[PATCH v13 2/2] Documentation: Add document for UltraSoc SMB drivers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Qi Liu <liuqi115@xxxxxxxxxx>

This patch bring in documentation for UltraSoc SMB drivers.
It simply describes the device, sysfs interface and the
firmware bindings.

Signed-off-by: Qi Liu <liuqi115@xxxxxxxxxx>
Signed-off-by: Junhao He <hejunhao3@xxxxxxxxxx>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
---
 .../sysfs-bus-coresight-devices-ultra_smb     | 31 +++++++
 .../trace/coresight/ultrasoc-smb.rst          | 82 +++++++++++++++++++
 2 files changed, 113 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
 create mode 100644 Documentation/trace/coresight/ultrasoc-smb.rst

diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
new file mode 100644
index 000000000000..deaefd508105
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
@@ -0,0 +1,31 @@
+What:		/sys/bus/coresight/devices/ultra_smb<N>/enable_sink
+Date:		November 2022
+KernelVersion:	6.2
+Contact:	Junhao He <hejunhao3@xxxxxxxxxx>
+Description:	(RW) Add/remove a SMB device from a trace path. There can be
+		multiple sources for a single SMB device.
+
+What:		/sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_size
+Date:		November 2022
+KernelVersion:	6.2
+Contact:	Junhao He <hejunhao3@xxxxxxxxxx>
+Description:	(Read) Shows the buffer size of each UltraSoc SMB device.
+
+What:		/sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_status
+Date:		November 2022
+KernelVersion:	6.2
+Contact:	Junhao He <hejunhao3@xxxxxxxxxx>
+Description:	(Read) Shows the value held by UltraSoc SMB status register.
+		BIT(0) is zero means buffer is empty.
+
+What:		/sys/bus/coresight/devices/ultra_smb<N>/mgmt/read_pos
+Date:		November 2022
+KernelVersion:	6.2
+Contact:	Junhao He <hejunhao3@xxxxxxxxxx>
+Description:	(Read) Shows the value held by UltraSoc SMB Read Pointer register.
+
+What:		/sys/bus/coresight/devices/ultra_smb<N>/mgmt/write_pos
+Date:		November 2022
+KernelVersion:	6.2
+Contact:	Junhao He <hejunhao3@xxxxxxxxxx>
+Description:	(Read) Shows the value held by UltraSoc SMB Write Pointer register.
diff --git a/Documentation/trace/coresight/ultrasoc-smb.rst b/Documentation/trace/coresight/ultrasoc-smb.rst
new file mode 100644
index 000000000000..b7fe3f5c7f53
--- /dev/null
+++ b/Documentation/trace/coresight/ultrasoc-smb.rst
@@ -0,0 +1,82 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================
+UltraSoc - HW Assisted Tracing on SoC
+======================================
+   :Author:   Qi Liu <liuqi115@xxxxxxxxxx>
+   :Date:     March 2022
+
+Introduction
+------------
+
+UltraSoc SMB is a per SCCL(Super CPU Cluster) hardware, and it provides a
+way to buffer and store CPU trace messages in a region of shared system
+memory. SMB is plugged as a coresight sink device and the corresponding
+trace generators (ETM) are plugged in as source devices.
+
+Sysfs files and directories
+---------------------------
+
+The SMB devices appear on the existing coresight bus alongside the other
+coresight devices::
+
+	$# ls /sys/bus/coresight/devices/
+	ultra_smb0   ultra_smb1   ultra_smb2   ultra_smb3
+
+The ``ultra_smb<N>`` named SMB associated with SCCL.::
+
+	$# ls /sys/bus/coresight/devices/ultra_smb0
+	enable_sink   mgmt
+	$# ls /sys/bus/coresight/devices/ultra_smb0/mgmt
+	buf_size  buf_status  read_pos  write_pos
+
+*Key file items are:-*
+   * ``read_pos``: Shows the value held by UltraSoc SMB Read Pointer register.
+   * ``write_pos``: Shows the value held by UltraSoc SMB Write Pointer register.
+   * ``buf_status``: Shows the value held by UltraSoc SMB status register.
+		     BIT(0) is zero means buffer is empty.
+   * ``buf_size``: Shows the buffer size of each UltraSoc SMB device.
+
+Firmware Bindings
+---------------------------
+
+SMB device is only supported with ACPI, and ACPI binding of SMB device
+describes SMB device indentifier, resource information and graph structure.
+
+SMB is identified by ACPI HID "HISI03A1", resource of device is declared using
+the _CRS method. Each SMB must present two base address, the first one is the
+configuration base address of SMB device, the second one is the 32bits base
+address of shared system memory.
+
+examples::
+
+    Device(USMB) {                                               \
+      Name(_HID, "HISI03A1")                                     \
+      Name(_CRS, ResourceTemplate() {                            \
+          QWordMemory (ResourceConsumer, , MinFixed, MaxFixed, NonCacheable, \
+		       ReadWrite, 0x0, 0x95100000, 0x951FFFFF, 0x0, 0x100000) \
+          QWordMemory (ResourceConsumer, , MinFixed, MaxFixed, Cacheable, \
+		       ReadWrite, 0x0, 0x50000000, 0x53FFFFFF, 0x0, 0x4000000) \
+      })                                                         \
+      Name(_DSD, Package() {                                     \
+        ToUUID("ab02a46b-74c7-45a2-bd68-f7d344ef2153"),          \
+	/* Use CoreSight Graph ACPI bindings to describe connections topology */
+        Package() {                                              \
+          0,                                                     \
+          1,                                                     \
+          Package() {                                            \
+            1,                                                   \
+            ToUUID("3ecbc8b6-1d0e-4fb3-8107-e627f805c6cd"),      \
+            8,                                                   \
+            Package() {0x8, 0, \_SB.S00.SL11.CL28.F008, 0},       \
+            Package() {0x9, 0, \_SB.S00.SL11.CL29.F009, 0},       \
+            Package() {0xa, 0, \_SB.S00.SL11.CL2A.F010, 0},       \
+            Package() {0xb, 0, \_SB.S00.SL11.CL2B.F011, 0},       \
+            Package() {0xc, 0, \_SB.S00.SL11.CL2C.F012, 0},       \
+            Package() {0xd, 0, \_SB.S00.SL11.CL2D.F013, 0},       \
+            Package() {0xe, 0, \_SB.S00.SL11.CL2E.F014, 0},       \
+            Package() {0xf, 0, \_SB.S00.SL11.CL2F.F015, 0},       \
+          }                                                      \
+        }                                                        \
+      })                                                         \
+    }
-- 
2.33.0




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux