Re: [PATCH v17 2/4] docs: fpga: mgr: document parse_header() callback

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jun 09, 2022 at 06:47:50PM +0300, Ivan Bornyakov wrote:
> Document newly introduced fpga_manager_ops callback parse_header() along
> with header_size and data_size fields of struct fpga_image_info.
> 
> Signed-off-by: Ivan Bornyakov <i.bornyakov@xxxxxxxxxxx>
> ---
>  Documentation/driver-api/fpga/fpga-mgr.rst | 31 ++++++++++++++++------
>  1 file changed, 23 insertions(+), 8 deletions(-)
> 
> diff --git a/Documentation/driver-api/fpga/fpga-mgr.rst b/Documentation/driver-api/fpga/fpga-mgr.rst
> index 42c01f396dce..db0852bd3ddc 100644
> --- a/Documentation/driver-api/fpga/fpga-mgr.rst
> +++ b/Documentation/driver-api/fpga/fpga-mgr.rst
> @@ -79,14 +79,29 @@ do the programming sequence for this particular FPGA.  These ops return 0 for
>  success or negative error codes otherwise.
>  
>  The programming sequence is::
> - 1. .write_init
> - 2. .write or .write_sg (may be called once or multiple times)
> - 3. .write_complete
> -
> -The .write_init function will prepare the FPGA to receive the image data.  The
> -buffer passed into .write_init will be at most .initial_header_size bytes long;
> -if the whole bitstream is not immediately available then the core code will
> -buffer up at least this much before starting.
> + 1. .parse_header

    1. .parse_header (optional, may be called once or multiple times)

> + 2. .write_init
> + 3. .write or .write_sg (may be called once or multiple times)
> + 4. .write_complete
> +
> +The .parse_header function will set header_size and data_size to
> +struct fpga_image_info. If header_size is set, .write function will get image
> +buffer starting at header_size offset from the beginning. If data_size is set,
> +.write function will get data_size bytes of the image buffer, otherwise .write
> +will get data up to the end of image buffer. This will not affect .write_sg,
> +.write_sg will still get whole image in sg_table form. If FPGA image is a

							  If FPGA image is already mapped as a 

Others look good to me.

Thanks,
Yilun

> +single contiguous buffer, whole buffer will be passed into .parse_header.
> +If image is in scatter-gather form, core code will buffer up at least
> +.initial_header_size before the first call of .parse_header, if it is not
> +enough, .parse_header should set desired size into info->header_size and
> +return -EAGAIN, then it will be called again with greater part of image buffer
> +on the input.
> +
> +The .write_init function will prepare the FPGA to receive the image data. The
> +buffer passed into .write_init will be at least info->header_size bytes long,
> +if it's defined, otherwise .initial_header_size; if the whole bitstream is not
> +immediately available then the core code will buffer up at least this much
> +before starting.
>  
>  The .write function writes a buffer to the FPGA. The buffer may be contain the
>  whole FPGA image or may be a smaller chunk of an FPGA image.  In the latter
> -- 
> 2.35.1
> 



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux