From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
"as usual" does not mean much here, especially as these are introductory
sections and 10-bit addressing hasn't been introduced yet.
Signed-off-by: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
---
Documentation/i2c/i2c-protocol.rst | 2 +-
Documentation/i2c/smbus-protocol.rst | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/i2c/i2c-protocol.rst b/Documentation/i2c/i2c-protocol.rst
index 9ecf03f5de33..7ffada1f3335 100644
--- a/Documentation/i2c/i2c-protocol.rst
+++ b/Documentation/i2c/i2c-protocol.rst
@@ -13,7 +13,7 @@ S Start condition
P Stop condition
Rd/Wr (1 bit) Read/Write bit. Rd equals 1, Wr equals 0.
A, NA (1 bit) Acknowledge (ACK) and Not Acknowledge (NACK) bit
-Addr (7 bits) I2C 7 bit address. Note that this can be expanded as usual to
+Addr (7 bits) I2C 7 bit address. Note that this can be expanded to
get a 10 bit I2C address.
Comm (8 bits) Command byte, a data byte which often selects a register on
the device.
diff --git a/Documentation/i2c/smbus-protocol.rst b/Documentation/i2c/smbus-protocol.rst
index 00d8e17d0aca..55e209c7e520 100644
--- a/Documentation/i2c/smbus-protocol.rst
+++ b/Documentation/i2c/smbus-protocol.rst
@@ -41,7 +41,7 @@ Sr Repeated start condition, used to switch from write to
P Stop condition
Rd/Wr (1 bit) Read/Write bit. Rd equals 1, Wr equals 0.
A, NA (1 bit) Acknowledge (ACK) and Not Acknowledge (NACK) bit
-Addr (7 bits) I2C 7 bit address. Note that this can be expanded as usual to
+Addr (7 bits) I2C 7 bit address. Note that this can be expanded to
get a 10 bit I2C address.
Comm (8 bits) Command byte, a data byte which often selects a register on
the device.
--
2.34.1
