Re: [PATCH 01/21] mm/page_isolation: protect cma from isolate_single_pageblock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 9/13/2022 6:53 PM, Zi Yan wrote:
On 13 Sep 2022, at 21:47, Doug Berger wrote:

On 9/13/2022 6:09 PM, Zi Yan wrote:
On 13 Sep 2022, at 20:59, Doug Berger wrote:

On 9/13/2022 5:02 PM, Zi Yan wrote:
On 13 Sep 2022, at 15:54, Doug Berger wrote:

The function set_migratetype_isolate() has special handling for
pageblocks of MIGRATE_CMA type that protects them from being
isolated for MIGRATE_MOVABLE requests.

Since isolate_single_pageblock() doesn't receive the migratetype
argument of start_isolate_page_range() it used the migratetype
of the pageblock instead of the requested migratetype which
defeats this MIGRATE_CMA check.

This allows an attempt to create a gigantic page within a CMA
region to change the migratetype of the first and last pageblocks
from MIGRATE_CMA to MIGRATE_MOVABLE when they are restored after
failure, which corrupts the CMA region.

The calls to (un)set_migratetype_isolate() for the first and last
pageblocks of the start_isolate_page_range() are moved back into
that function to allow access to its migratetype argument and make
it easier to see how all of the pageblocks in the range are
isolated.

Fixes: b2c9e2fbba32 ("mm: make alloc_contig_range work at pageblock granularity")
Signed-off-by: Doug Berger <opendmb@xxxxxxxxx>
---
    mm/page_isolation.c | 75 +++++++++++++++++++++------------------------
    1 file changed, 35 insertions(+), 40 deletions(-)

Thanks for the fix.
Thanks for the review.


Why not just pass migratetype into isolate_single_pageblock() and use
it when set_migratetype_isolate() is used? That would have much
fewer changes. What is the reason of pulling skip isolation logic out?
I found the skip_isolation logic confusing and thought that setting and restoring the migratetype within the same function and consolidating the error recovery paths also within that function was easier to understand and less prone to accidental breakage.

In particular, setting MIGRATE_ISOLATE in isolate_single_pageblock() and having to remember to unset it in start_isolate_page_range() differently on different error paths was troublesome for me.

Wouldn't this work as well?

diff --git a/mm/page_isolation.c b/mm/page_isolation.c
index c1307d1bea81..a312cabd0d95 100644
--- a/mm/page_isolation.c
+++ b/mm/page_isolation.c
@@ -288,6 +288,7 @@ __first_valid_page(unsigned long pfn, unsigned long nr_pages)
    * @isolate_before:    isolate the pageblock before the boundary_pfn
    * @skip_isolation:    the flag to skip the pageblock isolation in second
    *                     isolate_single_pageblock()
+ * @migratetype:       Migrate type to set in error recovery.
    *
    * Free and in-use pages can be as big as MAX_ORDER and contain more than one
    * pageblock. When not all pageblocks within a page are isolated at the same
@@ -302,9 +303,9 @@ __first_valid_page(unsigned long pfn, unsigned long nr_pages)
    * the in-use page then splitting the free page.
    */
   static int isolate_single_pageblock(unsigned long boundary_pfn, int flags,
-                       gfp_t gfp_flags, bool isolate_before, bool skip_isolation)
+                       gfp_t gfp_flags, bool isolate_before, bool skip_isolation,
+                       int migratetype)
   {
-       unsigned char saved_mt;
          unsigned long start_pfn;
          unsigned long isolate_pageblock;
          unsigned long pfn;
@@ -328,12 +329,10 @@ static int isolate_single_pageblock(unsigned long boundary_pfn, int flags,
          start_pfn  = max(ALIGN_DOWN(isolate_pageblock, MAX_ORDER_NR_PAGES),
                                        zone->zone_start_pfn);

-       saved_mt = get_pageblock_migratetype(pfn_to_page(isolate_pageblock));
-
          if (skip_isolation)
-               VM_BUG_ON(!is_migrate_isolate(saved_mt));
+               VM_BUG_ON(!is_migrate_isolate(get_pageblock_migratetype(pfn_to_page(isolate_pageblock))));
          else {
-               ret = set_migratetype_isolate(pfn_to_page(isolate_pageblock), saved_mt, flags,
+               ret = set_migratetype_isolate(pfn_to_page(isolate_pageblock), migratetype, flags,
                                  isolate_pageblock, isolate_pageblock + pageblock_nr_pages);

                  if (ret)
@@ -475,7 +474,7 @@ static int isolate_single_pageblock(unsigned long boundary_pfn, int flags,
   failed:
          /* restore the original migratetype */
          if (!skip_isolation)
-               unset_migratetype_isolate(pfn_to_page(isolate_pageblock), saved_mt);
+               unset_migratetype_isolate(pfn_to_page(isolate_pageblock), migratetype);
          return -EBUSY;
   }

@@ -537,7 +536,8 @@ int start_isolate_page_range(unsigned long start_pfn, unsigned long end_pfn,
          bool skip_isolation = false;

          /* isolate [isolate_start, isolate_start + pageblock_nr_pages) pageblock */
-       ret = isolate_single_pageblock(isolate_start, flags, gfp_flags, false, skip_isolation);
+       ret = isolate_single_pageblock(isolate_start, flags, gfp_flags, false,
+                               skip_isolation, migratetype);
          if (ret)
                  return ret;

@@ -545,7 +545,8 @@ int start_isolate_page_range(unsigned long start_pfn, unsigned long end_pfn,
                  skip_isolation = true;

          /* isolate [isolate_end - pageblock_nr_pages, isolate_end) pageblock */
-       ret = isolate_single_pageblock(isolate_end, flags, gfp_flags, true, skip_isolation);
+       ret = isolate_single_pageblock(isolate_end, flags, gfp_flags, true,
+                               skip_isolation, migratetype);
          if (ret) {
                  unset_migratetype_isolate(pfn_to_page(isolate_start), migratetype);
                  return ret;

I would expect this to work as well, but it is not my preference.


It could certainly be done differently, but this was my preference.

A smaller patch can make review easier, right?
It certainly can. Especially when it is for code that you are familiar with ;).

I am happy to have you submit a patch to fix this issue and submit it to stable for backporting. Fixing the issue is what's important to me.


I can submit the above as a patch. Is there a visible userspace issue, so that we need to
backport it? Thanks.
I did not observe symptoms of the issue, but I did observe the issue when allocating gigantic huge pages as part of the hugetlbfs on a system with CMA regions.

My best guess is that it probably does not create a "functional" problem since the error would likely be cancelled out by subsequent CMA allocations restoring the pageblock migratetype. However, in the meantime the page allocator would handle free pages in those pageblocks without the MIGRATE_CMA qualifications which might impact driver performance. There might be other problems of which I am unaware.

The issue currently only exists in the wild in v5.19, so it would be nice to get it backported there to nip it in the bud.




Ultimately, I would like to make MIGRATE_ISOLATE a separate bit,
so that migratetype will not be overwritten during page isolation.
Then, set_migratetype_isolate() and start_isolate_page_range()
will not have migratetype to set in error recovery any more.
That is on my TODO.


diff --git a/mm/page_isolation.c b/mm/page_isolation.c
index 9d73dc38e3d7..8e16aa22cb61 100644
--- a/mm/page_isolation.c
+++ b/mm/page_isolation.c
@@ -286,8 +286,6 @@ __first_valid_page(unsigned long pfn, unsigned long nr_pages)
     * @flags:			isolation flags
     * @gfp_flags:			GFP flags used for migrating pages
     * @isolate_before:	isolate the pageblock before the boundary_pfn
- * @skip_isolation:	the flag to skip the pageblock isolation in second
- *			isolate_single_pageblock()
     *
     * Free and in-use pages can be as big as MAX_ORDER-1 and contain more than one
     * pageblock. When not all pageblocks within a page are isolated at the same
@@ -302,9 +300,8 @@ __first_valid_page(unsigned long pfn, unsigned long nr_pages)
     * the in-use page then splitting the free page.
     */
    static int isolate_single_pageblock(unsigned long boundary_pfn, int flags,
-			gfp_t gfp_flags, bool isolate_before, bool skip_isolation)
+			gfp_t gfp_flags, bool isolate_before)
    {
-	unsigned char saved_mt;
    	unsigned long start_pfn;
    	unsigned long isolate_pageblock;
    	unsigned long pfn;
@@ -328,18 +325,6 @@ static int isolate_single_pageblock(unsigned long boundary_pfn, int flags,
    	start_pfn  = max(ALIGN_DOWN(isolate_pageblock, MAX_ORDER_NR_PAGES),
    				      zone->zone_start_pfn);

-	saved_mt = get_pageblock_migratetype(pfn_to_page(isolate_pageblock));
-
-	if (skip_isolation)
-		VM_BUG_ON(!is_migrate_isolate(saved_mt));
-	else {
-		ret = set_migratetype_isolate(pfn_to_page(isolate_pageblock), saved_mt, flags,
-				isolate_pageblock, isolate_pageblock + pageblock_nr_pages);
-
-		if (ret)
-			return ret;
-	}
-
    	/*
    	 * Bail out early when the to-be-isolated pageblock does not form
    	 * a free or in-use page across boundary_pfn:
@@ -428,7 +413,7 @@ static int isolate_single_pageblock(unsigned long boundary_pfn, int flags,
    					ret = set_migratetype_isolate(page, page_mt,
    						flags, head_pfn, head_pfn + nr_pages);
    					if (ret)
-						goto failed;
+						return ret;
    				}

    				ret = __alloc_contig_migrate_range(&cc, head_pfn,
@@ -443,7 +428,7 @@ static int isolate_single_pageblock(unsigned long boundary_pfn, int flags,
    					unset_migratetype_isolate(page, page_mt);

    				if (ret)
-					goto failed;
+					return -EBUSY;
    				/*
    				 * reset pfn to the head of the free page, so
    				 * that the free page handling code above can split
@@ -459,24 +444,19 @@ static int isolate_single_pageblock(unsigned long boundary_pfn, int flags,
    				while (!PageBuddy(pfn_to_page(outer_pfn))) {
    					/* stop if we cannot find the free page */
    					if (++order >= MAX_ORDER)
-						goto failed;
+						return -EBUSY;
    					outer_pfn &= ~0UL << order;
    				}
    				pfn = outer_pfn;
    				continue;
    			} else
    #endif
-				goto failed;
+				return -EBUSY;
    		}

    		pfn++;
    	}
    	return 0;
-failed:
-	/* restore the original migratetype */
-	if (!skip_isolation)
-		unset_migratetype_isolate(pfn_to_page(isolate_pageblock), saved_mt);
-	return -EBUSY;
    }

    /**
@@ -534,21 +514,30 @@ int start_isolate_page_range(unsigned long start_pfn, unsigned long end_pfn,
    	unsigned long isolate_start = ALIGN_DOWN(start_pfn, pageblock_nr_pages);
    	unsigned long isolate_end = ALIGN(end_pfn, pageblock_nr_pages);
    	int ret;
-	bool skip_isolation = false;

    	/* isolate [isolate_start, isolate_start + pageblock_nr_pages) pageblock */
-	ret = isolate_single_pageblock(isolate_start, flags, gfp_flags, false, skip_isolation);
+	ret = set_migratetype_isolate(pfn_to_page(isolate_start), migratetype,
+			flags, isolate_start, isolate_start + pageblock_nr_pages);
    	if (ret)
    		return ret;
-
-	if (isolate_start == isolate_end - pageblock_nr_pages)
-		skip_isolation = true;
+	ret = isolate_single_pageblock(isolate_start, flags, gfp_flags, false);
+	if (ret)
+		goto unset_start_block;

    	/* isolate [isolate_end - pageblock_nr_pages, isolate_end) pageblock */
-	ret = isolate_single_pageblock(isolate_end, flags, gfp_flags, true, skip_isolation);
+	pfn = isolate_end - pageblock_nr_pages;
+	if (isolate_start != pfn) {
+		ret = set_migratetype_isolate(pfn_to_page(pfn), migratetype,
+				flags, pfn, pfn + pageblock_nr_pages);
+		if (ret)
+			goto unset_start_block;
+	}
+	ret = isolate_single_pageblock(isolate_end, flags, gfp_flags, true);
    	if (ret) {
-		unset_migratetype_isolate(pfn_to_page(isolate_start), migratetype);
-		return ret;
+		if (isolate_start != pfn)
+			goto unset_end_block;
+		else
+			goto unset_start_block;
    	}

    	/* skip isolated pageblocks at the beginning and end */
@@ -557,15 +546,21 @@ int start_isolate_page_range(unsigned long start_pfn, unsigned long end_pfn,
    	     pfn += pageblock_nr_pages) {
    		page = __first_valid_page(pfn, pageblock_nr_pages);
    		if (page && set_migratetype_isolate(page, migratetype, flags,
-					start_pfn, end_pfn)) {
-			undo_isolate_page_range(isolate_start, pfn, migratetype);
-			unset_migratetype_isolate(
-				pfn_to_page(isolate_end - pageblock_nr_pages),
-				migratetype);
-			return -EBUSY;
-		}
+					start_pfn, end_pfn))
+			goto unset_isolated_blocks;
    	}
    	return 0;
+
+unset_isolated_blocks:
+	ret = -EBUSY;
+	undo_isolate_page_range(isolate_start + pageblock_nr_pages, pfn,
+				migratetype);
+unset_end_block:
+	unset_migratetype_isolate(pfn_to_page(isolate_end - pageblock_nr_pages),
+				  migratetype);
+unset_start_block:
+	unset_migratetype_isolate(pfn_to_page(isolate_start), migratetype);
+	return ret;
    }

    /*
--
2.25.1


--
Best Regards,
Yan, Zi


--
Best Regards,
Yan, Zi
Thanks for your efforts to get alloc_contig_range to work at pageblock granularity!
-Doug


--
Best Regards,
Yan, Zi
Thanks,
-Doug



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux