Re: [PATCH v7 01/11] leds: add support for hardware driven LEDs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Dec 15, 2022 at 04:13:03PM +0000, Russell King (Oracle) wrote:
> Hi Christian,
> 
> Thanks for the patch.
> 
> I think Andrew's email is offline at the moment.
>

Notice by gmail spamming me "I CAN'T SEND IT AHHHHH"
Holidy times I guess?

> On Thu, Dec 15, 2022 at 12:54:28AM +0100, Christian Marangi wrote:
> > +static bool led_trigger_is_supported(struct led_classdev *led_cdev,
> > +				     struct led_trigger *trigger)
> > +{
> > +	switch (led_cdev->blink_mode) {
> > +	case SOFTWARE_CONTROLLED:
> > +		if (trigger->supported_blink_modes == HARDWARE_ONLY)
> > +			return 0;
> > +		break;
> > +	case HARDWARE_CONTROLLED:
> > +		if (trigger->supported_blink_modes == SOFTWARE_ONLY)
> > +			return 0;
> > +		break;
> > +	case SOFTWARE_HARDWARE_CONTROLLED:
> > +		break;
> > +	default:
> > +		return 0;
> > +	}
> > +
> > +	return 1;
> 
> Should be returning true/false. I'm not sure I'm a fan of the style of
> this though - wouldn't the following be easier to read?
> 
> 	switch (led_cdev->blink_mode) {
> 	case SOFTWARE_CONTROLLED:
> 		return trigger->supported_blink_modes != HARDWARE_ONLY;
> 
> 	case HARDWARE_CONTROLLED:
> 		return trigger->supported_blink_modes != SOFTWARE_ONLY;
> 
> 	case SOFTWARE_HARDWARE_CONTROLLED:
> 		return true;
> 	}
> ?

Much better!

> 
> Also, does it really need a default case - without it, when the
> led_blink_modes enum is expanded and the switch statement isn't
> updated, we'll get a compiler warning which will prompt this to be
> updated - whereas, with a default case, it won't.
> 

I added the default just to mute some compiler warning. But guess if
every enum is handled the warning should not be reported.

> > @@ -188,6 +213,10 @@ int led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trig)
> >  		led_set_brightness(led_cdev, LED_OFF);
> >  	}
> >  	if (trig) {
> > +		/* Make sure the trigger support the LED blink mode */
> > +		if (!led_trigger_is_supported(led_cdev, trig))
> > +			return -EINVAL;
> 
> Shouldn't validation happen before we start taking any actions? In other
> words, before we remove the previous trigger?
> 

trigger_set first remove any trigger and set the led off. Then apply the
new trigger. So the validation is done only when a trigger is actually
applied. Think we should understand the best case here.

> > @@ -350,12 +381,26 @@ static inline bool led_sysfs_is_disabled(struct led_classdev *led_cdev)
> >  
> >  #define TRIG_NAME_MAX 50
> >  
> > +enum led_trigger_blink_supported_modes {
> > +	SOFTWARE_ONLY = SOFTWARE_CONTROLLED,
> > +	HARDWARE_ONLY = HARDWARE_CONTROLLED,
> > +	SOFTWARE_HARDWARE = SOFTWARE_HARDWARE_CONTROLLED,
> 
> I suspect all these generic names are asking for eventual namespace
> clashes. Maybe prefix them with LED_ ?

Agree they are pretty generic so I can see why... My only concern was
making them too long... Maybe reduce them to SW or HW? LEDS_SW_ONLY...
LEDS_SW_CONTROLLED?

> 
> Thanks.
> 
> -- 
> RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
> FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

-- 
	Ansuel



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux