From: David Collins <quic_collinsd@xxxxxxxxxxx> Update the description of "reg" property to add the PON_PBS base address along with PON_HLOS base address. Also add "reg-names" property description. Signed-off-by: David Collins <quic_collinsd@xxxxxxxxxxx> Signed-off-by: Anjelique Melendez <quic_amelende@xxxxxxxxxxx> --- New patch series to sperate this patch from applied patches. Last comments from original patch series can be found https://lore.kernel.org/linux-arm-msm/27515993-18f3-8891-4835-9b6a8d7f86b0@xxxxxxxxxxx/ bindings/power/reset/qcom,pon.yaml | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) diff --git a/bindings/power/reset/qcom,pon.yaml b/bindings/power/reset/qcom,pon.yaml index 353f155d..1d8cf900 100644 --- a/bindings/power/reset/qcom,pon.yaml +++ b/bindings/power/reset/qcom,pon.yaml @@ -26,8 +26,26 @@ properties: - qcom,pm8998-pon reg: - maxItems: 1 + description: | + Specifies the SPMI base address for the PON (power-on) peripheral. For + PMICs that have the PON peripheral (GEN3) split into PON_HLOS and PON_PBS + (e.g. PMK8350), this can hold addresses of both PON_HLOS and PON_PBS + peripherals. In that case, the PON_PBS address needs to be specified to + facilitate software debouncing on some PMICs. + minItems: 1 + maxItems: 2 + reg-names: + description: | + For PON GEN1 and GEN2, it should be "pon". For PON GEN3 it should include + "pon_hlos" and optionally "pon_pbs". + minItems: 1 + maxItems: 2 + items: + anyOf: + - const: pon_hlos + - const: pon_pbs + - const: pon pwrkey: type: object $ref: "../../input/qcom,pm8941-pwrkey.yaml#" -- 2.35.1
