From: Matt Porter <mporter@xxxxxx> The binding definition is based on the generic DMA request binding. Signed-off-by: Matt Porter <mporter@xxxxxx> Acked-by: Tony Lindgren <tony@xxxxxxxxxxx> Acked-by: Arnd Bergmann <arnd@xxxxxxxx> --- .../devicetree/bindings/mmc/ti-omap-hsmmc.txt | 26 +++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt index ed271fc..8c8908a 100644 --- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt @@ -20,8 +20,29 @@ ti,dual-volt: boolean, supports dual voltage cards ti,non-removable: non-removable slot (like eMMC) ti,needs-special-reset: Requires a special softreset sequence ti,needs-special-hs-handling: HSMMC IP needs special setting for handling High Speed +dmas: List of DMA specifiers with the controller specific format +as described in the generic DMA client binding. A tx and rx +specifier is required. +dma-names: List of DMA request names. These strings correspond +1:1 with the DMA specifiers listed in dmas. The string naming is +to be "rx" and "tx" for RX and TX DMA requests, respectively. + +Examples: + +[hwmod populated DMA resources] + + mmc1: mmc@0x4809c000 { + compatible = "ti,omap4-hsmmc"; + reg = <0x4809c000 0x400>; + ti,hwmods = "mmc1"; + ti,dual-volt; + bus-width = <4>; + vmmc-supply = <&vmmc>; /* phandle to regulator node */ + ti,non-removable; + }; + +[generic DMA request binding] -Example: mmc1: mmc@0x4809c000 { compatible = "ti,omap4-hsmmc"; reg = <0x4809c000 0x400>; @@ -30,4 +51,7 @@ Example: bus-width = <4>; vmmc-supply = <&vmmc>; /* phandle to regulator node */ ti,non-removable; + dmas = <&edma 24 + &edma 25>; + dma-names = "tx", "rx"; }; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html