Re: [PATCH v1 1/6] hwmon: (gxp-fan-ctrl) Add GXP fan controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Nov 04, 2022 at 02:36:52PM -0500, nick.hawkins@xxxxxxx wrote:
> From: Nick Hawkins <nick.hawkins@xxxxxxx>
> 
> The GXP SoC can support up to 16 fans through the interface provided by
> the CPLD. The fans speeds are controlled via a pwm value 0-255. The fans
> are also capable of reporting if they have failed to the CPLD which in
> turn reports the status to the GXP SoC. There are no tachometers so fan
> speeds are reported as a percent of the pwm value.

Drop the last sentence and the associated code. More on that below.

> 
> Signed-off-by: Nick Hawkins <nick.hawkins@xxxxxxx>
> ---
>  Documentation/hwmon/gxp-fan-ctrl.rst |  36 +++

Needs to be added to Documentation/hwmon/index.rst.

>  drivers/hwmon/Kconfig                |   8 +
>  drivers/hwmon/Makefile               |   1 +
>  drivers/hwmon/gxp-fan-ctrl.c         | 362 +++++++++++++++++++++++++++
>  4 files changed, 407 insertions(+)
>  create mode 100644 Documentation/hwmon/gxp-fan-ctrl.rst
>  create mode 100644 drivers/hwmon/gxp-fan-ctrl.c
> 
> diff --git a/Documentation/hwmon/gxp-fan-ctrl.rst b/Documentation/hwmon/gxp-fan-ctrl.rst
> new file mode 100644
> index 000000000000..fc1709fb113b
> --- /dev/null
> +++ b/Documentation/hwmon/gxp-fan-ctrl.rst
> @@ -0,0 +1,36 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +Kernel driver gxp-fan-ctrl
> +==========================
> +
> +Supported chips:
> +
> +  * HPE GXP SOC
> +
> +Author: Nick Hawkins <nick.hawkins@xxxxxxx>
> +
> +
> +Description
> +-----------
> +
> +gxp-fan-ctrl is a driver which provides fan control for the hpe gxp soc.
> +The driver allows the gathering of fan status and the use of fan
> +pwm control.
> +
> +
> +Usage Notes
> +-----------
> +
> +Traditionally fanY_input returns an RPM value, on HPE GXP systems it is
> +the pwm value [0-255] due to the fan speeds being reported as
> +percentages.

It seems to me what is reported is the pwm value sent to the fan,
and the code stringly suggests that this is the case. If the chip
or controller doesn't report anything else, don't claim that this
has any relation to the fan speed, and just report the pwm value.

> +
> +
> +Sysfs attributes
> +----------------
> +
> +======================= =================================================
> +pwm[0-15]		Fan 0 to 15 respective pwm value
> +fan[0-15]_input		Fan 0 to 15 respective input value: pwm value
> +fan[0-15]_fault		Fan 0 to 15 respective fault status: 1 fail, 0 ok
> +======================= =================================================
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index e70d9614bec2..3d32cd77424c 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -2303,6 +2303,14 @@ config SENSORS_INTEL_M10_BMC_HWMON
>  	  sensors monitor various telemetry data of different components on the
>  	  card, e.g. board temperature, FPGA core temperature/voltage/current.
>  
> +config SENSORS_GXP_FAN_CTRL
> +	tristate "GXP Fan Control driver"
> +	depends on ARCH_HPE_GXP || COMPILE_TEST
> +	help
> +	  If you say yes here you get support for GXP fan control functionality.
> +	  The GXP controls fan function via the CPLD through the use of PWM
> +	  registers. This driver reports status and pwm setting of the fans.
> +
>  if ACPI
>  
>  comment "ACPI drivers"
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index 007e829d1d0d..b474dcc708c4 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -83,6 +83,7 @@ obj-$(CONFIG_SENSORS_GL518SM)	+= gl518sm.o
>  obj-$(CONFIG_SENSORS_GL520SM)	+= gl520sm.o
>  obj-$(CONFIG_SENSORS_GSC)	+= gsc-hwmon.o
>  obj-$(CONFIG_SENSORS_GPIO_FAN)	+= gpio-fan.o
> +obj-$(CONFIG_SENSORS_GXP_FAN_CTRL) += gxp-fan-ctrl.o
>  obj-$(CONFIG_SENSORS_HIH6130)	+= hih6130.o
>  obj-$(CONFIG_SENSORS_ULTRA45)	+= ultra45_env.o
>  obj-$(CONFIG_SENSORS_I5500)	+= i5500_temp.o
> diff --git a/drivers/hwmon/gxp-fan-ctrl.c b/drivers/hwmon/gxp-fan-ctrl.c
> new file mode 100644
> index 000000000000..a01530951d58
> --- /dev/null
> +++ b/drivers/hwmon/gxp-fan-ctrl.c
> @@ -0,0 +1,362 @@
> +// SPDX-License-Identifier: GPL-2.0=or-later
> +/* Copyright (C) 2022 Hewlett-Packard Enterprise Development Company, L.P. */
> +
> +#include <linux/err.h>
> +#include <linux/hwmon.h>
> +#include <linux/hwmon-sysfs.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/mfd/syscon.h>
> +
> +#define OFFSET_PWM0DUTY	0x10
> +#define OFFSET_PWM1DUTY	0x11
> +#define OFFSET_PWM2DUTY	0x12
> +#define OFFSET_PWM3DUTY	0x13
> +#define OFFSET_PWM4DUTY	0x14
> +#define OFFSET_PWM5DUTY	0x15
> +#define OFFSET_PWM6DUTY	0x16
> +#define OFFSET_PWM7DUTY	0x17

OFFSET_PWM[1-7]DUTY are not used anywhere. Please drop.

> +
> +struct fan_data {
> +	u32 inst;
> +	u32 fail;
> +	u32 id;
> +	u32 bit;
> +};
> +
> +struct fan_ctrl_data {
> +	struct fan_data fan[16];
> +	u32 power_bit;
> +};
> +
> +struct gxp_fan_ctrl_drvdata {
> +	struct device	*dev;
> +	struct device	*hwmon_dev;
> +	struct regmap	*plreg_map; /* Programmable logic register regmap */
> +	struct regmap	*fn2_map; /* Function 2 regmap */
> +	void __iomem	*base;
> +	const struct fan_ctrl_data *data;
> +	struct mutex update_lock; /* To protect the setting of the fan PWM value */
> +};
> +
> +static void address_translation(u32 desired_offset, u32 *offset, u32 *bit_shift)
> +{
> +	*offset = (desired_offset & 0xffc);
> +	*bit_shift = (desired_offset - *offset) * 8;
> +}
> +
> +static bool fan_installed(struct device *dev, int fan)
> +{
> +	struct gxp_fan_ctrl_drvdata *drvdata = dev_get_drvdata(dev);
> +	u32 trans_offset;
> +	u32 trans_shift;
> +	u32 val;
> +
> +	address_translation(drvdata->data->fan[fan].inst,
> +			    &trans_offset,
> +			    &trans_shift);
> +
> +	regmap_read(drvdata->plreg_map, trans_offset, &val);
> +	val = (val >> trans_shift) & drvdata->data->fan[fan].bit;
> +	if (val == drvdata->data->fan[fan].bit)
> +		return 1;
> +	else
> +		return 0;

	return val == drvdata->data->fan[fan].bit;

Those calculations look quite complex. Is there a public datasheet
that would enable me to understand how registers are actually assigned ?

> +}
> +
> +static bool fan_failed(struct device *dev, int fan)
> +{
> +	struct gxp_fan_ctrl_drvdata *drvdata = dev_get_drvdata(dev);
> +	u32 trans_offset;
> +	u32 trans_shift;
> +	u32 val;
> +
> +	address_translation(drvdata->data->fan[fan].fail,
> +			    &trans_offset,
> +			    &trans_shift);
> +
> +	regmap_read(drvdata->plreg_map, trans_offset, &val);
> +	val = (val >> trans_shift) & drvdata->data->fan[fan].fail;
> +	if (val == drvdata->data->fan[fan].fail)
> +		return 1;
> +	else
> +		return 0;

	return val == drvdata->data->fan[fan].fail;
> +}
> +
> +static ssize_t show_fault(struct device *dev, struct device_attribute *attr,
> +			  char *buf)
> +{
> +	int nr = (to_sensor_dev_attr(attr))->index;
> +	unsigned char val;
> +
> +	val = (fan_failed(dev, nr)) ? 1 : 0;

This is really unnecessary. bool translates to 1/0. There is no need
for another layer of translation.

> +
> +	return sprintf(buf, "%d\n", val);
> +}
> +
> +static ssize_t show_in(struct device *dev, struct device_attribute *attr,
> +		       char *buf)
> +{
> +	int nr = (to_sensor_dev_attr(attr))->index;
> +	struct gxp_fan_ctrl_drvdata *drvdata = dev_get_drvdata(dev);
> +	unsigned char val;
> +	unsigned int reg;
> +
> +	/* Check Power Status */
> +	regmap_read(drvdata->fn2_map, 0, &reg);
> +	if (reg & BIT(drvdata->data->power_bit)) {
> +		/* If Fan presents, then read it. */

is present

> +		val = (fan_installed(dev, nr)) ? readb(drvdata->base +
> +						       OFFSET_PWM0DUTY +
> +						       nr) : 0;

Various unnecessary ( ) throughout the code.

> +	} else {
> +		/* Power Off */
> +		val = 0;
> +	}

What determines power to a fan ? Should the power state be reported
with fanX_enable ? Or possibly the installed state ?

> +
> +	return sprintf(buf, "%d\n", val);
> +}
> +
> +static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
> +			char *buf)
> +{
> +	int nr = (to_sensor_dev_attr(attr))->index;
> +	struct gxp_fan_ctrl_drvdata *drvdata = dev_get_drvdata(dev);
> +	unsigned char val;
> +
> +	val = readb(drvdata->base + OFFSET_PWM0DUTY + nr);
> +
> +	return sprintf(buf, "%d\n", val);
> +}
> +
> +static ssize_t store_pwm(struct device *dev, struct device_attribute *attr,
> +			 const char *buf, size_t count)
> +{
> +	int nr = (to_sensor_dev_attr(attr))->index;
> +	struct gxp_fan_ctrl_drvdata *drvdata = dev_get_drvdata(dev);
> +	unsigned long val;
> +	int err;
> +
> +	err = kstrtoul(buf, 10, &val);
> +	if (err)
> +		return err;
> +
> +	if (val > 255)
> +		return -1; /* out of range */

Please always use standard error codes. This should be -EINVAL,
not -EPERM (-1).

> +
> +	mutex_lock(&drvdata->update_lock);
> +
> +	writeb(val, drvdata->base + OFFSET_PWM0DUTY + nr);
> +
> +	mutex_unlock(&drvdata->update_lock);

Mutex is pointless here.

> +	return count;
> +}
> +
> +static SENSOR_DEVICE_ATTR(pwm0, 0200 | 0444, show_pwm, store_pwm, 0);
> +static SENSOR_DEVICE_ATTR(pwm1, 0200 | 0444, show_pwm, store_pwm, 1);
> +static SENSOR_DEVICE_ATTR(pwm2, 0200 | 0444, show_pwm, store_pwm, 2);
> +static SENSOR_DEVICE_ATTR(pwm3, 0200 | 0444, show_pwm, store_pwm, 3);
> +static SENSOR_DEVICE_ATTR(pwm4, 0200 | 0444, show_pwm, store_pwm, 4);
> +static SENSOR_DEVICE_ATTR(pwm5, 0200 | 0444, show_pwm, store_pwm, 5);
> +static SENSOR_DEVICE_ATTR(pwm6, 0200 | 0444, show_pwm, store_pwm, 6);
> +static SENSOR_DEVICE_ATTR(pwm7, 0200 | 0444, show_pwm, store_pwm, 7);
> +static SENSOR_DEVICE_ATTR(pwm8, 0200 | 0444, show_pwm, store_pwm, 8);
> +static SENSOR_DEVICE_ATTR(pwm9, 0200 | 0444, show_pwm, store_pwm, 9);
> +static SENSOR_DEVICE_ATTR(pwm10, 0200 | 0444, show_pwm, store_pwm, 10);
> +static SENSOR_DEVICE_ATTR(pwm11, 0200 | 0444, show_pwm, store_pwm, 11);
> +static SENSOR_DEVICE_ATTR(pwm12, 0200 | 0444, show_pwm, store_pwm, 12);
> +static SENSOR_DEVICE_ATTR(pwm13, 0200 | 0444, show_pwm, store_pwm, 13);
> +static SENSOR_DEVICE_ATTR(pwm14, 0200 | 0444, show_pwm, store_pwm, 14);
> +static SENSOR_DEVICE_ATTR(pwm15, 0200 | 0444, show_pwm, store_pwm, 15);
> +
> +static struct sensor_device_attribute sda_in_input[] = {
> +	SENSOR_ATTR(fan0_input, 0444, show_in, NULL, 0),
> +	SENSOR_ATTR(fan1_input, 0444, show_in, NULL, 1),
> +	SENSOR_ATTR(fan2_input, 0444, show_in, NULL, 2),
> +	SENSOR_ATTR(fan3_input, 0444, show_in, NULL, 3),
> +	SENSOR_ATTR(fan4_input, 0444, show_in, NULL, 4),
> +	SENSOR_ATTR(fan5_input, 0444, show_in, NULL, 5),
> +	SENSOR_ATTR(fan6_input, 0444, show_in, NULL, 6),
> +	SENSOR_ATTR(fan7_input, 0444, show_in, NULL, 7),
> +	SENSOR_ATTR(fan8_input, 0444, show_in, NULL, 8),
> +	SENSOR_ATTR(fan9_input, 0444, show_in, NULL, 9),
> +	SENSOR_ATTR(fan10_input, 0444, show_in, NULL, 10),
> +	SENSOR_ATTR(fan11_input, 0444, show_in, NULL, 11),
> +	SENSOR_ATTR(fan12_input, 0444, show_in, NULL, 12),
> +	SENSOR_ATTR(fan13_input, 0444, show_in, NULL, 13),
> +	SENSOR_ATTR(fan14_input, 0444, show_in, NULL, 14),
> +	SENSOR_ATTR(fan15_input, 0444, show_in, NULL, 15),
> +};
> +
> +static SENSOR_DEVICE_ATTR(fan0_fault, 0444, show_fault, NULL, 0);
> +static SENSOR_DEVICE_ATTR(fan1_fault, 0444, show_fault, NULL, 1);
> +static SENSOR_DEVICE_ATTR(fan2_fault, 0444, show_fault, NULL, 2);
> +static SENSOR_DEVICE_ATTR(fan3_fault, 0444, show_fault, NULL, 3);
> +static SENSOR_DEVICE_ATTR(fan4_fault, 0444, show_fault, NULL, 4);
> +static SENSOR_DEVICE_ATTR(fan5_fault, 0444, show_fault, NULL, 5);
> +static SENSOR_DEVICE_ATTR(fan6_fault, 0444, show_fault, NULL, 6);
> +static SENSOR_DEVICE_ATTR(fan7_fault, 0444, show_fault, NULL, 7);
> +static SENSOR_DEVICE_ATTR(fan8_fault, 0444, show_fault, NULL, 8);
> +static SENSOR_DEVICE_ATTR(fan9_fault, 0444, show_fault, NULL, 9);
> +static SENSOR_DEVICE_ATTR(fan10_fault, 0444, show_fault, NULL, 10);
> +static SENSOR_DEVICE_ATTR(fan11_fault, 0444, show_fault, NULL, 11);
> +static SENSOR_DEVICE_ATTR(fan12_fault, 0444, show_fault, NULL, 12);
> +static SENSOR_DEVICE_ATTR(fan13_fault, 0444, show_fault, NULL, 13);
> +static SENSOR_DEVICE_ATTR(fan14_fault, 0444, show_fault, NULL, 14);
> +static SENSOR_DEVICE_ATTR(fan15_fault, 0444, show_fault, NULL, 15);
> +
> +static struct attribute *gxp_fan_ctrl_attrs[] = {
> +	&sensor_dev_attr_fan0_fault.dev_attr.attr,
> +	&sensor_dev_attr_fan1_fault.dev_attr.attr,
> +	&sensor_dev_attr_fan2_fault.dev_attr.attr,
> +	&sensor_dev_attr_fan3_fault.dev_attr.attr,
> +	&sensor_dev_attr_fan4_fault.dev_attr.attr,
> +	&sensor_dev_attr_fan5_fault.dev_attr.attr,
> +	&sensor_dev_attr_fan6_fault.dev_attr.attr,
> +	&sensor_dev_attr_fan7_fault.dev_attr.attr,
> +	&sensor_dev_attr_fan8_fault.dev_attr.attr,
> +	&sensor_dev_attr_fan9_fault.dev_attr.attr,
> +	&sensor_dev_attr_fan10_fault.dev_attr.attr,
> +	&sensor_dev_attr_fan11_fault.dev_attr.attr,
> +	&sensor_dev_attr_fan12_fault.dev_attr.attr,
> +	&sensor_dev_attr_fan13_fault.dev_attr.attr,
> +	&sensor_dev_attr_fan14_fault.dev_attr.attr,
> +	&sensor_dev_attr_fan15_fault.dev_attr.attr,
> +	&sda_in_input[0].dev_attr.attr,
> +	&sda_in_input[1].dev_attr.attr,
> +	&sda_in_input[2].dev_attr.attr,
> +	&sda_in_input[3].dev_attr.attr,
> +	&sda_in_input[4].dev_attr.attr,
> +	&sda_in_input[5].dev_attr.attr,
> +	&sda_in_input[6].dev_attr.attr,
> +	&sda_in_input[7].dev_attr.attr,
> +	&sda_in_input[8].dev_attr.attr,
> +	&sda_in_input[9].dev_attr.attr,
> +	&sda_in_input[10].dev_attr.attr,
> +	&sda_in_input[11].dev_attr.attr,
> +	&sda_in_input[12].dev_attr.attr,
> +	&sda_in_input[13].dev_attr.attr,
> +	&sda_in_input[14].dev_attr.attr,
> +	&sda_in_input[15].dev_attr.attr,
> +	&sensor_dev_attr_pwm0.dev_attr.attr,
> +	&sensor_dev_attr_pwm1.dev_attr.attr,
> +	&sensor_dev_attr_pwm2.dev_attr.attr,
> +	&sensor_dev_attr_pwm3.dev_attr.attr,
> +	&sensor_dev_attr_pwm4.dev_attr.attr,
> +	&sensor_dev_attr_pwm5.dev_attr.attr,
> +	&sensor_dev_attr_pwm6.dev_attr.attr,
> +	&sensor_dev_attr_pwm7.dev_attr.attr,
> +	&sensor_dev_attr_pwm8.dev_attr.attr,
> +	&sensor_dev_attr_pwm9.dev_attr.attr,
> +	&sensor_dev_attr_pwm10.dev_attr.attr,
> +	&sensor_dev_attr_pwm11.dev_attr.attr,
> +	&sensor_dev_attr_pwm12.dev_attr.attr,
> +	&sensor_dev_attr_pwm13.dev_attr.attr,
> +	&sensor_dev_attr_pwm14.dev_attr.attr,
> +	&sensor_dev_attr_pwm15.dev_attr.attr,
> +	NULL,
> +};
> +
> +ATTRIBUTE_GROUPS(gxp_fan_ctrl);
> +
> +static struct regmap *gxp_fan_ctrl_init_regmap(struct platform_device *pdev, char *reg_name)
> +{
> +	struct regmap_config regmap_config = {
> +		.reg_bits = 32,
> +		.reg_stride = 4,
> +		.val_bits = 32,
> +	};
> +	void __iomem *base;
> +
> +	base = devm_platform_ioremap_resource_byname(pdev, reg_name);
> +	if (IS_ERR(base))
> +		return ERR_CAST(base);
> +
> +	regmap_config.name = reg_name;
> +
> +	return devm_regmap_init_mmio(&pdev->dev, base, &regmap_config);
> +}
> +
> +static int gxp_fan_ctrl_probe(struct platform_device *pdev)
> +{
> +	struct gxp_fan_ctrl_drvdata *drvdata;
> +	struct resource *res;
> +	struct device *dev = &pdev->dev;
> +
> +	drvdata = devm_kzalloc(&pdev->dev, sizeof(struct gxp_fan_ctrl_drvdata),
> +			       GFP_KERNEL);
> +	if (!drvdata)
> +		return -ENOMEM;
> +
> +	drvdata->dev = &pdev->dev;
> +
> +	drvdata->data = of_device_get_match_data(&pdev->dev);
> +
> +	platform_set_drvdata(pdev, drvdata);
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	drvdata->base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(drvdata->base))
> +		return dev_err_probe(dev, PTR_ERR(drvdata->base),
> +				     "failed to map base\n");
> +	drvdata->plreg_map = gxp_fan_ctrl_init_regmap(pdev, "plreg");
> +	if (IS_ERR(drvdata->plreg_map))
> +		return dev_err_probe(dev, PTR_ERR(drvdata->plreg_map),
> +				     "failed to map plreg_handle\n");
> +
> +	drvdata->fn2_map = gxp_fan_ctrl_init_regmap(pdev, "fn2reg");
> +	if (IS_ERR(drvdata->fn2_map))
> +		return dev_err_probe(dev, PTR_ERR(drvdata->fn2_map),
> +				     "failed to map fn2_handle\n");
> +
> +	mutex_init(&drvdata->update_lock);
> +
> +	drvdata->hwmon_dev = devm_hwmon_device_register_with_groups(&pdev->dev,
> +								    "fan_ctrl",
> +								    drvdata,
> +								    gxp_fan_ctrl_groups);

New drivers must register with devm_hwmon_device_register_with_info().

> +
> +	return PTR_ERR_OR_ZERO(drvdata->hwmon_dev);
> +}
> +
> +static const struct fan_ctrl_data g10_data = {
> +	.fan[0] = { .inst = 0x00, .fail = 0x02, .id = 0x04, .bit = 0x01 },
> +	.fan[1] = { .inst = 0x00, .fail = 0x02, .id = 0x04, .bit = 0x02 },
> +	.fan[2] = { .inst = 0x00, .fail = 0x02, .id = 0x04, .bit = 0x04 },
> +	.fan[3] = { .inst = 0x00, .fail = 0x02, .id = 0x04, .bit = 0x08 },
> +	.fan[4] = { .inst = 0x00, .fail = 0x02, .id = 0x04, .bit = 0x10 },
> +	.fan[5] = { .inst = 0x00, .fail = 0x02, .id = 0x04, .bit = 0x20 },
> +	.fan[6] = { .inst = 0x00, .fail = 0x02, .id = 0x04, .bit = 0x40 },
> +	.fan[7] = { .inst = 0x00, .fail = 0x02, .id = 0x04, .bit = 0x80 },
> +	.fan[8] = { .inst = 0x01, .fail = 0x03, .id = 0x05, .bit = 0x01 },
> +	.fan[9] = { .inst = 0x01, .fail = 0x03, .id = 0x05, .bit = 0x02 },
> +	.fan[10] = { .inst = 0x01, .fail = 0x03, .id = 0x05, .bit = 0x04 },
> +	.fan[11] = { .inst = 0x01, .fail = 0x03, .id = 0x05, .bit = 0x08 },
> +	.fan[12] = { .inst = 0x01, .fail = 0x03, .id = 0x05, .bit = 0x10 },
> +	.fan[13] = { .inst = 0x01, .fail = 0x03, .id = 0x05, .bit = 0x20 },
> +	.fan[14] = { .inst = 0x01, .fail = 0x03, .id = 0x05, .bit = 0x40 },
> +	.fan[15] = { .inst = 0x01, .fail = 0x03, .id = 0x05, .bit = 0x80 },
> +	.power_bit = 24,
> +};
> +
> +static const struct of_device_id gxp_fan_ctrl_of_match[] = {
> +	{ .compatible = "hpe,gxp-fan-ctrl", .data = &g10_data },

I don't understand the point of attaching g10_data here.
Why not just access it directly ? There is just one table.

> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, gxp_fan_ctrl_of_match);
> +
> +static struct platform_driver gxp_fan_ctrl_driver = {
> +	.probe		= gxp_fan_ctrl_probe,
> +	.driver = {
> +		.name	= "gxp-fan-ctrl",
> +		.of_match_table = gxp_fan_ctrl_of_match,
> +	},
> +};
> +module_platform_driver(gxp_fan_ctrl_driver);
> +
> +MODULE_AUTHOR("Nick Hawkins <nick.hawkins@xxxxxxx>");
> +MODULE_DESCRIPTION("HPE GXP Fan Ctrl driver");
> +MODULE_LICENSE("GPL");
> -- 
> 2.17.1
> 



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux