On 17:55-20130702, Luciano Coelho wrote:
> Instead of defining an enumeration with the FW specific values for the
> different clock rates, use the actual frequency instead. Also add a
> boolean to specify whether the clock is XTAL or not.
>
> Change all board files to reflect this.
>
> Cc: Tony Lindgren <tony@xxxxxxxxxxx>
> Cc: Sekhar Nori <nsekhar@xxxxxx>
> Signed-off-by: Luciano Coelho <coelho@xxxxxx>
> ---
> arch/arm/mach-davinci/board-da850-evm.c | 3 +-
> arch/arm/mach-omap2/board-4430sdp.c | 5 ++-
^^
> arch/arm/mach-omap2/board-omap3evm.c | 3 +-
> arch/arm/mach-omap2/board-omap4panda.c | 3 +-
^^
Please do not add more platform data to platforms that are DT only.
> arch/arm/mach-omap2/board-zoom-peripherals.c | 3 +-
> drivers/net/wireless/ti/wl12xx/main.c | 58 +++++++++++++++++++++++++-
> drivers/net/wireless/ti/wl12xx/wl12xx.h | 28 +++++++++++++
> include/linux/wl12xx.h | 28 ++-----------
> 8 files changed, 99 insertions(+), 32 deletions(-)
>
> diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
> index d2a2a98..202f3d0 100644
> --- a/arch/arm/mach-davinci/board-da850-evm.c
> +++ b/arch/arm/mach-davinci/board-da850-evm.c
> @@ -1378,7 +1378,8 @@ static const short da850_wl12xx_pins[] __initconst = {
> static struct wl12xx_platform_data da850_wl12xx_wlan_data __initdata = {
> .irq = -1,
> .irq_flags = IRQF_TRIGGER_RISING,
> - .board_ref_clock = WL12XX_REFCLOCK_38,
> + .ref_clock_freq = 38400000,
> + .ref_clock_xtal = false,
> };
>
> static __init int da850_wl12xx_init(void)
> diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
> index c2334aa..da2b892 100644
> --- a/arch/arm/mach-omap2/board-4430sdp.c
> +++ b/arch/arm/mach-omap2/board-4430sdp.c
> @@ -694,8 +694,9 @@ static void __init omap4_sdp4430_wifi_mux_init(void)
>
> static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = {
> .irq_flags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> - .board_ref_clock = WL12XX_REFCLOCK_26,
> - .board_tcxo_clock = WL12XX_TCXOCLOCK_26,
> + .ref_clock_freq = 26000000,
> + .ref_clock_xtal = false,
> + .tcxo_clock_freq = 26000000,
> };
>
> static void __init omap4_sdp4430_wifi_init(void)
> diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
> index a0c0adf..d24435c 100644
> --- a/arch/arm/mach-omap2/board-omap3evm.c
> +++ b/arch/arm/mach-omap2/board-omap3evm.c
> @@ -459,7 +459,8 @@ static struct platform_device omap3evm_wlan_regulator = {
>
> struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
> .irq_flags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> - .board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */
> + .ref_clock_freq = 38400000,
> + .ref_clock_xtal = false,
> };
> #endif
>
> diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
> index ba00862..ac6413c 100644
> --- a/arch/arm/mach-omap2/board-omap4panda.c
> +++ b/arch/arm/mach-omap2/board-omap4panda.c
> @@ -231,7 +231,8 @@ static struct platform_device omap_vwlan_device = {
>
> static struct wl12xx_platform_data omap_panda_wlan_data __initdata = {
> .irq_flags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> - .board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */
> + .ref_clock_freq = 38400000,
> + .ref_clock_xtal = false,
> };
>
> static struct twl6040_codec_data twl6040_codec = {
> diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
> index ced012c..f4f4fe7 100644
> --- a/arch/arm/mach-omap2/board-zoom-peripherals.c
> +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
> @@ -245,7 +245,8 @@ static struct platform_device *zoom_devices[] __initdata = {
>
> static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = {
> .irq_flags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> - .board_ref_clock = WL12XX_REFCLOCK_26, /* 26 MHz */
> + .ref_clock_freq = 26000000,
> + .ref_clock_xtal = false,
> };
>
> static struct omap2_hsmmc_info mmc[] = {
> diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
> index 1c627da..903dcb3 100644
> --- a/drivers/net/wireless/ti/wl12xx/main.c
> +++ b/drivers/net/wireless/ti/wl12xx/main.c
> @@ -1701,6 +1701,42 @@ static struct ieee80211_sta_ht_cap wl12xx_ht_cap = {
> },
> };
>
> +static struct wl12xx_clock wl12xx_refclock_table[] = {
> + { 19200000, false, WL12XX_REFCLOCK_19 },
> + { 26000000, false, WL12XX_REFCLOCK_26 },
> + { 26000000, true, WL12XX_REFCLOCK_26_XTAL },
> + { 38400000, false, WL12XX_REFCLOCK_38 },
> + { 38400000, true, WL12XX_REFCLOCK_38_XTAL },
> + { 52000000, false, WL12XX_REFCLOCK_52 },
> + { 0, false, 0 }
> +};
> +
> +static struct wl12xx_clock wl12xx_tcxoclock_table[] = {
> + { 16368000, false, WL12XX_TCXOCLOCK_16_368 },
> + { 16800000, false, WL12XX_TCXOCLOCK_16_8 },
> + { 19200000, false, WL12XX_TCXOCLOCK_19_2 },
> + { 26000000, false, WL12XX_TCXOCLOCK_26 },
> + { 32736000, false, WL12XX_TCXOCLOCK_32_736 },
> + { 33600000, false, WL12XX_TCXOCLOCK_33_6 },
> + { 38400000, false, WL12XX_TCXOCLOCK_38_4 },
> + { 52000000, false, WL12XX_TCXOCLOCK_52 },
> + { 0, false, 0 }
> +};
> +
> +static int wl12xx_get_clock_idx(struct wl12xx_clock *table, u32 freq, bool xtal)
> +{
> + int i = 0;
> +
> + while(table[i].freq != 0) {
> + if ((table[i].freq == freq) &&
> + (table[i].xtal == xtal))
> + return table[i].hw_idx;
> + i++;
> + };
> +
> + return -EINVAL;
> +}
> +
> static int wl12xx_setup(struct wl1271 *wl)
> {
> struct wl12xx_priv *priv = wl->priv;
> @@ -1722,7 +1758,16 @@ static int wl12xx_setup(struct wl1271 *wl)
> wl12xx_conf_init(wl);
>
> if (!fref_param) {
> - priv->ref_clock = pdata->board_ref_clock;
> + priv->ref_clock = wl12xx_get_clock_idx(wl12xx_refclock_table,
> + pdata->ref_clock_freq,
> + pdata->ref_clock_xtal);
> + if (priv->ref_clock < 0) {
> + wl1271_error("Invalid ref_clock frequency (%d Hz, %s)",
> + pdata->ref_clock_freq,
> + pdata->ref_clock_xtal ? "XTAL" : "not XTAL");
> +
> + return priv->ref_clock;
> + }
> } else {
> if (!strcmp(fref_param, "19.2"))
> priv->ref_clock = WL12XX_REFCLOCK_19;
> @@ -1741,7 +1786,16 @@ static int wl12xx_setup(struct wl1271 *wl)
> }
>
> if (!tcxo_param) {
> - priv->tcxo_clock = pdata->board_tcxo_clock;
> + priv->tcxo_clock = wl12xx_get_clock_idx(wl12xx_tcxoclock_table,
> + pdata->tcxo_clock_freq,
> + pdata->tcxo_clock_xtal);
> + if (priv->tcxo_clock < 0) {
> + wl1271_error("Invalid tcxo_clock frequency (%d Hz, %s)",
> + pdata->tcxo_clock_freq,
> + pdata->tcxo_clock_xtal ? "XTAL" : "not XTAL");
> +
> + return priv->tcxo_clock;
> + }
> } else {
> if (!strcmp(tcxo_param, "19.2"))
> priv->tcxo_clock = WL12XX_TCXOCLOCK_19_2;
> diff --git a/drivers/net/wireless/ti/wl12xx/wl12xx.h b/drivers/net/wireless/ti/wl12xx/wl12xx.h
> index 9e5484a..05f631b 100644
> --- a/drivers/net/wireless/ti/wl12xx/wl12xx.h
> +++ b/drivers/net/wireless/ti/wl12xx/wl12xx.h
> @@ -79,4 +79,32 @@ struct wl12xx_priv {
> struct wl127x_rx_mem_pool_addr *rx_mem_addr;
> };
>
> +/* Reference clock values */
> +enum {
> + WL12XX_REFCLOCK_19 = 0, /* 19.2 MHz */
> + WL12XX_REFCLOCK_26 = 1, /* 26 MHz */
> + WL12XX_REFCLOCK_38 = 2, /* 38.4 MHz */
> + WL12XX_REFCLOCK_52 = 3, /* 52 MHz */
> + WL12XX_REFCLOCK_38_XTAL = 4, /* 38.4 MHz, XTAL */
> + WL12XX_REFCLOCK_26_XTAL = 5, /* 26 MHz, XTAL */
> +};
> +
> +/* TCXO clock values */
> +enum {
> + WL12XX_TCXOCLOCK_19_2 = 0, /* 19.2MHz */
> + WL12XX_TCXOCLOCK_26 = 1, /* 26 MHz */
> + WL12XX_TCXOCLOCK_38_4 = 2, /* 38.4MHz */
> + WL12XX_TCXOCLOCK_52 = 3, /* 52 MHz */
> + WL12XX_TCXOCLOCK_16_368 = 4, /* 16.368 MHz */
> + WL12XX_TCXOCLOCK_32_736 = 5, /* 32.736 MHz */
> + WL12XX_TCXOCLOCK_16_8 = 6, /* 16.8 MHz */
> + WL12XX_TCXOCLOCK_33_6 = 7, /* 33.6 MHz */
> +};
> +
> +struct wl12xx_clock {
> + u32 freq;
> + bool xtal;
> + u8 hw_idx;
> +};
> +
> #endif /* __WL12XX_PRIV_H__ */
> diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h
> index 1e4ed6e..4982b94 100644
> --- a/include/linux/wl12xx.h
> +++ b/include/linux/wl12xx.h
> @@ -26,28 +26,6 @@
>
> #include <linux/err.h>
>
> -/* Reference clock values */
> -enum {
> - WL12XX_REFCLOCK_19 = 0, /* 19.2 MHz */
> - WL12XX_REFCLOCK_26 = 1, /* 26 MHz */
> - WL12XX_REFCLOCK_38 = 2, /* 38.4 MHz */
> - WL12XX_REFCLOCK_52 = 3, /* 52 MHz */
> - WL12XX_REFCLOCK_38_XTAL = 4, /* 38.4 MHz, XTAL */
> - WL12XX_REFCLOCK_26_XTAL = 5, /* 26 MHz, XTAL */
> -};
> -
> -/* TCXO clock values */
> -enum {
> - WL12XX_TCXOCLOCK_19_2 = 0, /* 19.2MHz */
> - WL12XX_TCXOCLOCK_26 = 1, /* 26 MHz */
> - WL12XX_TCXOCLOCK_38_4 = 2, /* 38.4MHz */
> - WL12XX_TCXOCLOCK_52 = 3, /* 52 MHz */
> - WL12XX_TCXOCLOCK_16_368 = 4, /* 16.368 MHz */
> - WL12XX_TCXOCLOCK_32_736 = 5, /* 32.736 MHz */
> - WL12XX_TCXOCLOCK_16_8 = 6, /* 16.8 MHz */
> - WL12XX_TCXOCLOCK_33_6 = 7, /* 33.6 MHz */
> -};
> -
> struct wl1251_platform_data {
> void (*set_power)(bool enable);
> /* SDIO only: IRQ number if WLAN_IRQ line is used, 0 for SDIO IRQs */
> @@ -58,8 +36,10 @@ struct wl1251_platform_data {
> struct wl12xx_platform_data {
> int irq;
> unsigned long irq_flags;
> - int board_ref_clock;
> - int board_tcxo_clock;
> + int ref_clock_freq; /* in Hertz */
> + bool ref_clock_xtal; /* specify whether the clock is XTAL or not */
> + int tcxo_clock_freq; /* in Hertz */
> + bool tcxo_clock_xtal; /* specify whether the clock is XTAL or not */
> };
>
> #ifdef CONFIG_WILINK_PLATFORM_DATA
> --
> 1.7.10.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
