Re: [PATCH] docs: hwmon: (smpro-hwmon) Improve grammar and formatting

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Nov 02, 2022 at 01:21:03PM +0700, Quan Nguyen wrote:
> Improve documentation grammar and formatting for the
> Ampere(R)'s Altra(R) SMpro hwmon driver.
> 
> Thanks Bagas for the changes in the link below.
> 
> Link: https://lore.kernel.org/lkml/Y1aHiaZ1OpHZIzS9@xxxxxxxxxx/T/#mfea2167b99384486a1b75d9304536015116c1821
> Signed-off-by: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
> ---
>  Documentation/hwmon/smpro-hwmon.rst | 111 ++++++++++++++--------------
>  1 file changed, 56 insertions(+), 55 deletions(-)
> 
> diff --git a/Documentation/hwmon/smpro-hwmon.rst b/Documentation/hwmon/smpro-hwmon.rst
> index 3a9b14dacf89..fb7b3665735b 100644
> --- a/Documentation/hwmon/smpro-hwmon.rst
> +++ b/Documentation/hwmon/smpro-hwmon.rst
> @@ -7,39 +7,39 @@ Supported chips:
>  
>    * Ampere(R) Altra(R)
>  
> -    Prefix: 'smpro'
> +    Prefix: ``smpro``
>  
> -    Reference: Altra SoC BMC Interface Specification
> +    Reference: `Altra SoC BMC Interface Specification`
>  
>  Author: Thu Nguyen <thu@xxxxxxxxxxxxxxxxxxxxxx>
>  
>  Description
>  -----------
> -This driver supports hardware monitoring for Ampere(R) Altra(R) SoC's based on the
> -SMpro co-processor (SMpro).
> -The following sensor types are supported by the driver:
> +The smpro-hwmon driver supports hardware monitoring for Ampere(R) Altra(R)
> +SoCs based on the SMpro co-processor (SMpro).  The following sensor metrics
> +are supported by the driver:
>  
>    * temperature
>    * voltage
>    * current
>    * power
>  
> -The SMpro interface provides the registers to query the various sensors and
> +The interface provides the registers to query the various sensors and
>  their values which are then exported to userspace by this driver.
>  
>  Usage Notes
>  -----------
>  
> -SMpro hwmon driver creates at least two sysfs files for each sensor.
> +The driver creates at least two sysfs files for each sensor.
>  
> -* File ``<sensor_type><idx>_label`` reports the sensor label.
> -* File ``<sensor_type><idx>_input`` returns the sensor value.
> +* ``<sensor_type><idx>_label`` reports the sensor label.
> +* ``<sensor_type><idx>_input`` returns the sensor value.
>  
> -The sysfs files are allocated in the SMpro root fs folder.
> -There is one root folder for each SMpro instance.
> +The sysfs files are allocated in the SMpro rootfs folder, with one root
> +directory for each instance.
>  
> -When the SoC is turned off, the driver will fail to read registers
> -and return -ENXIO.
> +When the SoC is turned off, the driver will fail to read registers and
> +return ``-ENXIO``.
>  
>  Sysfs entries
>  -------------
> @@ -48,48 +48,49 @@ The following sysfs files are supported:
>  
>  * Ampere(R) Altra(R):
>  
> -============    =============   ======  ===============================================
> -Name            Unit            Perm    Description
> -temp1_input     milli Celsius   RO      SoC temperature
> -temp2_input     milli Celsius   RO      Max temperature reported among SoC VRDs
> -temp2_crit      milli Celsius   RO      SoC VRD HOT Threshold temperature
> -temp3_input     milli Celsius   RO      Max temperature reported among DIMM VRDs
> -temp4_input     milli Celsius   RO      Max temperature reported among Core VRDs
> -temp5_input     milli Celsius   RO      Temperature of DIMM0 on CH0
> -temp5_crit      milli Celsius   RO      MEM HOT Threshold for all DIMMs
> -temp6_input     milli Celsius   RO      Temperature of DIMM0 on CH1
> -temp6_crit      milli Celsius   RO      MEM HOT Threshold for all DIMMs
> -temp7_input     milli Celsius   RO      Temperature of DIMM0 on CH2
> -temp7_crit      milli Celsius   RO      MEM HOT Threshold for all DIMMs
> -temp8_input     milli Celsius   RO      Temperature of DIMM0 on CH3
> -temp8_crit      milli Celsius   RO      MEM HOT Threshold for all DIMMs
> -temp9_input     milli Celsius   RO      Temperature of DIMM0 on CH4
> -temp9_crit      milli Celsius   RO      MEM HOT Threshold for all DIMMs
> -temp10_input    milli Celsius   RO      Temperature of DIMM0 on CH5
> -temp10_crit     milli Celsius   RO      MEM HOT Threshold for all DIMMs
> -temp11_input    milli Celsius   RO      Temperature of DIMM0 on CH6
> -temp11_crit     milli Celsius   RO      MEM HOT Threshold for all DIMMs
> -temp12_input    milli Celsius   RO      Temperature of DIMM0 on CH7
> -temp12_crit     milli Celsius   RO      MEM HOT Threshold for all DIMMs
> -temp13_input    milli Celsius   RO      Max temperature reported among RCA VRDs
> -in0_input       milli Volts     RO      Core voltage
> -in1_input       milli Volts     RO      SoC voltage
> -in2_input       milli Volts     RO      DIMM VRD1 voltage
> -in3_input       milli Volts     RO      DIMM VRD2 voltage
> -in4_input       milli Volts     RO      RCA VRD voltage
> -cur1_input      milli Amperes   RO      Core VRD current
> -cur2_input      milli Amperes   RO      SoC VRD current
> -cur3_input      milli Amperes   RO      DIMM VRD1 current
> -cur4_input      milli Amperes   RO      DIMM VRD2 current
> -cur5_input      milli Amperes   RO      RCA VRD current
> -power1_input    micro Watts     RO      Core VRD power
> -power2_input    micro Watts     RO      SoC VRD power
> -power3_input    micro Watts     RO      DIMM VRD1 power
> -power4_input    micro Watts     RO      DIMM VRD2 power
> -power5_input    micro Watts     RO      RCA VRD power
> -============    =============   ======  ===============================================
> -
> -Example::
> +  ============    =============  ======  ===============================================
> +  Name            Unit           Perm    Description
> +  ============    =============  ======  ===============================================
> +  temp1_input     millicelsius   RO      SoC temperature
> +  temp2_input     millicelsius   RO      Max temperature reported among SoC VRDs
> +  temp2_crit      millicelsius   RO      SoC VRD HOT Threshold temperature
> +  temp3_input     millicelsius   RO      Max temperature reported among DIMM VRDs
> +  temp4_input     millicelsius   RO      Max temperature reported among Core VRDs
> +  temp5_input     millicelsius   RO      Temperature of DIMM0 on CH0
> +  temp5_crit      millicelsius   RO      MEM HOT Threshold for all DIMMs
> +  temp6_input     millicelsius   RO      Temperature of DIMM0 on CH1
> +  temp6_crit      millicelsius   RO      MEM HOT Threshold for all DIMMs
> +  temp7_input     millicelsius   RO      Temperature of DIMM0 on CH2
> +  temp7_crit      millicelsius   RO      MEM HOT Threshold for all DIMMs
> +  temp8_input     millicelsius   RO      Temperature of DIMM0 on CH3
> +  temp8_crit      millicelsius   RO      MEM HOT Threshold for all DIMMs
> +  temp9_input     millicelsius   RO      Temperature of DIMM0 on CH4
> +  temp9_crit      millicelsius   RO      MEM HOT Threshold for all DIMMs
> +  temp10_input    millicelsius   RO      Temperature of DIMM0 on CH5
> +  temp10_crit     millicelsius   RO      MEM HOT Threshold for all DIMMs
> +  temp11_input    millicelsius   RO      Temperature of DIMM0 on CH6
> +  temp11_crit     millicelsius   RO      MEM HOT Threshold for all DIMMs
> +  temp12_input    millicelsius   RO      Temperature of DIMM0 on CH7
> +  temp12_crit     millicelsius   RO      MEM HOT Threshold for all DIMMs
> +  temp13_input    millicelsius   RO      Max temperature reported among RCA VRDs
> +  in0_input       millivolts     RO      Core voltage
> +  in1_input       millivolts     RO      SoC voltage
> +  in2_input       millivolts     RO      DIMM VRD1 voltage
> +  in3_input       millivolts     RO      DIMM VRD2 voltage
> +  in4_input       millivolts     RO      RCA VRD voltage
> +  cur1_input      milliamperes   RO      Core VRD current
> +  cur2_input      milliamperes   RO      SoC VRD current
> +  cur3_input      milliamperes   RO      DIMM VRD1 current
> +  cur4_input      milliamperes   RO      DIMM VRD2 current
> +  cur5_input      milliamperes   RO      RCA VRD current
> +  power1_input    microwatts     RO      Core VRD power
> +  power2_input    microwatts     RO      SoC VRD power
> +  power3_input    microwatts     RO      DIMM VRD1 power
> +  power4_input    microwatts     RO      DIMM VRD2 power
> +  power5_input    microwatts     RO      RCA VRD power
> +  ============    =============  ======  ===============================================
> +
> +  Example::
>  
>      # cat in0_input
>      830

LGTM, thanks for picking this up.

Reviewed-by: Bagas Sanjaya <bagasdotme@xxxxxxxxx>

-- 
An old man doll... just what I always wanted! - Clara

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux