Re: [PATCH v4 37/39] x86: Add PTRACE interface for shadow stack

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rick,

On Fri, Dec 02, 2022 at 04:36:04PM -0800, Rick Edgecombe wrote:
> From: Yu-cheng Yu <yu-cheng.yu@xxxxxxxxx>
> 
> Some applications (like GDB) would like to tweak shadow stack state via
> ptrace. This allows for existing functionality to continue to work for
> seized shadow stack applications. Provide an regset interface for
> manipulating the shadow stack pointer (SSP).
> 
> There is already ptrace functionality for accessing xstate, but this
> does not include supervisor xfeatures. So there is not a completely
> clear place for where to put the shadow stack state. Adding it to the
> user xfeatures regset would complicate that code, as it currently shares
> logic with signals which should not have supervisor features.
> 
> Don't add a general supervisor xfeature regset like the user one,
> because it is better to maintain flexibility for other supervisor
> xfeatures to define their own interface. For example, an xfeature may
> decide not to expose all of it's state to userspace, as is actually the
> case for  shadow stack ptrace functionality. A lot of enum values remain
> to be used, so just put it in dedicated shadow stack regset.
> 
> The only downside to not having a generic supervisor xfeature regset,
> is that apps need to be enlightened of any new supervisor xfeature
> exposed this way (i.e. they can't try to have generic save/restore
> logic). But maybe that is a good thing, because they have to think
> through each new xfeature instead of encountering issues when new a new
> supervisor xfeature was added.
> 
> By adding a shadow stack regset, it also has the effect of including the
> shadow stack state in a core dump, which could be useful for debugging.
> 
> The shadow stack specific xstate includes the SSP, and the shadow stack
> and WRSS enablement status. Enabling shadow stack or wrss in the kernel
> involves more than just flipping the bit. The kernel is made aware that
> it has to do extra things when cloning or handling signals. That logic
> is triggered off of separate feature enablement state kept in the task
> struct. So the flipping on HW shadow stack enforcement without notifying
> the kernel to change its behavior would severely limit what an application
> could do without crashing, and the results would depend on kernel
> internal implementation details. There is also no known use for controlling
> this state via prtace today. So only expose the SSP, which is something
> that userspace already has indirect control over.
> 
> Tested-by: Pengfei Xu <pengfei.xu@xxxxxxxxx>
> Tested-by: John Allen <john.allen@xxxxxxx>
> Co-developed-by: Rick Edgecombe <rick.p.edgecombe@xxxxxxxxx>
> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@xxxxxxxxx>
> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@xxxxxxxxx>
> ---
> 
> v4:
>  - Make shadow stack only. Reduce to only supporting SSP register, and
>    remove CET references (peterz)
>  - Add comment to not use 0x203, becuase binutils already looks for it in
>    coredumps. (Christina Schimpe)
> 
> v3:
>  - Drop dependence on thread.shstk.size, and use thread.features bits
>  - Drop 32 bit support
> 
> v2:
>  - Check alignment on ssp.
>  - Block IBT bits.
>  - Handle init states instead of returning error.
>  - Add verbose commit log justifying the design.
> 
> Yu-Cheng v12:
>  - Return -ENODEV when CET registers are in INIT state.
>  - Check reserved/non-support bits from user input.
> 
>  arch/x86/include/asm/fpu/regset.h |  7 +--
>  arch/x86/kernel/fpu/regset.c      | 87 +++++++++++++++++++++++++++++++
>  arch/x86/kernel/ptrace.c          | 12 +++++
>  include/uapi/linux/elf.h          |  2 +
>  4 files changed, 105 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/x86/include/asm/fpu/regset.h b/arch/x86/include/asm/fpu/regset.h
> index 4f928d6a367b..697b77e96025 100644
> --- a/arch/x86/include/asm/fpu/regset.h
> +++ b/arch/x86/include/asm/fpu/regset.h
> @@ -7,11 +7,12 @@
>  
>  #include <linux/regset.h>
>  
> -extern user_regset_active_fn regset_fpregs_active, regset_xregset_fpregs_active;
> +extern user_regset_active_fn regset_fpregs_active, regset_xregset_fpregs_active,
> +				ssp_active;
>  extern user_regset_get2_fn fpregs_get, xfpregs_get, fpregs_soft_get,
> -				 xstateregs_get;
> +				 xstateregs_get, ssp_get;
>  extern user_regset_set_fn fpregs_set, xfpregs_set, fpregs_soft_set,
> -				 xstateregs_set;
> +				 xstateregs_set, ssp_set;
>  
>  /*
>   * xstateregs_active == regset_fpregs_active. Please refer to the comment
> diff --git a/arch/x86/kernel/fpu/regset.c b/arch/x86/kernel/fpu/regset.c
> index 6d056b68f4ed..00f3d5c9b682 100644
> --- a/arch/x86/kernel/fpu/regset.c
> +++ b/arch/x86/kernel/fpu/regset.c
> @@ -8,6 +8,7 @@
>  #include <asm/fpu/api.h>
>  #include <asm/fpu/signal.h>
>  #include <asm/fpu/regset.h>
> +#include <asm/prctl.h>
>  
>  #include "context.h"
>  #include "internal.h"
> @@ -174,6 +175,92 @@ int xstateregs_set(struct task_struct *target, const struct user_regset *regset,
>  	return ret;
>  }
>  
> +
> +#ifdef CONFIG_X86_USER_SHADOW_STACK
> +int ssp_active(struct task_struct *target, const struct user_regset *regset)
> +{
> +	if (shstk_enabled())

This is not going to work with ptrace as shstk_enabled() checks current
rather than target.

> +		return regset->n;
> +
> +	return 0;
> +}
> +
> +int ssp_get(struct task_struct *target, const struct user_regset *regset,
> +		struct membuf to)
> +{
> +	struct fpu *fpu = &target->thread.fpu;
> +	struct cet_user_state *cetregs;
> +
> +	if (!boot_cpu_has(X86_FEATURE_USER_SHSTK))
> +		return -ENODEV;
> +
> +	sync_fpstate(fpu);
> +	cetregs = get_xsave_addr(&fpu->fpstate->regs.xsave, XFEATURE_CET_USER);
> +	if (!cetregs) {
> +		/*
> +		 * The registers are the in the init state. The init values for
> +		 * these regs are zero, so just zero the output buffer.
> +		 */
> +		membuf_zero(&to, sizeof(cetregs->user_ssp));
> +		return 0;
> +	}
> +
> +	return membuf_write(&to, (unsigned long *)&cetregs->user_ssp,
> +			    sizeof(cetregs->user_ssp));
> +}
> +
> +int ssp_set(struct task_struct *target, const struct user_regset *regset,
> +		  unsigned int pos, unsigned int count,
> +		  const void *kbuf, const void __user *ubuf)
> +{
> +	struct fpu *fpu = &target->thread.fpu;
> +	struct xregs_state *xsave = &fpu->fpstate->regs.xsave;
> +	struct cet_user_state *cetregs;
> +	unsigned long user_ssp;
> +	int r;
> +
> +	if (!boot_cpu_has(X86_FEATURE_USER_SHSTK) ||
> +	    !ssp_active(target, regset))
> +		return -ENODEV;
> +
> +	r = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &user_ssp, 0, -1);
> +	if (r)
> +		return r;
> +
> +	/*
> +	 * Some kernel instructions (IRET, etc) can cause exceptions in the case
> +	 * of disallowed CET register values. Just prevent invalid values.
> +	 */
> +	if ((user_ssp >= TASK_SIZE_MAX) || !IS_ALIGNED(user_ssp, 8))
> +		return -EINVAL;
> +
> +	fpu_force_restore(fpu);
> +
> +	/*
> +	 * Don't want to init the xfeature until the kernel will definetely
> +	 * overwrite it, otherwise if it inits and then fails out, it would
> +	 * end up initing it to random data.
> +	 */
> +	if (!xfeature_saved(xsave, XFEATURE_CET_USER) &&
> +	    WARN_ON(init_xfeature(xsave, XFEATURE_CET_USER)))
> +		return -ENODEV;
> +
> +	cetregs = get_xsave_addr(xsave, XFEATURE_CET_USER);
> +	if (WARN_ON(!cetregs)) {
> +		/*
> +		 * This shouldn't ever be NULL because it was successfully
> +		 * inited above if needed. The only scenario would be if an
> +		 * xfeature was somehow saved in a buffer, but not enabled in
> +		 * xsave.
> +		 */
> +		return -ENODEV;
> +	}
> +
> +	cetregs->user_ssp = user_ssp;
> +	return 0;
> +}
> +#endif /* CONFIG_X86_USER_SHADOW_STACK */
> +
>  #if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION
>  
>  /*
> diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
> index dfaa270a7cc9..095f04bdabdc 100644
> --- a/arch/x86/kernel/ptrace.c
> +++ b/arch/x86/kernel/ptrace.c
> @@ -58,6 +58,7 @@ enum x86_regset_64 {
>  	REGSET64_FP,
>  	REGSET64_IOPERM,
>  	REGSET64_XSTATE,
> +	REGSET64_SSP,
>  };
>  
>  #define REGSET_GENERAL \
> @@ -1267,6 +1268,17 @@ static struct user_regset x86_64_regsets[] __ro_after_init = {
>  		.active		= ioperm_active,
>  		.regset_get	= ioperm_get
>  	},
> +#ifdef CONFIG_X86_USER_SHADOW_STACK
> +	[REGSET64_SSP] = {
> +		.core_note_type	= NT_X86_SHSTK,
> +		.n		= 1,
> +		.size		= sizeof(u64),
> +		.align		= sizeof(u64),
> +		.active		= ssp_active,
> +		.regset_get	= ssp_get,
> +		.set		= ssp_set
> +	},
> +#endif
>  };
>  
>  static const struct user_regset_view user_x86_64_view = {
> diff --git a/include/uapi/linux/elf.h b/include/uapi/linux/elf.h
> index c7b056af9ef0..e9283f0641c4 100644
> --- a/include/uapi/linux/elf.h
> +++ b/include/uapi/linux/elf.h
> @@ -406,6 +406,8 @@ typedef struct elf64_shdr {
>  #define NT_386_TLS	0x200		/* i386 TLS slots (struct user_desc) */
>  #define NT_386_IOPERM	0x201		/* x86 io permission bitmap (1=deny) */
>  #define NT_X86_XSTATE	0x202		/* x86 extended state using xsave */
> +/* Old binutils treats 0x203 as a CET state */
> +#define NT_X86_SHSTK	0x204		/* x86 SHSTK state */
>  #define NT_S390_HIGH_GPRS	0x300	/* s390 upper register halves */
>  #define NT_S390_TIMER	0x301		/* s390 timer register */
>  #define NT_S390_TODCMP	0x302		/* s390 TOD clock comparator register */
> -- 
> 2.17.1
> 

-- 
Sincerely yours,
Mike.



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux