group ethtool_nl_mcgrps[] = { diff --git a/net/ethtool/netlink.h b/net/ethtool/netlink.h index 3753787ba233..f271266f6e28 100644 --- a/net/ethtool/netlink.h +++ b/net/ethtool/netlink.h @@ -347,6 +347,8 @@ extern const struct ethnl_request_ops ethnl_phc_vclocks_request_ops; extern const struct ethnl_request_ops ethnl_module_request_ops; extern const struct ethnl_request_ops ethnl_pse_request_ops; extern const struct ethnl_request_ops ethnl_rss_request_ops; +extern const struct ethnl_request_ops ethnl_plca_cfg_request_ops; +extern const struct ethnl_request_ops ethnl_plca_status_request_ops; extern const struct nla_policy ethnl_header_policy[ETHTOOL_A_HEADER_FLAGS + 1]; extern const struct nla_policy ethnl_header_policy_stats[ETHTOOL_A_HEADER_FLAGS + 1]; @@ -388,6 +390,9 @@ extern const struct nla_policy ethnl_module_set_policy[ETHTOOL_A_MODULE_POWER_MO extern const struct nla_policy ethnl_pse_get_policy[ETHTOOL_A_PSE_HEADER + 1]; extern const struct nla_policy ethnl_pse_set_policy[ETHTOOL_A_PSE_MAX + 1]; extern const struct nla_policy ethnl_rss_get_policy[ETHTOOL_A_RSS_CONTEXT + 1]; +extern const struct nla_policy ethnl_plca_get_cfg_policy[ETHTOOL_A_PLCA_HEADER + 1]; +extern const struct nla_policy ethnl_plca_set_cfg_policy[ETHTOOL_A_PLCA_MAX + 1]; +extern const struct nla_policy ethnl_plca_get_status_policy[ETHTOOL_A_PLCA_HEADER + 1]; int ethnl_set_linkinfo(struct sk_buff *skb, struct genl_info *info); int ethnl_set_linkmodes(struct sk_buff *skb, struct genl_info *info); @@ -408,6 +413,7 @@ int ethnl_tunnel_info_dumpit(struct sk_buff *skb, struct netlink_callback *cb); int ethnl_set_fec(struct sk_buff *skb, struct genl_info *info); int ethnl_set_module(struct sk_buff *skb, struct genl_info *info); int ethnl_set_pse(struct sk_buff *skb, struct genl_info *info); +int ethnl_set_plca_cfg(struct sk_buff *skb, struct genl_info *info); extern const char stats_std_names[__ETHTOOL_STATS_CNT][ETH_GSTRING_LEN]; extern const char stats_eth_phy_names[__ETHTOOL_A_STATS_ETH_PHY_CNT][ETH_GSTRING_LEN]; diff --git a/net/ethtool/plca.c b/net/ethtool/plca.c new file mode 100644 index 000000000000..d9bb13ffc654 --- /dev/null +++ b/net/ethtool/plca.c @@ -0,0 +1,277 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include <linux/phy.h> +#include <linux/ethtool_netlink.h> + +#include "netlink.h" +#include "common.h" + +struct plca_req_info { + struct ethnl_req_info base; +}; + +struct plca_reply_data { + struct ethnl_reply_data base; + struct phy_plca_cfg plca_cfg; + struct phy_plca_status plca_st; +}; + +// Helpers ------------------------------------------------------------------ // + +#define PLCA_REPDATA(__reply_base) \ + container_of(__reply_base, struct plca_reply_data, base) + +static void plca_update_sint(int *dst, const struct nlattr *attr, + bool *mod) +{ + if (!attr) + return; + + *dst = nla_get_u32(attr); + *mod = true; +} + +// PLCA get configuration message ------------------------------------------- // + +const struct nla_policy ethnl_plca_get_cfg_policy[] = { + [ETHTOOL_A_PLCA_HEADER] = + NLA_POLICY_NESTED(ethnl_header_policy), +}; + +static int plca_get_cfg_prepare_data(const struct ethnl_req_info *req_base, + struct ethnl_reply_data *reply_base, + struct genl_info *info) +{ + struct plca_reply_data *data = PLCA_REPDATA(reply_base); + struct net_device *dev = reply_base->dev; + const struct ethtool_phy_ops *ops; + int ret; + + // check that the PHY device is available and connected + if (!dev->phydev) { + ret = -EOPNOTSUPP; + goto out; + } + + // note: rtnl_lock is held already by ethnl_default_doit + ops = ethtool_phy_ops; + if (!ops || !ops->get_plca_cfg) { + ret = -EOPNOTSUPP; + goto out; + } + + ret = ethnl_ops_begin(dev); + if (!ret) + goto out; + + memset(&data->plca_cfg, 0xff, + sizeof_field(struct plca_reply_data, plca_cfg)); + + ret = ops->get_plca_cfg(dev->phydev, &data->plca_cfg); + ethnl_ops_complete(dev); + +out: + return ret; +} + +static int plca_get_cfg_reply_size(const struct ethnl_req_info *req_base, + const struct ethnl_reply_data *reply_base) +{ + return nla_total_size(sizeof(u16)) + /* _VERSION */ + nla_total_size(sizeof(u8)) + /* _ENABLED */ + nla_total_size(sizeof(u32)) + /* _NODE_CNT */ + nla_total_size(sizeof(u32)) + /* _NODE_ID */ + nla_total_size(sizeof(u32)) + /* _TO_TIMER */ + nla_total_size(sizeof(u32)) + /* _BURST_COUNT */ + nla_total_size(sizeof(u32)); /* _BURST_TIMER */ +} + +static int plca_get_cfg_fill_reply(struct sk_buff *skb, + const struct ethnl_req_info *req_base, + const struct ethnl_reply_data *reply_base) +{ + const struct plca_reply_data *data = PLCA_REPDATA(reply_base); + const struct phy_plca_cfg *plca = &data->plca_cfg; + + if ((plca->version >= 0 && + nla_put_u16(skb, ETHTOOL_A_PLCA_VERSION, plca->version)) || + (plca->enabled >= 0 && + nla_put_u8(skb, ETHTOOL_A_PLCA_ENABLED, !!plca->enabled)) || + (plca->node_id >= 0 && + nla_put_u32(skb, ETHTOOL_A_PLCA_NODE_ID, plca->node_id)) || + (plca->node_cnt >= 0 && + nla_put_u32(skb, ETHTOOL_A_PLCA_NODE_CNT, plca->node_cnt)) || + (plca->to_tmr >= 0 && + nla_put_u32(skb, ETHTOOL_A_PLCA_TO_TMR, plca->to_tmr)) || + (plca->burst_cnt >= 0 && + nla_put_u32(skb, ETHTOOL_A_PLCA_BURST_CNT, plca->burst_cnt)) || + (plca->burst_tmr >= 0 && + nla_put_u32(skb, ETHTOOL_A_PLCA_BURST_TMR, plca->burst_tmr))) + return -EMSGSIZE; + + return 0; +}; + +const struct ethnl_request_ops ethnl_plca_cfg_request_ops = { + .request_cmd = ETHTOOL_MSG_PLCA_GET_CFG, + .reply_cmd = ETHTOOL_MSG_PLCA_GET_CFG_REPLY, + .hdr_attr = ETHTOOL_A_PLCA_HEADER, + .req_info_size = sizeof(struct plca_req_info), + .reply_data_size = sizeof(struct plca_reply_data), + + .prepare_data = plca_get_cfg_prepare_data, + .reply_size = plca_get_cfg_reply_size, + .fill_reply = plca_get_cfg_fill_reply, +}; + +// PLCA set configuration message ------------------------------------------- // + +const struct nla_policy ethnl_plca_set_cfg_policy[] = { + [ETHTOOL_A_PLCA_HEADER] = + NLA_POLICY_NESTED(ethnl_header_policy), + [ETHTOOL_A_PLCA_ENABLED] = NLA_POLICY_MAX(NLA_U8, 1), + [ETHTOOL_A_PLCA_NODE_ID] = NLA_POLICY_MAX(NLA_U32, 255), + [ETHTOOL_A_PLCA_NODE_CNT] = NLA_POLICY_RANGE(NLA_U32, 1, 255), + [ETHTOOL_A_PLCA_TO_TMR] = NLA_POLICY_MAX(NLA_U32, 255), + [ETHTOOL_A_PLCA_BURST_CNT] = NLA_POLICY_MAX(NLA_U32, 255), + [ETHTOOL_A_PLCA_BURST_TMR] = NLA_POLICY_MAX(NLA_U32, 255), +}; + +int ethnl_set_plca_cfg(struct sk_buff *skb, struct genl_info *info) +{ + struct ethnl_req_info req_info = {}; + struct nlattr **tb = info->attrs; + const struct ethtool_phy_ops *ops; + struct phy_plca_cfg plca_cfg; + struct net_device *dev; + bool mod = false; + int ret; + + ret = ethnl_parse_header_dev_get(&req_info, + tb[ETHTOOL_A_PLCA_HEADER], + genl_info_net(info), info->extack, + true); + if (!ret) + return ret; + + dev = req_info.dev; + + rtnl_lock(); + + // check that the PHY device is available and connected + if (!dev->phydev) { + ret = -EOPNOTSUPP; + goto out_rtnl; + } + + ops = ethtool_phy_ops; + if (!ops || !ops->set_plca_cfg) { + ret = -EOPNOTSUPP; + goto out_rtnl; + } + + ret = ethnl_ops_begin(dev); + if (!ret) + goto out_rtnl; + + memset(&plca_cfg, 0xff, sizeof(plca_cfg)); + plca_update_sint(&plca_cfg.enabled, tb[ETHTOOL_A_PLCA_ENABLED], &mod); + plca_update_sint(&plca_cfg.node_id, tb[ETHTOOL_A_PLCA_NODE_ID], &mod); + plca_update_sint(&plca_cfg.node_cnt, tb[ETHTOOL_A_PLCA_NODE_CNT], &mod); + plca_update_sint(&plca_cfg.to_tmr, tb[ETHTOOL_A_PLCA_TO_TMR], &mod); + plca_update_sint(&plca_cfg.burst_cnt, tb[ETHTOOL_A_PLCA_BURST_CNT], + &mod); + plca_update_sint(&plca_cfg.burst_tmr, tb[ETHTOOL_A_PLCA_BURST_TMR], + &mod); + + ret = 0; + if (!mod) + goto out_ops; + + ret = ops->set_plca_cfg(dev->phydev, &plca_cfg, info->extack); + if (!ret) + goto out_ops; + + ethtool_notify(dev, ETHTOOL_MSG_PLCA_NTF, NULL); + +out_ops: + ethnl_ops_complete(dev); +out_rtnl: + rtnl_unlock(); + ethnl_parse_header_dev_put(&req_info); + + return ret; +} + +// PLCA get status message -------------------------------------------------- // + +const struct nla_policy ethnl_plca_get_status_policy[] = { + [ETHTOOL_A_PLCA_HEADER] = + NLA_POLICY_NESTED(ethnl_header_policy), +}; + +static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base, + struct ethnl_reply_data *reply_base, + struct genl_info *info) +{ + struct plca_reply_data *data = PLCA_REPDATA(reply_base); + struct net_device *dev = reply_base->dev; + const struct ethtool_phy_ops *ops; + int ret; + + // check that the PHY device is available and connected + if (!dev->phydev) { + ret = -EOPNOTSUPP; + goto out; + } + + // note: rtnl_lock is held already by ethnl_default_doit + ops = ethtool_phy_ops; + if (!ops || !ops->get_plca_status) { + ret = -EOPNOTSUPP; + goto out; + } + + ret = ethnl_ops_begin(dev); + if (!ret) + goto out; + + memset(&data->plca_st, 0xff, + sizeof_field(struct plca_reply_data, plca_st)); + + ret = ops->get_plca_status(dev->phydev, &data->plca_st); + ethnl_ops_complete(dev); +out: + return ret; +} + +static int plca_get_status_reply_size(const struct ethnl_req_info *req_base, + const struct ethnl_reply_data *reply_base) +{ + return nla_total_size(sizeof(u8)); /* _STATUS */ +} + +static int plca_get_status_fill_reply(struct sk_buff *skb, + const struct ethnl_req_info *req_base, + const struct ethnl_reply_data *reply_base) +{ + const struct plca_reply_data *data = PLCA_REPDATA(reply_base); + const u8 status = data->plca_st.pst; + + if (nla_put_u8(skb, ETHTOOL_A_PLCA_STATUS, !!status)) + return -EMSGSIZE; + + return 0; +}; + +const struct ethnl_request_ops ethnl_plca_status_request_ops = { + .request_cmd = ETHTOOL_MSG_PLCA_GET_STATUS, + .reply_cmd = ETHTOOL_MSG_PLCA_GET_STATUS_REPLY, + .hdr_attr = ETHTOOL_A_PLCA_HEADER, + .req_info_size = sizeof(struct plca_req_info), + .reply_data_size = sizeof(struct plca_reply_data), + + .prepare_data = plca_get_status_prepare_data, + .reply_size = plca_get_status_reply_size, + .fill_reply = plca_get_status_fill_reply, +}; -- 2.37.4
