The dpaa2-switch has the exact same locking requirements when connected to a DPMAC, so it needs port_priv->mac to always point either to NULL, or to a DPMAC with a fully initialized phylink instance. Make the same preparatory change in the dpaa2-switch driver as in the dpaa2-eth one. Signed-off-by: Vladimir Oltean <vladimir.oltean@xxxxxxx> --- .../ethernet/freescale/dpaa2/dpaa2-switch.c | 21 +++++++++++-------- 1 file changed, 12 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c index 42d3290ccd8b..3b0963d95f67 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c @@ -1449,9 +1449,8 @@ static int dpaa2_switch_port_connect_mac(struct ethsw_port_priv *port_priv) err = dpaa2_mac_open(mac); if (err) goto err_free_mac; - port_priv->mac = mac; - if (dpaa2_switch_port_is_type_phy(port_priv)) { + if (dpaa2_mac_is_type_phy(mac)) { err = dpaa2_mac_connect(mac); if (err) { netdev_err(port_priv->netdev, @@ -1461,11 +1460,12 @@ static int dpaa2_switch_port_connect_mac(struct ethsw_port_priv *port_priv) } } + port_priv->mac = mac; + return 0; err_close_mac: dpaa2_mac_close(mac); - port_priv->mac = NULL; err_free_mac: kfree(mac); return err; @@ -1473,15 +1473,18 @@ static int dpaa2_switch_port_connect_mac(struct ethsw_port_priv *port_priv) static void dpaa2_switch_port_disconnect_mac(struct ethsw_port_priv *port_priv) { - if (dpaa2_switch_port_is_type_phy(port_priv)) - dpaa2_mac_disconnect(port_priv->mac); + struct dpaa2_mac *mac = port_priv->mac; - if (!dpaa2_switch_port_has_mac(port_priv)) + port_priv->mac = NULL; + + if (!mac) return; - dpaa2_mac_close(port_priv->mac); - kfree(port_priv->mac); - port_priv->mac = NULL; + if (dpaa2_mac_is_type_phy(mac)) + dpaa2_mac_disconnect(mac); + + dpaa2_mac_close(mac); + kfree(mac); } static irqreturn_t dpaa2_switch_irq0_handler_thread(int irq_num, void *arg) -- 2.34.1