Re: [PATCH v6 4/8] KVM: Extend the memslot to support fd-based private memory

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jun 24, 2022 at 04:54:26PM +0800, Chao Peng wrote:
> On Thu, Jun 23, 2022 at 05:59:49PM -0500, Michael Roth wrote:
> > On Fri, May 20, 2022 at 06:31:02PM +0000, Sean Christopherson wrote:
> > > On Fri, May 20, 2022, Andy Lutomirski wrote:
> > > > The alternative would be to have some kind of separate table or bitmap (part
> > > > of the memslot?) that tells KVM whether a GPA should map to the fd.
> > > > 
> > > > What do you all think?
> > > 
> > > My original proposal was to have expolicit shared vs. private memslots, and punch
> > > holes in KVM's memslots on conversion, but due to the way KVM (and userspace)
> > > handle memslot updates, conversions would be painfully slow.  That's how we ended
> > > up with the current propsoal.
> > > 
> > > But a dedicated KVM ioctl() to add/remove shared ranges would be easy to implement
> > > and wouldn't necessarily even need to interact with the memslots.  It could be a
> > > consumer of memslots, e.g. if we wanted to disallow registering regions without an
> > > associated memslot, but I think we'd want to avoid even that because things will
> > > get messy during memslot updates, e.g. if dirty logging is toggled or a shared
> > > memory region is temporarily removed then we wouldn't want to destroy the tracking.
> > > 
> > > I don't think we'd want to use a bitmap, e.g. for a well-behaved guest, XArray
> > > should be far more efficient.
> > > 
> > > One benefit to explicitly tracking this in KVM is that it might be useful for
> > > software-only protected VMs, e.g. KVM could mark a region in the XArray as "pending"
> > > based on guest hypercalls to share/unshare memory, and then complete the transaction
> > > when userspace invokes the ioctl() to complete the share/unshare.
> > 
> > Another upside to implementing a KVM ioctl is basically the reverse of the
> > discussion around avoiding double-allocations: *supporting* double-allocations.
> > 
> > One thing I noticed while testing SNP+UPM support is a fairly dramatic
> > slow-down with how it handles OVMF, which does some really nasty stuff
> > with DMA where it takes 1 or 2 pages and flips them between
> > shared/private on every transaction. Obviously that's not ideal and
> > should be fixed directly at some point, but it's something that exists in the
> > wild and might not be the only such instance where we need to deal with that
> > sort of usage pattern. 
> > 
> > With the current implementation, one option I had to address this was to
> > disable hole-punching in QEMU when doing shared->private conversions:
> > 
> > Boot time from 1GB guest:
> >                                SNP:   32s
> >                            SNP+UPM: 1m43s
> >   SNP+UPM (disable shared discard): 1m08s
> > 
> > Of course, we don't have the option of disabling discard/hole-punching
> > for private memory to see if we get similar gains there, since that also
> > doubles as the interface for doing private->shared conversions.
> 
> Private should be the same, minus time consumed for private memory, the
> data should be close to SNP case. You can't try that in current version
> due to we rely on the existence of the private page to tell a page is
> private.
> 
> > A separate
> > KVM ioctl to decouple these 2 things would allow for that, and allow for a
> > way for userspace to implement things like batched/lazy-discard of
> > previously-converted pages to deal with cases like these.
> 
> The planned ioctl includes two responsibilities:
>   - Mark the range as private/shared
>   - Zap the existing SLPT mapping for the range
> 
> Whether doing the hole-punching or not on the fd is unrelated to this
> ioctl, userspace has freedom to do that or not. Since we don't reply on
> the fact that private memoy should have been allocated, we can support
> lazy faulting and don't need explicit fallocate(). That means, whether
> the memory is discarded or not in the memory backing store is not
> required by KVM, but be a userspace option.

Nice, that sounds promising.

> 
> > 
> > Another motivator for these separate ioctl is that, since we're considering
> > 'out-of-band' interactions with private memfd where userspace might
> > erroneously/inadvertently do things like double allocations, another thing it
> > might do is pre-allocating pages in the private memfd prior to associating
> > the memfd with a private memslot. Since the notifiers aren't registered until
> > that point, any associated callbacks that would normally need to be done as
> > part of those fallocate() notification would be missed unless we do something
> > like 'replay' all the notifications once the private memslot is registered and
> > associating with a memfile notifier. But that seems a bit ugly, and I'm not
> > sure how well that would work. This also seems to hint at this additional
> > 'conversion' state being something that should be owned and managed directly
> > by KVM rather than hooking into the allocations.
> 
> Right, once we move the private/shared state into KVM then we don't rely
> on those callbacks so the 'replay' thing is unneeded. fallocate()
> notification is useless for sure, invalidate() is likely still needed,
> just like the invalidate for mmu_notifier to bump the mmu_seq and do the
> zap.

Ok, yah, makes sense that we'd still up needing the invalidation hooks.

> 
> > 
> > It would also nicely solve the question of how to handle in-place
> > encryption, since unlike userspace, KVM is perfectly capable of copying
> > data from shared->private prior to conversion / guest start, and
> > disallowing such things afterward. Would just need an extra flag basically.
> 
> Agree it's possible to do additional copy during the conversion but I'm
> not so confident this is urgent and the right API. Currently TDX does
> not have this need. Maybe as the first step just add the conversion
> itself. Adding additional feature like this can always be possible
> whenever we are clear.

That seems fair. In the meantime we can adopt the approach proposed by
Sean and Vishal[1] and handle it directly in the relevant SNP KVM ioctls.

If we end up keeping that approach we'll probably want to make sure these
KVM-driven 'implicit' conversions are documented in the KVM/SNP API so that
userspace can account for it in it's view of what's private/shared. In this
case at least it's pretty obvious, just thinking of when other archs and
VMMs utilizing this more.

Thanks!

-Mike

[1] https://lore.kernel.org/kvm/20220524205646.1798325-4-vannapurve@xxxxxxxxxx/T/#m1e9bb782b1bea66c36ae7c4c9f4f0c35c2d7e338

> 
> Thanks,
> Chao



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux