The term "data dependency barrier", which has been in
memory-barriers.txt ever since it was first authored by David Howells,
has become confusing due to the fact that in LKMM's explanations.txt
and elsewhere, "data dependency" is used mostly for load-to-store data
dependency.
To prevent further confusions, do the changes listed below:
- substitute "data dependency barrier" with "address-dependency
barrier";
- add note on the removal of kernel APIs for explicit address-
dependency barriers in kernel release v5.9;
- note that address-dependency barriers are not necessary for
load-to-store situations;
- use READ_ONCE_OLD() for pre-4.15 READ_ONCE() (no implicit address-
dependency barrier);
- fix count of kernel memory barrier APIs;
- and a few more context adjustments.
Note: Cleanups of long lines are deferred to a followup patch.
Reported-by: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20211011064233-mutt-send-email-mst@xxxxxxxxxx/
Signed-off-by: Akira Yokosawa <akiyks@xxxxxxxxx>
Cc: "Paul E. McKenney" <paulmck@xxxxxxxxxx>
Cc: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Cc: Will Deacon <will@xxxxxxxxxx>
Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
Cc: Boqun Feng <boqun.feng@xxxxxxxxx>
Cc: Andrea Parri <parri.andrea@xxxxxxxxx>
Cc: Nicholas Piggin <npiggin@xxxxxxxxx>
Cc: David Howells <dhowells@xxxxxxxxxx>
Cc: Daniel Lustig <dlustig@xxxxxxxxxx>
Cc: Joel Fernandes <joel@xxxxxxxxxxxxxxxxx>
Cc: Jonathan Corbet <corbet@xxxxxxx>
---
Documentation/memory-barriers.txt | 116 ++++++++++++++++--------------
1 file changed, 64 insertions(+), 52 deletions(-)
diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt
index b12df9137e1c..bdbea3cc66a3 100644
--- a/Documentation/memory-barriers.txt
+++ b/Documentation/memory-barriers.txt
@@ -52,7 +52,7 @@ CONTENTS
- Varieties of memory barrier.
- What may not be assumed about memory barriers?
- - Data dependency barriers (historical).
+ - Address-dependency barriers (historical).
- Control dependencies.
- SMP barrier pairing.
- Examples of memory barrier sequences.
@@ -187,7 +187,7 @@ As a further example, consider this sequence of events:
B = 4; Q = P;
P = &B; D = *Q;
-There is an obvious data dependency here, as the value loaded into D depends on
+There is an obvious address dependency here, as the value loaded into D depends on
the address retrieved from P by CPU 2. At the end of the sequence, any of the
following results are possible:
@@ -391,49 +391,53 @@ Memory barriers come in four basic varieties:
memory system as time progresses. All stores _before_ a write barrier
will occur _before_ all the stores after the write barrier.
- [!] Note that write barriers should normally be paired with read or data
- dependency barriers; see the "SMP barrier pairing" subsection.
+ [!] Note that write barriers should normally be paired with read or
+ address-dependency barriers; see the "SMP barrier pairing" subsection.
- (2) Data dependency barriers.
+ (2) Address-dependency barriers (historical).
- A data dependency barrier is a weaker form of read barrier. In the case
+ An address-dependency barrier is a weaker form of read barrier. In the case
where two loads are performed such that the second depends on the result
of the first (eg: the first load retrieves the address to which the second
- load will be directed), a data dependency barrier would be required to
+ load will be directed), an address-dependency barrier would be required to
make sure that the target of the second load is updated after the address
obtained by the first load is accessed.
- A data dependency barrier is a partial ordering on interdependent loads
+ An address-dependency barrier is a partial ordering on interdependent loads
only; it is not required to have any effect on stores, independent loads
or overlapping loads.
As mentioned in (1), the other CPUs in the system can be viewed as
committing sequences of stores to the memory system that the CPU being
- considered can then perceive. A data dependency barrier issued by the CPU
+ considered can then perceive. An address-dependency barrier issued by the CPU
under consideration guarantees that for any load preceding it, if that
load touches one of a sequence of stores from another CPU, then by the
time the barrier completes, the effects of all the stores prior to that
- touched by the load will be perceptible to any loads issued after the data
+ touched by the load will be perceptible to any loads issued after the address-
dependency barrier.
See the "Examples of memory barrier sequences" subsection for diagrams
showing the ordering constraints.
- [!] Note that the first load really has to have a _data_ dependency and
+ [!] Note that the first load really has to have an _address_ dependency and
not a control dependency. If the address for the second load is dependent
on the first load, but the dependency is through a conditional rather than
actually loading the address itself, then it's a _control_ dependency and
a full read barrier or better is required. See the "Control dependencies"
subsection for more information.
- [!] Note that data dependency barriers should normally be paired with
+ [!] Note that address-dependency barriers should normally be paired with
write barriers; see the "SMP barrier pairing" subsection.
+ [!] Kernel release v5.9 removed kernel APIs for explicit address-
+ dependency barriers. Nowadays, APIs for marking loads from shared
+ variables such as READ_ONCE() and rcu_dereference() provide implicit
+ address-dependency barriers.
(3) Read (or load) memory barriers.
- A read barrier is a data dependency barrier plus a guarantee that all the
+ A read barrier is an address-dependency barrier plus a guarantee that all the
LOAD operations specified before the barrier will appear to happen before
all the LOAD operations specified after the barrier with respect to the
other components of the system.
@@ -441,7 +445,7 @@ Memory barriers come in four basic varieties:
A read barrier is a partial ordering on loads only; it is not required to
have any effect on stores.
- Read memory barriers imply data dependency barriers, and so can substitute
+ Read memory barriers imply address-dependency barriers, and so can substitute
for them.
[!] Note that read barriers should normally be paired with write barriers;
@@ -550,17 +554,21 @@ There are certain things that the Linux kernel memory barriers do not guarantee:
Documentation/core-api/dma-api.rst
-DATA DEPENDENCY BARRIERS (HISTORICAL)
--------------------------------------
+ADDRESS-DEPENDENCY BARRIERS (HISTORICAL)
+----------------------------------------
As of v4.15 of the Linux kernel, an smp_mb() was added to READ_ONCE() for
DEC Alpha, which means that about the only people who need to pay attention
to this section are those working on DEC Alpha architecture-specific code
and those working on READ_ONCE() itself. For those who need it, and for
those who are interested in the history, here is the story of
-data-dependency barriers.
+address-dependency barriers.
+
+[!] While address dependencies are observed in both load-to-load and
+load-to-store relations, address-dependency barriers are not necessary
+for load-to-store situations.
-The usage requirements of data dependency barriers are a little subtle, and
+The requirement of address-dependency barriers is a little subtle, and
it's not always obvious that they're needed. To illustrate, consider the
following sequence of events:
@@ -570,10 +578,13 @@ following sequence of events:
B = 4;
<write barrier>
WRITE_ONCE(P, &B);
- Q = READ_ONCE(P);
+ Q = READ_ONCE_OLD(P);
D = *Q;
-There's a clear data dependency here, and it would seem that by the end of the
+[!] READ_ONCE_OLD() corresponds to READ_ONCE() of pre-4.15 kernel, which
+doesn't imply an address-dependency barrier.
+
+There's a clear address dependency here, and it would seem that by the end of the
sequence, Q must be either &A or &B, and that:
(Q == &A) implies (D == 1)
@@ -588,8 +599,8 @@ While this may seem like a failure of coherency or causality maintenance, it
isn't, and this behaviour can be observed on certain real CPUs (such as the DEC
Alpha).
-To deal with this, a data dependency barrier or better must be inserted
-between the address load and the data load:
+To deal with this, READ_ONCE() provides an implicit address-dependency
+barrier since kernel release v4.15:
CPU 1 CPU 2
=============== ===============
@@ -598,7 +609,7 @@ between the address load and the data load:
<write barrier>
WRITE_ONCE(P, &B);
Q = READ_ONCE(P);
- <data dependency barrier>
+ <implicit address-dependency barrier>
D = *Q;
This enforces the occurrence of one of the two implications, and prevents the
@@ -615,7 +626,7 @@ odd-numbered bank is idle, one can see the new value of the pointer P (&B),
but the old value of the variable B (2).
-A data-dependency barrier is not required to order dependent writes
+An address-dependency barrier is not required to order dependent writes
because the CPUs that the Linux kernel supports don't do writes
until they are certain (1) that the write will actually happen, (2)
of the location of the write, and (3) of the value to be written.
@@ -629,12 +640,12 @@ break dependencies in a great many highly creative ways.
B = 4;
<write barrier>
WRITE_ONCE(P, &B);
- Q = READ_ONCE(P);
+ Q = READ_ONCE_OLD(P);
WRITE_ONCE(*Q, 5);
-Therefore, no data-dependency barrier is required to order the read into
+Therefore, no address-dependency barrier is required to order the read into
Q with the store into *Q. In other words, this outcome is prohibited,
-even without a data-dependency barrier:
+even without an implicit address-dependency barrier of modern READ_ONCE():
(Q == &B) && (B == 4)
@@ -645,12 +656,12 @@ can be used to record rare error conditions and the like, and the CPUs'
naturally occurring ordering prevents such records from being lost.
-Note well that the ordering provided by a data dependency is local to
+Note well that the ordering provided by an address dependency is local to
the CPU containing it. See the section on "Multicopy atomicity" for
more information.
-The data dependency barrier is very important to the RCU system,
+The address-dependency barrier is very important to the RCU system,
for example. See rcu_assign_pointer() and rcu_dereference() in
include/linux/rcupdate.h. This permits the current target of an RCU'd
pointer to be replaced with a new modified target, without the replacement
@@ -667,16 +678,17 @@ not understand them. The purpose of this section is to help you prevent
the compiler's ignorance from breaking your code.
A load-load control dependency requires a full read memory barrier, not
-simply a data dependency barrier to make it work correctly. Consider the
+simply an (implicit) address-dependency barrier to make it work correctly. Consider the
following bit of code:
q = READ_ONCE(a);
+ <implicit address-dependency barrier>
if (q) {
- <data dependency barrier> /* BUG: No data dependency!!! */
+ /* BUG: No address dependency!!! */
p = READ_ONCE(b);
}
-This will not have the desired effect because there is no actual data
+This will not have the desired effect because there is no actual address
dependency, but rather a control dependency that the CPU may short-circuit
by attempting to predict the outcome in advance, so that other CPUs see
the load from b as having happened before the load from a. In such a
@@ -927,9 +939,9 @@ General barriers pair with each other, though they also pair with most
other types of barriers, albeit without multicopy atomicity. An acquire
barrier pairs with a release barrier, but both may also pair with other
barriers, including of course general barriers. A write barrier pairs
-with a data dependency barrier, a control dependency, an acquire barrier,
+with an address-dependency barrier, a control dependency, an acquire barrier,
a release barrier, a read barrier, or a general barrier. Similarly a
-read barrier, control dependency, or a data dependency barrier pairs
+read barrier, control dependency, or an address-dependency barrier pairs
with a write barrier, an acquire barrier, a release barrier, or a
general barrier:
@@ -948,7 +960,7 @@ Or:
a = 1;
<write barrier>
WRITE_ONCE(b, &a); x = READ_ONCE(b);
- <data dependency barrier>
+ <implicit address-dependency barrier>
y = *x;
Or even:
@@ -968,7 +980,7 @@ Basically, the read barrier always has to be there, even though it can be of
the "weaker" type.
[!] Note that the stores before the write barrier would normally be expected to
-match the loads after the read barrier or the data dependency barrier, and vice
+match the loads after the read barrier or the address-dependency barrier, and vice
versa:
CPU 1 CPU 2
@@ -1021,7 +1033,7 @@ STORE B, STORE C } all occurring before the unordered set of { STORE D, STORE E
V
-Secondly, data dependency barriers act as partial orderings on data-dependent
+Secondly, address-dependency barriers act as partial orderings on address-dependent
loads. Consider the following sequence of events:
CPU 1 CPU 2
@@ -1067,7 +1079,7 @@ effectively random order, despite the write barrier issued by CPU 1:
In the above example, CPU 2 perceives that B is 7, despite the load of *C
(which would be B) coming after the LOAD of C.
-If, however, a data dependency barrier were to be placed between the load of C
+If, however, an address-dependency barrier were to be placed between the load of C
and the load of *C (ie: B) on CPU 2:
CPU 1 CPU 2
@@ -1078,7 +1090,7 @@ and the load of *C (ie: B) on CPU 2:
<write barrier>
STORE C = &B LOAD X
STORE D = 4 LOAD C (gets &B)
- <data dependency barrier>
+ <address-dependency barrier>
LOAD *C (reads B)
then the following will occur:
@@ -1101,7 +1113,7 @@ then the following will occur:
| +-------+ | |
| | X->9 |------>| |
| +-------+ | |
- Makes sure all effects ---> \ ddddddddddddddddd | |
+ Makes sure all effects ---> \ aaaaaaaaaaaaaaaaa | |
prior to the store of C \ +-------+ | |
are perceptible to ----->| B->2 |------>| |
subsequent loads +-------+ | |
@@ -1292,7 +1304,7 @@ Which might appear as this:
LOAD with immediate effect : : +-------+
-Placing a read barrier or a data dependency barrier just before the second
+Placing a read barrier or an address-dependency barrier just before the second
load:
CPU 1 CPU 2
@@ -1816,20 +1828,20 @@ which may then reorder things however it wishes.
CPU MEMORY BARRIERS
-------------------
-The Linux kernel has eight basic CPU memory barriers:
+The Linux kernel has seven basic CPU memory barriers:
- TYPE MANDATORY SMP CONDITIONAL
- =============== ======================= ===========================
- GENERAL mb() smp_mb()
- WRITE wmb() smp_wmb()
- READ rmb() smp_rmb()
- DATA DEPENDENCY READ_ONCE()
+ TYPE MANDATORY SMP CONDITIONAL
+ ======================= =============== ===============
+ GENERAL mb() smp_mb()
+ WRITE wmb() smp_wmb()
+ READ rmb() smp_rmb()
+ ADDRESS DEPENDENCY READ_ONCE()
-All memory barriers except the data dependency barriers imply a compiler
-barrier. Data dependencies do not impose any additional compiler ordering.
+All memory barriers except the address-dependency barriers imply a compiler
+barrier. Address dependencies do not impose any additional compiler ordering.
-Aside: In the case of data dependencies, the compiler would be expected
+Aside: In the case of address dependencies, the compiler would be expected
to issue the loads in the correct order (eg. `a[b]` would have to load
the value of b before loading a[b]), however there is no guarantee in
the C specification that the compiler may not speculate the value of b
@@ -2888,7 +2900,7 @@ AND THEN THERE'S THE ALPHA
The DEC Alpha CPU is one of the most relaxed CPUs there is. Not only that,
some versions of the Alpha CPU have a split data cache, permitting them to have
two semantically-related cache lines updated at separate times. This is where
-the data dependency barrier really becomes necessary as this synchronises both
+the address-dependency barrier really becomes necessary as this synchronises both
caches with the memory coherence system, thus making it seem like pointer
changes vs new data occur in the right order.
--
2.25.1
