Re: [PATCH 00/21] mm: introduce Designated Movable Blocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




So whatever we do, this should in general not be the kernel sole
decision to make this memory any special and let ZONE_MOVABLE manage it.
I believe you are stating that Designated Movable Blocks should only be
created as a result of special configuration (e.g. kernel parameters,
devicetree, ...). I would agree with that. Is that what you intended by
this statement, or am I missing something?

Essentially, that it should mostly be the decision of an educated admin.

...


only be located at the end of addressable memory then it will always be
located on MEMC1 of a 7278 system. This will create a tendency for user
space accesses to consume more bandwidth on the MEMC1 memory controller
and kernel space accesses to consume more bandwidth on MEMC0. A more
even distribution of ZONE_MOVABLE memory between the available memory
controllers in theory makes more memory bandwidth available to user
space intensive loads.


Sorry to be dense, is this also about different memory access latency or
just memory bandwidth?
Broadcom memory controllers do support configurable real-time scheduling
with bandwidth guarantees for different memory clients so I suppose this
is a fair question. However, the expectation here is that the CPUs would
have equivalent access latencies, so it is really just about memory
bandwidth for the CPUs.

Okay, thanks for clarifying.

...


Unfortunately, the historical monotonic layout of zones would
mean that if the lowest addressed memory controller contains
ZONE_MOVABLE memory then all of the memory available from
memory controllers at higher addresses must also be in the
ZONE_MOVABLE zone. This would force all kernel memory accesses
onto the lowest addressed memory controller and significantly
reduce the amount of memory available for non-movable
allocations.

We do have code that relies on zones during boot to not overlap within a
single node.
I believe my changes address all such reliance, but if you are aware of
something I missed please let me know.


One example I'm aware of is drivers/base/memory.c:memory_block_add_nid()
/ early_node_zone_for_memory_block().

If we get it wrong, or actually have memory blocks that span multiple
zones, we can no longer offline these memory blocks. We really wanted to
avoid scanning the memmap for now and it seems to get the job done in
environments we care about.
To the extent that this implementation only supports creating Designated
Movable Blocks in boot memory and boot memory does not generally support
offlining, I wouldn't expect this to be an issue. However, if for some

Sad truth is, that boot memory sometimes is supposed to support offlining -- or people expect it to work to some degree. For example, with special memblock hacks you can get them into ZONE_MOVABLE to be able to hotunplug some NUMA nodes even after a reboot (movable_node kernel parameter).

There are use cases where you want to offline boot memory to save energy by disabling complete memory banks -- best effort when not using ZONE_MOVABLE.

Having that said, I agree that it's a corner case use case.

reason offlining boot memory becomes desirable then we should use
dmb_intersects() along with zone_intersects() to take the appropriate
action. Based on the current usage of zone_intersects() I'm not entirely
sure what the correct action should be.




The main objective of this patch set is therefore to allow a
block of memory to be designated as part of the ZONE_MOVABLE
zone where it will always only be used by the kernel page
allocator to satisfy requests for movable pages. The term
Designated Movable Block is introduced here to represent such a
block. The favored implementation allows modification of the

Sorry to say, but that term is rather suboptimal to describe what you
are doing here. You simply have some system RAM you'd want to have
managed by ZONE_MOVABLE, no?
That may be true, but I found it superior to the 'sticky' movable
terminology put forth by Mel Gorman ;). I'm happy to entertain
alternatives, but they may not be as easy to find as you think.

Especially the "blocks" part is confusing. Movable pageblocks? Movable
Linux memory blocks?

Note that the sticky movable *pageblocks* were a completely different
concept than simply reusing ZONE_MOVABLE for some memory ranges.
I would say that is open for debate. The implementations would be
"completely different" but the objectives could be quite similar.
There appear to be a number of people that are interested in the concept
of memory that can only contain data that tolerates relocation for
various potentially non-competing reasons.

Fundamentally, the concept of MIGRATE_MOVABLE memory is useful to allow
competing user space processes to share limited physical memory supplied
by the kernel. The data in that memory can be relocated elsewhere by the
kernel when the process that owns it is not executing. This movement is
typically not observable to the owning process which has its own address
space.

The kernel uses MIGRATE_UNMOVABLE memory to protect the integrity of its
address space, but of course what the kernel considers unmovable could
in fact be moved by a hypervisor in a way that is analogous to what the
kernel does for user space.

For maximum flexibility the Linux memory management allows for
converting the migratetype of free memory to help satisfy requests to
allocate pages of memory through a mechanism I will call "fallback". The
concepts of sticky movable pageblocks and ZONE_MOVABLE have the common
objective of preventing the migratetype of pageblocks from getting
converted to anything other than MIGRATE_MOVABLE, and this is what makes
the memory special.

Yes, good summary.


I agree with Mel Gorman that zones are meant to be about address induced
limitations, so using a zone for the purpose of breaking the fallback
mechanism of the page allocator is a misuse of the concept. A new
migratetype would be more appropriate for representing this change in
how fallback should apply to the pageblock because the desired behavior
has nothing to do with the address at which the memory is located. It is
entirely reasonable to desire "sticky" movable behavior for memory in
any zone. Such a solution would be directly applicable to our multiple
memory controller use case, and is really how Designated Movable Blocks
should be imagined.

I usually agree with Mel, but not necessarily on that point that it's a misuse of a concept. It's an extension of an existing concept, that doesn't imply it's a misuse. Traditionally, it was about address limitations, yes. Now it's also about allocation types. Sure, there might be other ways to get it done as well.

I'd compare it to the current use of NUMA nodes: traditionally, it really used to be actual NUMA nodes. Nowadays, it's a mechanism, for example, to expose performance-differented memory, let applications use it via mbind() or have the page allocator dynamically migrate hot/cold pages back and forth according to memory tiering strategies.


However, I also recognize the efficiency benefits of using a
ZONE_MOVABLE zone to manage the pages that have this "sticky" movable
behavior. Introducing a new sticky MIGRATE_MOVABLE migratetype adds a
new free_list to every free_area which increases the search space and
associated work when trying to allocate a page for all callers.
Introducing ZONE_MOVABLE reduces the search space by providing an early
separation between searches for movable and non-movable allocations. The
classic zone restrictions weren't a good fit for multiple memory
controllers, but those restrictions were lifted to overcome similar
issues with memory_hotplug. It is not that Designated Movable Blocks
want to be in ZONE_MOVABLE, but rather that ZONE_MOVABLE provides a
convenience for managing the page allocators use of "sticky" movable
memory just like it does for memory hotplug. Dumping the memory in
Designated Movable Blocks into the ZONE_MOVABLE zone allows an existing
mechanism to be reused, reducing the risk of negatively impacting the
page allocator behavior.

There are some subtle distinctions between Designated Movable Blocks and
the existing ZONE_MOVABLE zone. Because Designated Movable Blocks are
reserved when created they are protected against any early boot time
kernel reservations that might place unmovable allocations in them. The
implementation continues to track the zone_movable_pfn as the start of
the "classic" ZONE_MOVABLE zone on each node. A Designated Movable Block
can overlap any other zone including the "classic" ZONE_MOVABLE zone.

What exactly to you mean with "overlay" -- I assume you mean that zone span will overlay but it really "belongs" to ZONE_MOVABLE, as indicated by it's struct page metadata.


Doing it the DAX/CXL way would be to expose these memory ranges as
daxdev instead, and letting the admin decide how to online these memory
ranges when adding them to the buddy via the dax/kmem kernel module.

That could mean that your booting with memory on MC0 only, and expose
memory of MC1 via a daxdev, giving the admin the possibility do decide
to which zone the memory should be onlined too.

That would avoid most kernel code changes.
I wasn't familiar with these kernel mechanisms and did enjoy reading
about the somewhat oxymoronic "volatile-use of persistent memory" that
is dax/kmem, but this isn't performance differentiated RAM. It really is
just System RAM so this degree of complexity seems unwarranted.

It's an existing mechanism that will get heavily used by CXL -- for all kinds of memory. I feel like it could solve your use case eventually.

Excluded memory cannot be allocated by the early allocator and you can online it to ZONE_MOVABLE. It at least seems to roughly do something you want to achieve. I'd be curious what you can't achieve or what we might need to make



Why do we have to start using ZONE_MOVABLE for them?
One of the "other opportunities" for Designated Movable Blocks is to
allow CMA to allocate from a DMB as an alternative. This would allow
current users to continue using CMA as they want, but would allow users
(e.g. hugetlb_cma) that are not sensitive to the allocation latency to
let the kernel page allocator make more complete use (i.e. waste less)
of the shared memory. ZONE_MOVABLE pageblocks are always MIGRATE_MOVABLE
so the restrictions placed on MIGRATE_CMA pageblocks are lifted within a
DMB.

The whole purpose of ZONE_MOVABLE is that *no* unmovable allocations end
up on it. The biggest difference to CMA is that the CMA *owner* is able
to place unmovable allocations on it.
I'm not sure that is a wholly fair characterization (or maybe I just
hope that's the case :). I would agree that the Linux page allocator
can't place any unmovable allocations on it. I expect that people locate
memory in ZONE_MOVABLE for different purposes. For example, the memory
hotplug users ostensibly place memory their so that any data on the hot
plugged memory can be moved off of the memory prior to it being hot
unplugged. Unplugging the memory removes the memory from the
ZONE_MOVABLE zone, but it is not materially different from allocating
the memory for a different purpose (perhaps in a different machine).

Well, memory offlining is the one operation that evacuates memory) and makes sure it cannot be allocated anymore (possibly with the intention of removing that memory from the system). Sure, you can call it a fake allocation, but there is a more fundamental difference compared to random subsystems placing unmovable allocations there.


Conceptually, allowing a CMA allocator to operate on a Designated
Movable Block of memory that it *owns* is also removing that memory from
the ZONE_MOVABLE zone. Issues of ownership should be addressed which is
why these "other opportunities" are being deferred for now, but I do not
believe such use is unreasonable. Again, Designated Movable Blocks are
only allowed in boot memory so there shouldn't be a conflict with memory
hotplug. I believe the same would apply for hugetlb_cma.

Using ZONE_MOVABLE for unmovable allocations (hugetlb_cma) is not
acceptable as is.

Using ZONE_MOVABLE in different context and calling it DMB is very
confusing TBH.
Perhaps it is more helpful to think of a Designated Movable Block as a
block of memory whose migratetype is not allowed to be changed from
MIGRATE_MOVABLE (i.e. "sticky" migrate movable). The fact that

I think that such a description might make the feature easier to grasp. Although I am not sure yet if DMB as proposed is rather a hack to avoid introducing real sticky movable blocks (sorry, I'm just trying to connect the dots and there is a lot of complexity involved) or actually a clean design. Messing with zones and memblock always implies complexity :)

ZONE_MOVABLE is being used to achieve that is an implementation detail
for this commit set. In the same way that memory hotplug is the concept
of adding System RAM during run time, but placing it in ZONE_MOVABLE is
an implementation detail to make it easier to unplug.

Right, but there we don't play any tricks: it's just ZONE_MOVABLE without any other metadata pointing out ownership. Maybe that's what you are trying to describe here: A DMB inside ZONE_MOVABLE implies that there is another owner and that even memory offlining should fail.



Just a note that I described the idea of a "PREFER_MOVABLE" zone in the
past. In contrast to ZONE_MOVABLE, we cannot run into weird OOM
situations in a ZONE misconfiguration, and we'd end up placing only
movable allocations on it as long as we can. However, especially
gigantic pages could be allocated from it. It sounds kind-of more like
what you want -- and maybe in combination of daxctl to let the user
decide how to online memory ranges.
Best not let Mel hear you suggesting another zone;).

He most probably read it already. ;) I can understand all theoretical complains about ZONE_MOVABLE, but in the end it has been getting the job done for years.




And just to make it clear again: depending on ZONE_MOVABLE == only user
space allocations is not future proof.
Understood.

May I ask what the main purpose/use case of DMB is?

Would it be sufficient, to specify that hugetlb are allocated from a specific memory area, possible managed by CMA? And then simply providing the application that cares these hugetlb pages? Would you need something that is *not* hugetlb?

But even then, how would an application be able to specify that exactly it's allocation will get served from that part of ZONE_MOVABLE? Sure, if you don't reserve any other hugetlb pages, it's easy.


I'd like to note that if you'd go with (fake) NUMA nodes like PMEM or CXL you could easily let your application mbind() to that memory and have it configured.

--
Thanks,

David / dhildenb




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux