On Wed, Jul 20, 2022 at 09:20:16AM +0200, Eugene Shalygin wrote:
> This driver utilises a WMI interface found in AMD 500 series ASUS boards,
> to read EC registers. But it turned out that ASUS abandoned the
> interface, as it disappeared from Intel 600 series boards. Additionally,
> the WMI interface was incredibly slow. Therefore this driver was deprecated
> in favor of the asus_ec_sensors driver, which supports more boards, more
> sensors, and is faster.
>
> Signed-off-by: Eugene Shalygin <eugene.shalygin@xxxxxxxxx>
I'll apply this patch after the next commit window closes (it should rest
in -next for a full cycle to give people a chance to provide feedback).
Thanks,
Guenter
> ---
> Documentation/hwmon/asus_wmi_ec_sensors.rst | 38 --
> Documentation/hwmon/index.rst | 1 -
> MAINTAINERS | 7 -
> drivers/hwmon/Kconfig | 15 -
> drivers/hwmon/Makefile | 1 -
> drivers/hwmon/asus_wmi_ec_sensors.c | 622 --------------------
> 6 files changed, 684 deletions(-)
> delete mode 100644 Documentation/hwmon/asus_wmi_ec_sensors.rst
> delete mode 100644 drivers/hwmon/asus_wmi_ec_sensors.c
>
> diff --git a/Documentation/hwmon/asus_wmi_ec_sensors.rst b/Documentation/hwmon/asus_wmi_ec_sensors.rst
> deleted file mode 100644
> index 1b287f229e86..000000000000
> --- a/Documentation/hwmon/asus_wmi_ec_sensors.rst
> +++ /dev/null
> @@ -1,38 +0,0 @@
> -.. SPDX-License-Identifier: GPL-2.0-or-later
> -
> -Kernel driver asus_wmi_ec_sensors
> -=================================
> -
> -Supported boards:
> - * PRIME X570-PRO,
> - * Pro WS X570-ACE,
> - * ROG CROSSHAIR VIII DARK HERO,
> - * ROG CROSSHAIR VIII FORMULA,
> - * ROG CROSSHAIR VIII HERO,
> - * ROG STRIX B550-E GAMING,
> - * ROG STRIX B550-I GAMING,
> - * ROG STRIX X570-E GAMING.
> -
> -Authors:
> - - Eugene Shalygin <eugene.shalygin@xxxxxxxxx>
> -
> -Description:
> -------------
> -ASUS mainboards publish hardware monitoring information via Super I/O
> -chip and the ACPI embedded controller (EC) registers. Some of the sensors
> -are only available via the EC.
> -
> -ASUS WMI interface provides a method (BREC) to read data from EC registers,
> -which is utilized by this driver to publish those sensor readings to the
> -HWMON system. The driver is aware of and reads the following sensors:
> -
> -1. Chipset (PCH) temperature
> -2. CPU package temperature
> -3. Motherboard temperature
> -4. Readings from the T_Sensor header
> -5. VRM temperature
> -6. CPU_Opt fan RPM
> -7. Chipset fan RPM
> -8. Readings from the "Water flow meter" header (RPM)
> -9. Readings from the "Water In" and "Water Out" temperature headers
> -10. CPU current
> diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
> index f7113b0f8b2a..98fa687b361e 100644
> --- a/Documentation/hwmon/index.rst
> +++ b/Documentation/hwmon/index.rst
> @@ -44,7 +44,6 @@ Hardware Monitoring Kernel Drivers
> asc7621
> aspeed-pwm-tacho
> asus_ec_sensors
> - asus_wmi_ec_sensors
> asus_wmi_sensors
> bcm54140
> bel-pfe
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 66bffb24a348..71272cbc7c99 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -3162,13 +3162,6 @@ L: linux-hwmon@xxxxxxxxxxxxxxx
> S: Maintained
> F: drivers/hwmon/asus_wmi_sensors.c
>
> -ASUS WMI EC HARDWARE MONITOR DRIVER
> -M: Eugene Shalygin <eugene.shalygin@xxxxxxxxx>
> -M: Denis Pauk <pauk.denis@xxxxxxxxx>
> -L: linux-hwmon@xxxxxxxxxxxxxxx
> -S: Maintained
> -F: drivers/hwmon/asus_wmi_ec_sensors.c
> -
> ASUS EC HARDWARE MONITOR DRIVER
> M: Eugene Shalygin <eugene.shalygin@xxxxxxxxx>
> L: linux-hwmon@xxxxxxxxxxxxxxx
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index fd2446cf343b..7b26baa9146f 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -2341,21 +2341,6 @@ config SENSORS_ASUS_WMI
> This driver can also be built as a module. If so, the module
> will be called asus_wmi_sensors.
>
> -config SENSORS_ASUS_WMI_EC
> - tristate "ASUS WMI B550/X570"
> - depends on ACPI_WMI && SENSORS_ASUS_EC=n
> - help
> - If you say yes here you get support for the ACPI embedded controller
> - hardware monitoring interface found in B550/X570 ASUS motherboards.
> - This driver will provide readings of fans, voltages and temperatures
> - through the system firmware.
> -
> - This driver is deprecated in favor of the ASUS EC Sensors driver
> - which provides fully compatible output.
> -
> - This driver can also be built as a module. If so, the module
> - will be called asus_wmi_sensors_ec.
> -
> config SENSORS_ASUS_EC
> tristate "ASUS EC Sensors"
> depends on X86
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index 007e829d1d0d..f62c5c36b276 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -11,7 +11,6 @@ obj-$(CONFIG_SENSORS_ACPI_POWER) += acpi_power_meter.o
> obj-$(CONFIG_SENSORS_ATK0110) += asus_atk0110.o
> obj-$(CONFIG_SENSORS_ASUS_EC) += asus-ec-sensors.o
> obj-$(CONFIG_SENSORS_ASUS_WMI) += asus_wmi_sensors.o
> -obj-$(CONFIG_SENSORS_ASUS_WMI_EC) += asus_wmi_ec_sensors.o
>
> # Native drivers
> # asb100, then w83781d go first, as they can override other drivers' addresses.
> diff --git a/drivers/hwmon/asus_wmi_ec_sensors.c b/drivers/hwmon/asus_wmi_ec_sensors.c
> deleted file mode 100644
> index a3a2f014dec0..000000000000
> --- a/drivers/hwmon/asus_wmi_ec_sensors.c
> +++ /dev/null
> @@ -1,622 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-or-later
> -/*
> - * HWMON driver for ASUS B550/X570 motherboards that publish sensor
> - * values via the embedded controller registers.
> - *
> - * Copyright (C) 2021 Eugene Shalygin <eugene.shalygin@xxxxxxxxx>
> - * Copyright (C) 2018-2019 Ed Brindley <kernel@xxxxxxxxxxxxx>
> - *
> - * EC provides:
> - * - Chipset temperature
> - * - CPU temperature
> - * - Motherboard temperature
> - * - T_Sensor temperature
> - * - VRM temperature
> - * - Water In temperature
> - * - Water Out temperature
> - * - CPU Optional Fan RPM
> - * - Chipset Fan RPM
> - * - Water Flow Fan RPM
> - * - CPU current
> - */
> -
> -#include <linux/acpi.h>
> -#include <linux/dmi.h>
> -#include <linux/hwmon.h>
> -#include <linux/init.h>
> -#include <linux/jiffies.h>
> -#include <linux/kernel.h>
> -#include <linux/module.h>
> -#include <linux/mutex.h>
> -#include <linux/nls.h>
> -#include <linux/units.h>
> -#include <linux/wmi.h>
> -
> -#include <asm/unaligned.h>
> -
> -#define ASUSWMI_MONITORING_GUID "466747A0-70EC-11DE-8A39-0800200C9A66"
> -#define ASUSWMI_METHODID_BLOCK_READ_EC 0x42524543 /* BREC */
> -/* From the ASUS DSDT source */
> -#define ASUSWMI_BREC_REGISTERS_MAX 16
> -#define ASUSWMI_MAX_BUF_LEN 128
> -#define SENSOR_LABEL_LEN 16
> -
> -static u32 hwmon_attributes[hwmon_max] = {
> - [hwmon_chip] = HWMON_C_REGISTER_TZ,
> - [hwmon_temp] = HWMON_T_INPUT | HWMON_T_LABEL,
> - [hwmon_in] = HWMON_I_INPUT | HWMON_I_LABEL,
> - [hwmon_curr] = HWMON_C_INPUT | HWMON_C_LABEL,
> - [hwmon_fan] = HWMON_F_INPUT | HWMON_F_LABEL,
> -};
> -
> -struct asus_wmi_ec_sensor_address {
> - u8 index;
> - u8 bank;
> - u8 size;
> -};
> -
> -#define MAKE_SENSOR_ADDRESS(size_i, bank_i, index_i) { \
> - .size = size_i, \
> - .bank = bank_i, \
> - .index = index_i, \
> -}
> -
> -struct ec_sensor_info {
> - struct asus_wmi_ec_sensor_address addr;
> - char label[SENSOR_LABEL_LEN];
> - enum hwmon_sensor_types type;
> -};
> -
> -#define EC_SENSOR(sensor_label, sensor_type, size, bank, index) { \
> - .addr = MAKE_SENSOR_ADDRESS(size, bank, index), \
> - .label = sensor_label, \
> - .type = sensor_type, \
> -}
> -
> -enum known_ec_sensor {
> - SENSOR_TEMP_CHIPSET,
> - SENSOR_TEMP_CPU,
> - SENSOR_TEMP_MB,
> - SENSOR_TEMP_T_SENSOR,
> - SENSOR_TEMP_VRM,
> - SENSOR_FAN_CPU_OPT,
> - SENSOR_FAN_CHIPSET,
> - SENSOR_FAN_VRM_HS,
> - SENSOR_FAN_WATER_FLOW,
> - SENSOR_CURR_CPU,
> - SENSOR_TEMP_WATER_IN,
> - SENSOR_TEMP_WATER_OUT,
> - SENSOR_MAX
> -};
> -
> -/* All known sensors for ASUS EC controllers */
> -static const struct ec_sensor_info known_ec_sensors[] = {
> - [SENSOR_TEMP_CHIPSET] = EC_SENSOR("Chipset", hwmon_temp, 1, 0x00, 0x3a),
> - [SENSOR_TEMP_CPU] = EC_SENSOR("CPU", hwmon_temp, 1, 0x00, 0x3b),
> - [SENSOR_TEMP_MB] = EC_SENSOR("Motherboard", hwmon_temp, 1, 0x00, 0x3c),
> - [SENSOR_TEMP_T_SENSOR] = EC_SENSOR("T_Sensor", hwmon_temp, 1, 0x00, 0x3d),
> - [SENSOR_TEMP_VRM] = EC_SENSOR("VRM", hwmon_temp, 1, 0x00, 0x3e),
> - [SENSOR_FAN_CPU_OPT] = EC_SENSOR("CPU_Opt", hwmon_fan, 2, 0x00, 0xb0),
> - [SENSOR_FAN_VRM_HS] = EC_SENSOR("VRM HS", hwmon_fan, 2, 0x00, 0xb2),
> - [SENSOR_FAN_CHIPSET] = EC_SENSOR("Chipset", hwmon_fan, 2, 0x00, 0xb4),
> - [SENSOR_FAN_WATER_FLOW] = EC_SENSOR("Water_Flow", hwmon_fan, 2, 0x00, 0xbc),
> - [SENSOR_CURR_CPU] = EC_SENSOR("CPU", hwmon_curr, 1, 0x00, 0xf4),
> - [SENSOR_TEMP_WATER_IN] = EC_SENSOR("Water_In", hwmon_temp, 1, 0x01, 0x00),
> - [SENSOR_TEMP_WATER_OUT] = EC_SENSOR("Water_Out", hwmon_temp, 1, 0x01, 0x01),
> -};
> -
> -struct asus_wmi_data {
> - const enum known_ec_sensor known_board_sensors[SENSOR_MAX + 1];
> -};
> -
> -/* boards with EC support */
> -static struct asus_wmi_data sensors_board_PW_X570_P = {
> - .known_board_sensors = {
> - SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB,
> - SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM,
> - SENSOR_FAN_CHIPSET,
> - SENSOR_MAX
> - },
> -};
> -
> -static struct asus_wmi_data sensors_board_PW_X570_A = {
> - .known_board_sensors = {
> - SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB, SENSOR_TEMP_VRM,
> - SENSOR_FAN_CHIPSET,
> - SENSOR_CURR_CPU,
> - SENSOR_MAX
> - },
> -};
> -
> -static struct asus_wmi_data sensors_board_R_C8H = {
> - .known_board_sensors = {
> - SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB,
> - SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM,
> - SENSOR_TEMP_WATER_IN, SENSOR_TEMP_WATER_OUT,
> - SENSOR_FAN_CPU_OPT, SENSOR_FAN_CHIPSET, SENSOR_FAN_WATER_FLOW,
> - SENSOR_CURR_CPU,
> - SENSOR_MAX
> - },
> -};
> -
> -/* Same as Hero but without chipset fan */
> -static struct asus_wmi_data sensors_board_R_C8DH = {
> - .known_board_sensors = {
> - SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB,
> - SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM,
> - SENSOR_TEMP_WATER_IN, SENSOR_TEMP_WATER_OUT,
> - SENSOR_FAN_CPU_OPT, SENSOR_FAN_WATER_FLOW,
> - SENSOR_CURR_CPU,
> - SENSOR_MAX
> - },
> -};
> -
> -/* Same as Hero but without water */
> -static struct asus_wmi_data sensors_board_R_C8F = {
> - .known_board_sensors = {
> - SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB,
> - SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM,
> - SENSOR_FAN_CPU_OPT, SENSOR_FAN_CHIPSET,
> - SENSOR_CURR_CPU,
> - SENSOR_MAX
> - },
> -};
> -
> -static struct asus_wmi_data sensors_board_RS_B550_E_G = {
> - .known_board_sensors = {
> - SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB,
> - SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM,
> - SENSOR_FAN_CPU_OPT,
> - SENSOR_MAX
> - },
> -};
> -
> -static struct asus_wmi_data sensors_board_RS_B550_I_G = {
> - .known_board_sensors = {
> - SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB,
> - SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM,
> - SENSOR_FAN_VRM_HS,
> - SENSOR_CURR_CPU,
> - SENSOR_MAX
> - },
> -};
> -
> -static struct asus_wmi_data sensors_board_RS_X570_E_G = {
> - .known_board_sensors = {
> - SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB,
> - SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM,
> - SENSOR_FAN_CHIPSET,
> - SENSOR_CURR_CPU,
> - SENSOR_MAX
> - },
> -};
> -
> -#define DMI_EXACT_MATCH_ASUS_BOARD_NAME(name, sensors) { \
> - .matches = { \
> - DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "ASUSTeK COMPUTER INC."), \
> - DMI_EXACT_MATCH(DMI_BOARD_NAME, name), \
> - }, \
> - .driver_data = sensors, \
> -}
> -
> -static const struct dmi_system_id asus_wmi_ec_dmi_table[] = {
> - DMI_EXACT_MATCH_ASUS_BOARD_NAME("PRIME X570-PRO", &sensors_board_PW_X570_P),
> - DMI_EXACT_MATCH_ASUS_BOARD_NAME("Pro WS X570-ACE", &sensors_board_PW_X570_A),
> - DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG CROSSHAIR VIII DARK HERO", &sensors_board_R_C8DH),
> - DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG CROSSHAIR VIII FORMULA", &sensors_board_R_C8F),
> - DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG CROSSHAIR VIII HERO", &sensors_board_R_C8H),
> - DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG STRIX B550-E GAMING", &sensors_board_RS_B550_E_G),
> - DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG STRIX B550-I GAMING", &sensors_board_RS_B550_I_G),
> - DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG STRIX X570-E GAMING", &sensors_board_RS_X570_E_G),
> - {}
> -};
> -MODULE_DEVICE_TABLE(dmi, asus_wmi_ec_dmi_table);
> -
> -struct ec_sensor {
> - enum known_ec_sensor info_index;
> - long cached_value;
> -};
> -
> -/**
> - * struct asus_wmi_ec_info - sensor info.
> - * @sensors: list of sensors.
> - * @read_arg: UTF-16LE string to pass to BRxx() WMI function.
> - * @read_buffer: decoded output from WMI result.
> - * @nr_sensors: number of board EC sensors.
> - * @nr_registers: number of EC registers to read (sensor might span more than 1 register).
> - * @last_updated: in jiffies.
> - */
> -struct asus_wmi_ec_info {
> - struct ec_sensor sensors[SENSOR_MAX];
> - char read_arg[(ASUSWMI_BREC_REGISTERS_MAX * 4 + 1) * 2];
> - u8 read_buffer[ASUSWMI_BREC_REGISTERS_MAX];
> - unsigned int nr_sensors;
> - unsigned int nr_registers;
> - unsigned long last_updated;
> -};
> -
> -struct asus_wmi_sensors {
> - struct asus_wmi_ec_info ec;
> - /* lock access to internal cache */
> - struct mutex lock;
> -};
> -
> -static int asus_wmi_ec_fill_board_sensors(struct asus_wmi_ec_info *ec,
> - const enum known_ec_sensor *bsi)
> -{
> - struct ec_sensor *s = ec->sensors;
> - int i;
> -
> - ec->nr_sensors = 0;
> - ec->nr_registers = 0;
> -
> - for (i = 0; bsi[i] != SENSOR_MAX; i++) {
> - s[i].info_index = bsi[i];
> - ec->nr_sensors++;
> - ec->nr_registers += known_ec_sensors[bsi[i]].addr.size;
> - }
> -
> - return 0;
> -}
> -
> -/*
> - * The next four functions convert to or from BRxx string argument format.
> - * The format of the string is as follows:
> - * - The string consists of two-byte UTF-16LE characters.
> - * - The value of the very first byte in the string is equal to the total
> - * length of the next string in bytes, thus excluding the first two-byte
> - * character.
> - * - The rest of the string encodes the pairs of (bank, index) pairs, where
> - * both values are byte-long (0x00 to 0xFF).
> - * - Numbers are encoded as UTF-16LE hex values.
> - */
> -static int asus_wmi_ec_decode_reply_buffer(const u8 *in, u32 length, u8 *out)
> -{
> - char buffer[ASUSWMI_MAX_BUF_LEN * 2];
> - u32 len = min_t(u32, get_unaligned_le16(in), length - 2);
> -
> - utf16s_to_utf8s((wchar_t *)(in + 2), len / 2, UTF16_LITTLE_ENDIAN, buffer, sizeof(buffer));
> -
> - return hex2bin(out, buffer, len / 4);
> -}
> -
> -static void asus_wmi_ec_encode_registers(const u8 *in, u32 len, char *out)
> -{
> - char buffer[ASUSWMI_MAX_BUF_LEN * 2];
> -
> - bin2hex(buffer, in, len);
> -
> - utf8s_to_utf16s(buffer, len * 2, UTF16_LITTLE_ENDIAN, (wchar_t *)(out + 2), len * 2);
> -
> - put_unaligned_le16(len * 4, out);
> -}
> -
> -static void asus_wmi_ec_make_block_read_query(struct asus_wmi_ec_info *ec)
> -{
> - u8 registers[ASUSWMI_BREC_REGISTERS_MAX * 2];
> - const struct ec_sensor_info *si;
> - int i, j, offset;
> -
> - offset = 0;
> - for (i = 0; i < ec->nr_sensors; i++) {
> - si = &known_ec_sensors[ec->sensors[i].info_index];
> - for (j = 0; j < si->addr.size; j++) {
> - registers[offset++] = si->addr.bank;
> - registers[offset++] = si->addr.index + j;
> - }
> - }
> -
> - asus_wmi_ec_encode_registers(registers, offset, ec->read_arg);
> -}
> -
> -static int asus_wmi_ec_block_read(u32 method_id, char *query, u8 *out)
> -{
> - struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
> - struct acpi_buffer input;
> - union acpi_object *obj;
> - acpi_status status;
> - int ret;
> -
> - /* The first byte of the BRxx() argument string has to be the string size. */
> - input.length = query[0] + 2;
> - input.pointer = query;
> - status = wmi_evaluate_method(ASUSWMI_MONITORING_GUID, 0, method_id, &input, &output);
> - if (ACPI_FAILURE(status))
> - return -EIO;
> -
> - obj = output.pointer;
> - if (!obj)
> - return -EIO;
> -
> - if (obj->type != ACPI_TYPE_BUFFER || obj->buffer.length < 2) {
> - ret = -EIO;
> - goto out_free_obj;
> - }
> -
> - ret = asus_wmi_ec_decode_reply_buffer(obj->buffer.pointer, obj->buffer.length, out);
> -
> -out_free_obj:
> - ACPI_FREE(obj);
> - return ret;
> -}
> -
> -static inline long get_sensor_value(const struct ec_sensor_info *si, u8 *data)
> -{
> - switch (si->addr.size) {
> - case 1:
> - return *data;
> - case 2:
> - return get_unaligned_be16(data);
> - case 4:
> - return get_unaligned_be32(data);
> - default:
> - return 0;
> - }
> -}
> -
> -static void asus_wmi_ec_update_ec_sensors(struct asus_wmi_ec_info *ec)
> -{
> - const struct ec_sensor_info *si;
> - struct ec_sensor *s;
> - u8 i_sensor;
> - u8 *data;
> -
> - data = ec->read_buffer;
> - for (i_sensor = 0; i_sensor < ec->nr_sensors; i_sensor++) {
> - s = &ec->sensors[i_sensor];
> - si = &known_ec_sensors[s->info_index];
> - s->cached_value = get_sensor_value(si, data);
> - data += si->addr.size;
> - }
> -}
> -
> -static long asus_wmi_ec_scale_sensor_value(long value, int data_type)
> -{
> - switch (data_type) {
> - case hwmon_curr:
> - case hwmon_temp:
> - case hwmon_in:
> - return value * MILLI;
> - default:
> - return value;
> - }
> -}
> -
> -static int asus_wmi_ec_find_sensor_index(const struct asus_wmi_ec_info *ec,
> - enum hwmon_sensor_types type, int channel)
> -{
> - int i;
> -
> - for (i = 0; i < ec->nr_sensors; i++) {
> - if (known_ec_sensors[ec->sensors[i].info_index].type == type) {
> - if (channel == 0)
> - return i;
> -
> - channel--;
> - }
> - }
> - return -EINVAL;
> -}
> -
> -static int asus_wmi_ec_get_cached_value_or_update(struct asus_wmi_sensors *sensor_data,
> - int sensor_index,
> - long *value)
> -{
> - struct asus_wmi_ec_info *ec = &sensor_data->ec;
> - int ret = 0;
> -
> - mutex_lock(&sensor_data->lock);
> -
> - if (time_after(jiffies, ec->last_updated + HZ)) {
> - ret = asus_wmi_ec_block_read(ASUSWMI_METHODID_BLOCK_READ_EC,
> - ec->read_arg, ec->read_buffer);
> - if (ret)
> - goto unlock;
> -
> - asus_wmi_ec_update_ec_sensors(ec);
> - ec->last_updated = jiffies;
> - }
> -
> - *value = ec->sensors[sensor_index].cached_value;
> -
> -unlock:
> - mutex_unlock(&sensor_data->lock);
> -
> - return ret;
> -}
> -
> -/* Now follow the functions that implement the hwmon interface */
> -
> -static int asus_wmi_ec_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
> - u32 attr, int channel, long *val)
> -{
> - struct asus_wmi_sensors *sensor_data = dev_get_drvdata(dev);
> - struct asus_wmi_ec_info *ec = &sensor_data->ec;
> - int ret, sidx, info_index;
> - long value = 0;
> -
> - sidx = asus_wmi_ec_find_sensor_index(ec, type, channel);
> - if (sidx < 0)
> - return sidx;
> -
> - ret = asus_wmi_ec_get_cached_value_or_update(sensor_data, sidx, &value);
> - if (ret)
> - return ret;
> -
> - info_index = ec->sensors[sidx].info_index;
> - *val = asus_wmi_ec_scale_sensor_value(value, known_ec_sensors[info_index].type);
> -
> - return ret;
> -}
> -
> -static int asus_wmi_ec_hwmon_read_string(struct device *dev,
> - enum hwmon_sensor_types type, u32 attr,
> - int channel, const char **str)
> -{
> - struct asus_wmi_sensors *sensor_data = dev_get_drvdata(dev);
> - struct asus_wmi_ec_info *ec = &sensor_data->ec;
> - int sensor_index;
> -
> - sensor_index = asus_wmi_ec_find_sensor_index(ec, type, channel);
> - *str = known_ec_sensors[ec->sensors[sensor_index].info_index].label;
> -
> - return 0;
> -}
> -
> -static umode_t asus_wmi_ec_hwmon_is_visible(const void *drvdata,
> - enum hwmon_sensor_types type, u32 attr,
> - int channel)
> -{
> - const struct asus_wmi_sensors *sensor_data = drvdata;
> - const struct asus_wmi_ec_info *ec = &sensor_data->ec;
> - int index;
> -
> - index = asus_wmi_ec_find_sensor_index(ec, type, channel);
> -
> - return index < 0 ? 0 : 0444;
> -}
> -
> -static int asus_wmi_hwmon_add_chan_info(struct hwmon_channel_info *asus_wmi_hwmon_chan,
> - struct device *dev, int num,
> - enum hwmon_sensor_types type, u32 config)
> -{
> - u32 *cfg;
> -
> - cfg = devm_kcalloc(dev, num + 1, sizeof(*cfg), GFP_KERNEL);
> - if (!cfg)
> - return -ENOMEM;
> -
> - asus_wmi_hwmon_chan->type = type;
> - asus_wmi_hwmon_chan->config = cfg;
> - memset32(cfg, config, num);
> -
> - return 0;
> -}
> -
> -static const struct hwmon_ops asus_wmi_ec_hwmon_ops = {
> - .is_visible = asus_wmi_ec_hwmon_is_visible,
> - .read = asus_wmi_ec_hwmon_read,
> - .read_string = asus_wmi_ec_hwmon_read_string,
> -};
> -
> -static struct hwmon_chip_info asus_wmi_ec_chip_info = {
> - .ops = &asus_wmi_ec_hwmon_ops,
> -};
> -
> -static int asus_wmi_ec_configure_sensor_setup(struct device *dev,
> - const enum known_ec_sensor *bsi)
> -{
> - struct asus_wmi_sensors *sensor_data = dev_get_drvdata(dev);
> - struct asus_wmi_ec_info *ec = &sensor_data->ec;
> - struct hwmon_channel_info *asus_wmi_hwmon_chan;
> - const struct hwmon_channel_info **asus_wmi_ci;
> - int nr_count[hwmon_max] = {}, nr_types = 0;
> - const struct hwmon_chip_info *chip_info;
> - const struct ec_sensor_info *si;
> - enum hwmon_sensor_types type;
> - struct device *hwdev;
> - int i, ret;
> -
> - ret = asus_wmi_ec_fill_board_sensors(ec, bsi);
> - if (ret)
> - return ret;
> -
> - if (!sensor_data->ec.nr_sensors)
> - return -ENODEV;
> -
> - for (i = 0; i < ec->nr_sensors; i++) {
> - si = &known_ec_sensors[ec->sensors[i].info_index];
> - if (!nr_count[si->type])
> - nr_types++;
> - nr_count[si->type]++;
> - }
> -
> - if (nr_count[hwmon_temp]) {
> - nr_count[hwmon_chip]++;
> - nr_types++;
> - }
> -
> - /*
> - * If we can get values for all the registers in a single query,
> - * the query will not change from call to call.
> - */
> - asus_wmi_ec_make_block_read_query(ec);
> -
> - asus_wmi_hwmon_chan = devm_kcalloc(dev, nr_types, sizeof(*asus_wmi_hwmon_chan),
> - GFP_KERNEL);
> - if (!asus_wmi_hwmon_chan)
> - return -ENOMEM;
> -
> - asus_wmi_ci = devm_kcalloc(dev, nr_types + 1, sizeof(*asus_wmi_ci), GFP_KERNEL);
> - if (!asus_wmi_ci)
> - return -ENOMEM;
> -
> - asus_wmi_ec_chip_info.info = asus_wmi_ci;
> - chip_info = &asus_wmi_ec_chip_info;
> -
> - for (type = 0; type < hwmon_max; type++) {
> - if (!nr_count[type])
> - continue;
> -
> - ret = asus_wmi_hwmon_add_chan_info(asus_wmi_hwmon_chan, dev,
> - nr_count[type], type,
> - hwmon_attributes[type]);
> - if (ret)
> - return ret;
> -
> - *asus_wmi_ci++ = asus_wmi_hwmon_chan++;
> - }
> -
> - dev_dbg(dev, "board has %d EC sensors that span %d registers",
> - ec->nr_sensors, ec->nr_registers);
> -
> - hwdev = devm_hwmon_device_register_with_info(dev, "asus_wmi_ec_sensors",
> - sensor_data, chip_info, NULL);
> -
> - return PTR_ERR_OR_ZERO(hwdev);
> -}
> -
> -static int asus_wmi_probe(struct wmi_device *wdev, const void *context)
> -{
> - struct asus_wmi_sensors *sensor_data;
> - struct asus_wmi_data *board_sensors;
> - const struct dmi_system_id *dmi_id;
> - const enum known_ec_sensor *bsi;
> - struct device *dev = &wdev->dev;
> -
> - dmi_id = dmi_first_match(asus_wmi_ec_dmi_table);
> - if (!dmi_id)
> - return -ENODEV;
> -
> - board_sensors = dmi_id->driver_data;
> - bsi = board_sensors->known_board_sensors;
> -
> - sensor_data = devm_kzalloc(dev, sizeof(*sensor_data), GFP_KERNEL);
> - if (!sensor_data)
> - return -ENOMEM;
> -
> - mutex_init(&sensor_data->lock);
> -
> - dev_set_drvdata(dev, sensor_data);
> -
> - return asus_wmi_ec_configure_sensor_setup(dev, bsi);
> -}
> -
> -static const struct wmi_device_id asus_ec_wmi_id_table[] = {
> - { ASUSWMI_MONITORING_GUID, NULL },
> - { }
> -};
> -
> -static struct wmi_driver asus_sensors_wmi_driver = {
> - .driver = {
> - .name = "asus_wmi_ec_sensors",
> - },
> - .id_table = asus_ec_wmi_id_table,
> - .probe = asus_wmi_probe,
> -};
> -module_wmi_driver(asus_sensors_wmi_driver);
> -
> -MODULE_AUTHOR("Ed Brindley <kernel@xxxxxxxxxxxxx>");
> -MODULE_AUTHOR("Eugene Shalygin <eugene.shalygin@xxxxxxxxx>");
> -MODULE_DESCRIPTION("Asus WMI Sensors Driver");
> -MODULE_LICENSE("GPL");
> --
> 2.35.1
>
