This makes it easy to add SMP support for new targets
by adding cpus property and the release sequence.
We add the enable-method property for the cpus property to
specify which release sequence to use.
While at it, add the 8660 cpus bindings to make SMP work.
Signed-off-by: Rohit Vaswani <rvaswani@xxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/arm/cpus.txt | 6 ++
Documentation/devicetree/bindings/arm/msm/scss.txt | 15 ++++
arch/arm/boot/dts/msm8660-surf.dts | 23 +++++-
arch/arm/mach-msm/platsmp.c | 96 ++++++++++++++++------
4 files changed, 116 insertions(+), 24 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/msm/scss.txt
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index f32494d..327aad2 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -44,6 +44,12 @@ For the ARM architecture every CPU node must contain the following properties:
"marvell,mohawk"
"marvell,xsc3"
"marvell,xscale"
+ "qcom,scorpion"
+- enable-method: Specifies the method used to enable or take the secondary cores
+ out of reset. This allows different reset sequence for
+ different types of cpus.
+ This should be one of:
+ "qcom,scss"
Example:
diff --git a/Documentation/devicetree/bindings/arm/msm/scss.txt b/Documentation/devicetree/bindings/arm/msm/scss.txt
new file mode 100644
index 0000000..21c3e26
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/msm/scss.txt
@@ -0,0 +1,15 @@
+* SCSS - Scorpion Sub-system
+
+Properties
+
+- compatible : Should contain "qcom,scss".
+
+- reg: Specifies the base address for the SCSS registers used for
+ booting up secondary cores.
+
+Example:
+
+ scss@902000 {
+ compatible = "qcom,scss";
+ reg = <0x00902000 0x2000>;
+ };
diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts
index cdc010e..203e51a 100644
--- a/arch/arm/boot/dts/msm8660-surf.dts
+++ b/arch/arm/boot/dts/msm8660-surf.dts
@@ -7,6 +7,22 @@
compatible = "qcom,msm8660-surf", "qcom,msm8660";
interrupt-parent = <&intc>;
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "qcom,scorpion";
+ device_type = "cpu";
+ enable-method = "qcom,scss";
+
+ cpu@0 {
+ reg = <0>;
+ };
+
+ cpu@1 {
+ reg = <1>;
+ };
+ };
+
intc: interrupt-controller@2080000 {
compatible = "qcom,msm-8660-qgic";
interrupt-controller;
@@ -37,7 +53,12 @@
#interrupt-cells = <2>;
};
- serial@19c40000 {
+ scss@902000 {
+ compatible = "qcom,scss";
+ reg = <0x00902000 0x2000>;
+ };
+
+ serial@19c400000 {
compatible = "qcom,msm-hsuart", "qcom,msm-uart";
reg = <0x19c40000 0x1000>,
<0x19c00000 0x1000>;
diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
index 7d48759..17022e0 100644
--- a/arch/arm/mach-msm/platsmp.c
+++ b/arch/arm/mach-msm/platsmp.c
@@ -13,6 +13,8 @@
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/jiffies.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/smp.h>
#include <linux/io.h>
@@ -38,7 +40,7 @@ static inline int get_core_count(void)
return ((read_cpuid_id() >> 4) & 3) + 1;
}
-static void __cpuinit msm_secondary_init(unsigned int cpu)
+static void msm_secondary_init(unsigned int cpu)
{
/*
* Synchronise with the boot thread.
@@ -47,35 +49,63 @@ static void __cpuinit msm_secondary_init(unsigned int cpu)
spin_unlock(&boot_lock);
}
-static __cpuinit void prepare_cold_cpu(unsigned int cpu)
+static int scorpion_release_secondary(void)
{
- int ret;
- ret = scm_set_boot_addr(virt_to_phys(secondary_startup),
- SCM_FLAG_COLDBOOT_CPU1);
- if (ret == 0) {
- void __iomem *sc1_base_ptr;
- sc1_base_ptr = ioremap_nocache(0x00902000, SZ_4K*2);
- if (sc1_base_ptr) {
- writel(0, sc1_base_ptr + VDD_SC1_ARRAY_CLAMP_GFS_CTL);
- writel(0, sc1_base_ptr + SCSS_CPU1CORE_RESET);
- writel(3, sc1_base_ptr + SCSS_DBG_STATUS_CORE_PWRDUP);
- iounmap(sc1_base_ptr);
- }
- } else
- printk(KERN_DEBUG "Failed to set secondary core boot "
- "address\n");
+ void __iomem *sc1_base_ptr;
+ struct device_node *dn = NULL;
+
+ dn = of_find_compatible_node(dn, NULL, "qcom,scss");
+ if (!dn) {
+ pr_err("%s: Missing scss node in device tree\n", __func__);
+ return -ENXIO;
+ }
+
+ sc1_base_ptr = of_iomap(dn, 0);
+ if (sc1_base_ptr) {
+ writel_relaxed(0, sc1_base_ptr + VDD_SC1_ARRAY_CLAMP_GFS_CTL);
+ writel_relaxed(0, sc1_base_ptr + SCSS_CPU1CORE_RESET);
+ writel_relaxed(3, sc1_base_ptr + SCSS_DBG_STATUS_CORE_PWRDUP);
+ mb();
+ iounmap(sc1_base_ptr);
+ } else {
+ return -ENOMEM;
+ }
+
+ return 0;
}
-static int __cpuinit msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static DEFINE_PER_CPU(int, cold_boot_done);
+
+static void boot_cold_cpu(unsigned int cpu)
{
- static int cold_boot_done;
+ const char *enable_method;
+ struct device_node *dn = NULL;
- /* Only need to bring cpu out of reset this way once */
- if (cold_boot_done == false) {
- prepare_cold_cpu(cpu);
- cold_boot_done = true;
+ dn = of_find_node_by_name(dn, "cpus");
+ if (!dn) {
+ pr_err("%s: Missing node cpus in device tree\n", __func__);
+ return;
}
+ enable_method = of_get_property(dn, "enable-method", NULL);
+ if (!enable_method) {
+ pr_err("%s: cpus node is missing enable-method property\n",
+ __func__);
+ } else if (!strcmp(enable_method, "qcom,scss")) {
+ if (per_cpu(cold_boot_done, cpu) == false) {
+ scorpion_release_secondary();
+ per_cpu(cold_boot_done, cpu) = true;
+ }
+ } else {
+ pr_err("%s: Invalid enable-method property: %s\n",
+ __func__, enable_method);
+ }
+}
+
+static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ boot_cold_cpu(cpu);
+
/*
* set synchronisation state between this boot processor
* and the secondary one
@@ -118,8 +148,28 @@ static void __init msm_smp_init_cpus(void)
set_cpu_possible(i, true);
}
+static const int cold_boot_flags[] __initconst = {
+ 0,
+ SCM_FLAG_COLDBOOT_CPU1,
+};
+
static void __init msm_smp_prepare_cpus(unsigned int max_cpus)
{
+ int cpu, map;
+ unsigned int flags = 0;
+
+ for_each_present_cpu(cpu) {
+ map = cpu_logical_map(cpu);
+ if (map > ARRAY_SIZE(cold_boot_flags)) {
+ set_cpu_present(cpu, false);
+ __WARN();
+ continue;
+ }
+ flags |= cold_boot_flags[map];
+ }
+
+ if (scm_set_boot_addr(virt_to_phys(secondary_startup), flags))
+ pr_warn("Failed to set CPU boot address\n");
}
struct smp_operations msm_smp_ops __initdata = {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
