On Thu, Jun 23, 2022 at 07:32:43PM +0300, Ivan Bornyakov wrote:
> Add support to the FPGA manager for programming Microchip Polarfire
> FPGAs over slave SPI interface with .dat formatted bitsream image.
>
> Changelog:
> v1 -> v2: fix printk formating
> v2 -> v3:
> * replace "microsemi" with "microchip"
> * replace prefix "microsemi_fpga_" with "mpf_"
> * more sensible .compatible and .name strings
> * remove unused defines STATUS_SPI_VIOLATION and STATUS_SPI_ERROR
> v3 -> v4: fix unused variable warning
> Put 'mpf_of_ids' definition under conditional compilation, so it
> would not hang unused if CONFIG_OF is not enabled.
> v4 -> v5:
> * prefix defines with MPF_
> * mdelay() -> usleep_range()
> * formatting fixes
> * add DT bindings doc
> * rework fpga_manager_ops.write() to fpga_manager_ops.write_sg()
> We can't parse image header in write_init() because image header
> size is not known beforehand. Thus parsing need to be done in
> fpga_manager_ops.write() callback, but fpga_manager_ops.write()
> also need to be reenterable. On the other hand,
> fpga_manager_ops.write_sg() is called once. Thus, rework usage of
> write() callback to write_sg().
> v5 -> v6: fix patch applying
> I forgot to clean up unrelated local changes which lead to error on
> patch 0001-fpga-microchip-spi-add-Microchip-MPF-FPGA-manager.patch
> applying on vanilla kernel.
> v6 -> v7: fix binding doc to pass dt_binding_check
> v7 -> v8: another fix for dt_binding_check warning
> v8 -> v9:
> * add another patch to support bitstream offset in FPGA image buffer
> * rework fpga_manager_ops.write_sg() back to fpga_manager_ops.write()
> * move image header parsing from write() to write_init()
> v9 -> v10:
> * add parse_header() callback to fpga_manager_ops
> * adjust fpga_mgr_write_init[_buf|_sg]() for parse_header() usage
> * implement parse_header() in microchip-spi driver
> v10 -> v11: include missing unaligned.h to microchip-spi
> fix error: implicit declaration of function 'get_unaligned_le[16|32]'
> v11 -> v12:
> * microchip-spi: double read hw status, ignore first read, because it
> can be unreliable.
> * microchip-spi: remove sleep between status readings in
> poll_status_not_busy() to save a few seconds. Status is polled on
> every 16 byte writes - that is quite often, therefore
> usleep_range() accumulate to a considerable number of seconds.
> v12 -> v13:
> * fpga-mgr: separate fpga_mgr_parse_header_buf() from
> fpga_mgr_write_init_buf()
> * fpga-mgr: introduce FPGA_MGR_STATE_PARSE_HEADER and
> FPGA_MGR_STATE_PARSE_HEADER_ERR fpga_mgr_states
> * fpga-mgr: rename fpga_mgr_write_init_sg() to fpga_mgr_prepare_sg()
> and rework with respect to a new fpga_mgr_parse_header_buf()
> * fpga-mgr: rework write accounting in fpga_mgr_buf_load_sg() for
> better clarity
> * microchip-spi: rename MPF_STATUS_POLL_TIMEOUT to
> MPF_STATUS_POLL_RETRIES
> * microchip-spi: add comment about status reading quirk to
> mpf_read_status()
> * microchip-spi: rename poll_status_not_busy() to mpf_poll_status()
> and add comment.
> * microchip-spi: make if statement in mpf_poll_status() easier to
> read.
> v13 -> v14:
> * fpga-mgr: improvements from Xu Yilun in
> - fpga_mgr_parse_header_buf()
> - fpga_mgr_write_init_buf()
> - fpga_mgr_prepare_sg()
> - fpga_mgr_buf_load_sg()
> * fpga-mgr: add check for -EAGAIN from fpga_mgr_parse_header_buf()
> when called from fpga_mgr_buf_load_mapped()
> * microchip-spi: remove excessive cs_change from second spi_transfer
> in mpf_read_status()
> * microchip-spi: change type of components_size_start,
> bitstream_start, i from size_t to u32 in mpf_ops_parse_header()
> v14 -> v15: eliminate memcpy() in mpf_ops_write()
> Eliminate excessive memcpy() in mpf_ops_write() by using
> spi_sync_transfer() instead of spi_write().
> v15 -> v16:
> * microchip-spi: change back components_size_start and
> bitstream_start variables types to size_t, i - to u16 in
> mpf_ops_parse_header()
> * fpga-mgr: rename fpga_parse_header_buf() to
> fpga_parse_header_mapped(). It serves only mapped FPGA image now,
> adjust it accordingly.
> * fpga-mgr: separate fpga_mgr_parse_header_sg_first() and
> fpga_mgr_parse_header_sg() from fpga_mgr_prepare_sg()
> v16 -> v17:
> * fpga-mgr: return size of allocated header from
> fpga_mgr_parse_header_sg(), add `char **ret_buf` to function args
> to save pointer to allocated header. This allow us to call
> fpga_mgr_write_init_buf() with exact size of allocated header.
> * document parse_header() callback in fpga-mgr.rst
> v17 -> v18:
> * fpga-mgr: change back fpga_mgr_parse_header_sg() to return
> allocated buffer but set buffer size into output parameter
> * fpga-mgr: check returned pointer from krealloc for ZERO_OR_NULL_PTR
> in fpga_mgr_paese_header_sg() as krealloc may return ZERO_SIZE_PTR.
> * fpga-mgr: in fpga_mgr_prepare_sg() return fpga_mgr_write_init() on
> fast path only when both initial_header_size and parse_header() are
> not defined.
> * docs: fpga-mgr: a few rewords from Xu Yilun
> v18 -> v19:
> * microchip-spi: split multiple assignments on a single line in
> functions mpf_read_status() and mpf_ops_parse_header()
> * fpga-mgr: add braces {} around "else if" arm in
> fpga_mgr_prepare_sg()
> * fpga-mgr: don't reuse krealloc() arg in fpga_mgr_parse_header_sg().
> If krealloc() returns NULL, it doesn't free the original.
> v19 -> v20:
> * fpga-mgr: initialize info->header_size with
> mops->initial_header_size at fpga_mgr_load().
> * fpga-mgr: add mops->skip_header boolean flag. Adjust skipping
> header before write to check against skip_header flag instead of
> mere presence of info->header_size.
> * fpga-mgr: split check for ZERO_OR_NULL_PTR() after realloc() in
> fpga_mgr_parse_header_sg() function to check against zero header +
> check against NULL returned from realloc().
> * docs: fpga-mgr: adjust for skip_header flag.
> * microchip-spi: add skip_header to mpf_ops.
> v20 -> v21:
> * fpga-mgr: in function fpga_mgr_parse_header_sg(), after
> reallocation of a buffer for a new header, copy only exceeding
> part, since realloc preserve old buffer content.
> * fpga-mgr: in function fpga_mgr_buf_load_sg() instead of manually
> counting fragments with header that should be skipped, use
> sg_miter_skip().
> * fpga-mgr: add tag "Suggested-by: Xu Yilun <yilun.xu@xxxxxxxxx>"
> since all changes in fpga-mgr was his ideas.
> * MAINTAINERS: add entry for Microchip PolarFire FPGA drivers as
> Conor Dooley suggested.
> v21 -> v22:
> * fpga-mgr: in function fpga_mgr_buf_load_sg() drop excessive
> sg_miter_stop() when sg_miter_skip() reaches end of sg_mapping_iter
>
> Ivan Bornyakov (5):
> fpga: fpga-mgr: support bitstream offset in image buffer
> docs: fpga: mgr: document parse_header() callback
> fpga: microchip-spi: add Microchip MPF FPGA manager
> dt-bindings: fpga: add binding doc for microchip-spi fpga mgr
> MAINTAINERS: add Microchip PolarFire FPGA drivers entry
>
> .../fpga/microchip,mpf-spi-fpga-mgr.yaml | 44 ++
> Documentation/driver-api/fpga/fpga-mgr.rst | 27 +-
> MAINTAINERS | 8 +
> drivers/fpga/Kconfig | 8 +
> drivers/fpga/Makefile | 1 +
> drivers/fpga/fpga-mgr.c | 223 ++++++++--
> drivers/fpga/microchip-spi.c | 398 ++++++++++++++++++
> include/linux/fpga/fpga-mgr.h | 24 +-
> 8 files changed, 700 insertions(+), 33 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml
> create mode 100644 drivers/fpga/microchip-spi.c
Applied the series to for-next
Thanks for the improvement to FPGA core.
Yilun
>
> --
> 2.36.1
>
