Re: [PATCH 5/7] hte: Re-phrase tegra API document

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/30/22 10:34, Dipen Patel wrote:
>> I think the wording can be better:
> I do  not understand, can you please elaborate?

Exactly where? Please quote appropriate hunks from below where do you not
understand.

>>
>> ---- >8 ----
>>
>> diff --git a/Documentation/driver-api/hte/tegra194-hte.rst b/Documentation/driver-api/hte/tegra194-hte.rst
>> index 85e654772782c1..13c45bfc03a75e 100644
>> --- a/Documentation/driver-api/hte/tegra194-hte.rst
>> +++ b/Documentation/driver-api/hte/tegra194-hte.rst
>> @@ -5,11 +5,11 @@ HTE Kernel provider driver
>>  
>>  Description
>>  -----------
>> -The Nvidia tegra HTE provider also known as GTE (Generic Timestamping Engine)
>> -driver implements two GTE instances: 1) GPIO GTE and 2) LIC
>> -(Legacy Interrupt Controller) IRQ GTE. Both GTE instances get the timestamp
>> -from the system counter TSC which has 31.25MHz clock rate, and the driver
>> -converts clock tick rate to nanoseconds before storing it as timestamp value.
>> +The Nvidia tegra HTE provider, also known as GTE (Generic Timestamping Engine)
>> +driver implements two GTE instances: GPIO GTE and LIC (Legacy Interrupt
>> +Controller) IRQ GTE. Both GTE instances get the timestamp from system counter
>> +TSC which has 31.25MHz clock rate, and the driver converts clock tick rate to
>> +nanoseconds before storing it as timestamp value.
>>  
>>  GPIO GTE
>>  --------
>> @@ -19,17 +19,17 @@ needs to be configured as input. Only the always on (AON) GPIO controller
>>  instance supports timestamping GPIOs in real time as it is tightly coupled with
>>  the GPIO GTE. To support this, GPIOLIB adds two optional APIs as mentioned
>>  below. The GPIO GTE code supports both kernel and userspace consumers. The
>> -kernel space consumers can directly talk to HTE subsystem while userspace
>> -consumers timestamp requests go through GPIOLIB CDEV framework to HTE
>> -subsystem. The hte devicetree binding described at
>> -``Documentation/devicetree/bindings/timestamp`` provides an example of how a
>> -consumer can request an GPIO line.
>> +kernel space consumers can directly talk to HTE subsystem while requests from
>> +userspace consumers go through GPIOLIB CDEV framework to HTE subsystem. The hte
>> +devicetree binding described at ``Documentation/devicetree/bindings/timestamp``
>> +provides an example of how a consumer can request an GPIO line.
>>  
>> -See gpiod_enable_hw_timestamp_ns() and gpiod_disable_hw_timestamp_ns().
>> +To toggle hardware timestamp, use gpiod_enable_hw_timestamp_ns() and
>> +gpiod_disable_hw_timestamp_ns().
>>  
>>  For userspace consumers, GPIO_V2_LINE_FLAG_EVENT_CLOCK_HTE flag must be
>> -specified during IOCTL calls. Refer to ``tools/gpio/gpio-event-mon.c``, which
>> -returns the timestamp in nanoseconds.
>> +specified during IOCTL calls. Refer to ``tools/gpio/gpio-event-mon.c`` for
>> +example.
>>  
>>  LIC (Legacy Interrupt Controller) IRQ GTE
>>  -----------------------------------------
>>

Thanks anyway.

-- 
An old man doll... just what I always wanted! - Clara




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux