This patch adds low level debug uart support to stixxxx based SOCs.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxx>
CC: Arnd Bergmann <arnd@xxxxxxxx>
---
arch/arm/Kconfig.debug | 38 +++++++++++++++++++++++
arch/arm/include/debug/stixxxx.S | 61 ++++++++++++++++++++++++++++++++++++++
arch/arm/mach-stixxxx/board-dt.c | 2 +
3 files changed, 101 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/include/debug/stixxxx.S
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 1d41908..cc98ef3 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -483,6 +483,16 @@ choice
This option selects UART0 on VIA/Wondermedia System-on-a-chip
devices, including VT8500, WM8505, WM8650 and WM8850.
+ config DEBUG_STIXXXX_UART
+ depends on ARCH_STIXXXX
+ bool "Use StiH415/416 ASC for low-level debug"
+ help
+ Say Y here if you want kernel low-level debugging support
+ on StiH415/416 based platforms like B2000, B2020.
+ It support UART2 and SBC_UART1.
+
+ If unsure, say N.
+
config DEBUG_LL_UART_NONE
bool "No low-level debugging UART"
depends on !ARCH_MULTIPLATFORM
@@ -617,6 +627,33 @@ choice
endchoice
+choice
+ prompt "Low-level debug console UART"
+ depends on DEBUG_LL && DEBUG_STIXXXX_UART
+
+ config STIH41X_DEBUG_ASC2
+ bool "ASC2 UART"
+ help
+ Say Y here if you want kernel low-level debugging support
+ on STiH415/416 based platforms like b2000, which has
+ default UART wired up to ASC2.
+
+ If unsure, say N.
+
+ config STIH41X_DEBUG_SBC_ASC1
+ bool "SBC ASC1 UART"
+ help
+ Say Y here if you want kernel low-level debugging support
+ on STiH415/416 based platforms like b2020. which has
+ default UART wired up to SBC ASC1.
+
+ If unsure, say N.
+
+endchoice
+
+
+
+
config DEBUG_LL_INCLUDE
string
default "debug/bcm2835.S" if DEBUG_BCM2835
@@ -641,6 +678,7 @@ config DEBUG_LL_INCLUDE
DEBUG_MMP_UART3
default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
+ default "debug/stixxxx.S" if DEBUG_STIXXXX_UART
default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1
default "debug/tegra.S" if DEBUG_TEGRA_UART
default "debug/ux500.S" if DEBUG_UX500_UART
diff --git a/arch/arm/include/debug/stixxxx.S b/arch/arm/include/debug/stixxxx.S
new file mode 100644
index 0000000..7bc02a7
--- /dev/null
+++ b/arch/arm/include/debug/stixxxx.S
@@ -0,0 +1,61 @@
+/*
+ * arch/arm/include/debug/stixxxx.S
+ *
+ * Debugging macro include header
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define STIH41X_COMMS_BASE 0xfed00000
+#define STIH41X_ASC2_BASE (STIH41X_COMMS_BASE+0x32000)
+
+#define STIH41X_SBC_LPM_BASE 0xfe400000
+#define STIH41X_SBC_COMMS_BASE (STIH41X_SBC_LPM_BASE + 0x100000)
+#define STIH41X_SBC_ASC1_BASE (STIH41X_SBC_COMMS_BASE + 0x31000)
+
+
+#define VIRT_ADDRESS(x) (x - 0x1000000)
+
+#if IS_ENABLED(CONFIG_STIH41X_DEBUG_ASC2)
+#define DEBUG_LL_UART_BASE STIH41X_ASC2_BASE
+#endif
+
+#if IS_ENABLED(CONFIG_STIH41X_DEBUG_SBC_ASC1)
+#define DEBUG_LL_UART_BASE STIH41X_SBC_ASC1_BASE
+#endif
+
+#ifndef DEBUG_LL_UART_BASE
+#error "DEBUG UART is not Configured"
+#endif
+
+#define ASC_TX_BUF_OFF 0x04
+#define ASC_CTRL_OFF 0x0c
+#define ASC_STA_OFF 0x14
+
+#define ASC_STA_TX_FULL (1<<9)
+#define ASC_STA_TX_EMPTY (1<<1)
+
+
+ .macro addruart, rp, rv, tmp
+ ldr \rp, =DEBUG_LL_UART_BASE @ physical base
+ ldr \rv, =VIRT_ADDRESS(DEBUG_LL_UART_BASE) @ virt base
+ .endm
+
+ .macro senduart,rd,rx
+ strb \rd, [\rx, #ASC_TX_BUF_OFF]
+ .endm
+
+ .macro waituart,rd,rx
+1001: ldr \rd, [\rx, #ASC_STA_OFF]
+ tst \rd, #ASC_STA_TX_FULL
+ bne 1001b
+ .endm
+
+ .macro busyuart,rd,rx
+1001: ldr \rd, [\rx, #ASC_STA_OFF]
+ tst \rd, #ASC_STA_TX_EMPTY
+ beq 1001b
+ .endm
diff --git a/arch/arm/mach-stixxxx/board-dt.c b/arch/arm/mach-stixxxx/board-dt.c
index 6487a12..2c4e427 100644
--- a/arch/arm/mach-stixxxx/board-dt.c
+++ b/arch/arm/mach-stixxxx/board-dt.c
@@ -11,6 +11,7 @@
#include <linux/clocksource.h>
#include <linux/irq.h>
#include <asm/hardware/cache-l2x0.h>
+#include <asm/mach/map.h>
#include <asm/mach/arch.h>
#include "smp.h"
@@ -42,6 +43,7 @@ static const char *stih41x_dt_match[] __initdata = {
};
DT_MACHINE_START(STM, "STiH415/416 SoC with Flattened Device Tree")
+ .map_io = debug_ll_io_init,
.init_time = stih41x_timer_init,
.smp = smp_ops(stixxxx_smp_ops),
.dt_compat = stih41x_dt_match,
--
1.7.6.5
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
