On 7/12/22 01:01, Giovanni Cabiddu wrote: > @@ -47,14 +43,14 @@ Description: Reports the current configuration of the QAT device and allows > The following example shows how to change the configuration of > a device configured for running crypto services in order to > run data compression: > - # cat /sys/bus/pci/devices/<BDF>/qat/state > - up > - # cat /sys/bus/pci/devices/<BDF>/qat/cfg_services > - sym;asym > - # echo down > /sys/bus/pci/devices/<BDF>/qat/state > - # echo dc > /sys/bus/pci/devices/<BDF>/qat/cfg_services > - # echo up > /sys/bus/pci/devices/<BDF>/qat/state > - # cat /sys/bus/pci/devices/<BDF>/qat/cfg_services > - dc > + # cat /sys/bus/pci/devices/<BDF>/qat/state > + up > + # cat /sys/bus/pci/devices/<BDF>/qat/cfg_services > + sym;asym > + # echo down > /sys/bus/pci/devices/<BDF>/qat/state > + # echo dc > /sys/bus/pci/devices/<BDF>/qat/cfg_services > + # echo up > /sys/bus/pci/devices/<BDF>/qat/state > + # cat /sys/bus/pci/devices/<BDF>/qat/cfg_services > + dc > > This attribute is only available for qat_4xxx devices. Hi, I think the culprit is just missing code block marker, which is added above. Thanks. -- An old man doll... just what I always wanted! - Clara
