Addition of the M and N recommended values for the USB3 PHY DPLL.
Sysclk for DRA7xx is 20MHz.
This yields:
Clk = 20MHz * M/(N+1) = 20MHz * 1000 /(7+1) = 2.5 Ghz
Signed-off-by: Nikhil Devshatwar <nikhil.nd@xxxxxx>
Signed-off-by: Ruchika Kharwar <ruchika@xxxxxx>
---
drivers/usb/phy/phy-omap-usb3.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/phy/phy-omap-usb3.c b/drivers/usb/phy/phy-omap-usb3.c
index a6e60b1..a2fb30b 100644
--- a/drivers/usb/phy/phy-omap-usb3.c
+++ b/drivers/usb/phy/phy-omap-usb3.c
@@ -27,7 +27,7 @@
#include <linux/delay.h>
#include <linux/usb/omap_control_usb.h>
-#define NUM_SYS_CLKS 5
+#define NUM_SYS_CLKS 6
#define PLL_STATUS 0x00000004
#define PLL_GO 0x00000008
#define PLL_CONFIGURATION1 0x0000000C
@@ -62,6 +62,7 @@ enum sys_clk_rate {
CLK_RATE_12MHZ,
CLK_RATE_16MHZ,
CLK_RATE_19MHZ,
+ CLK_RATE_20MHZ,
CLK_RATE_26MHZ,
CLK_RATE_38MHZ
};
@@ -70,8 +71,10 @@ static struct usb_dpll_params omap_usb3_dpll_params[NUM_SYS_CLKS] = {
{1250, 5, 4, 20, 0}, /* 12 MHz */
{3125, 20, 4, 20, 0}, /* 16.8 MHz */
{1172, 8, 4, 20, 65537}, /* 19.2 MHz */
+ {1000, 7, 4, 10, 0}, /* 20 MHz */
{1250, 12, 4, 20, 0}, /* 26 MHz */
{3125, 47, 4, 20, 92843}, /* 38.4 MHz */
+
};
static int omap_usb3_suspend(struct usb_phy *x, int suspend)
@@ -122,6 +125,8 @@ static inline enum sys_clk_rate __get_sys_clk_index(unsigned long rate)
return CLK_RATE_16MHZ;
case 19200000:
return CLK_RATE_19MHZ;
+ case 20000000:
+ return CLK_RATE_20MHZ;
case 26000000:
return CLK_RATE_26MHZ;
case 38400000:
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
