Hi, Xuerui, On Sat, May 14, 2022 at 9:11 PM WANG Xuerui <kernel@xxxxxxxxxx> wrote: > > Hi, > > Overall it seems many of the review comments on v9 are not being > respected, and there was no explanation or justification either. It's > probably good netiquette (or rather, common sense) to give proper > replies if you don't feel like changing some of the places. > > I've already privately contacted you about the overall disregard of my > review comments, but for now I'll try to mentally diff the versions and > review the fresher bits. > > On 5/14/22 16:03, Huacai Chen wrote: > > Add some basic documentation for LoongArch. LoongArch is a new RISC ISA, > > which is a bit like MIPS or RISC-V. LoongArch includes a reduced 32-bit > > version (LA32R), a standard 32-bit version (LA32S) and a 64-bit version > > (LA64). > > > > Signed-off-by: Huacai Chen <chenhuacai@xxxxxxxxxxx> > > --- > > Documentation/arch.rst | 1 + > > Documentation/loongarch/features.rst | 3 + > > Documentation/loongarch/index.rst | 21 ++ > > Documentation/loongarch/introduction.rst | 353 +++++++++++++++++++++ > > Documentation/loongarch/irq-chip-model.rst | 168 ++++++++++ > > 5 files changed, 546 insertions(+) > > create mode 100644 Documentation/loongarch/features.rst > > create mode 100644 Documentation/loongarch/index.rst > > create mode 100644 Documentation/loongarch/introduction.rst > > create mode 100644 Documentation/loongarch/irq-chip-model.rst > > > > diff --git a/Documentation/arch.rst b/Documentation/arch.rst > > index 14bcd8294b93..41a66a8b38e4 100644 > > --- a/Documentation/arch.rst > > +++ b/Documentation/arch.rst > > @@ -13,6 +13,7 @@ implementation. > > arm/index > > arm64/index > > ia64/index > > + loongarch/index > > m68k/index > > mips/index > > nios2/index > > diff --git a/Documentation/loongarch/features.rst b/Documentation/loongarch/features.rst > > new file mode 100644 > > index 000000000000..ebacade3ea45 > > --- /dev/null > > +++ b/Documentation/loongarch/features.rst > > @@ -0,0 +1,3 @@ > > +.. SPDX-License-Identifier: GPL-2.0 > > + > > +.. kernel-feat:: $srctree/Documentation/features loongarch > > diff --git a/Documentation/loongarch/index.rst b/Documentation/loongarch/index.rst > > new file mode 100644 > > index 000000000000..d127e07a7ed3 > > --- /dev/null > > +++ b/Documentation/loongarch/index.rst > > @@ -0,0 +1,21 @@ > > +.. SPDX-License-Identifier: GPL-2.0 > > + > > +================================ > > +LoongArch-specific Documentation > > +================================ > > + > > +.. toctree:: > > + :maxdepth: 2 > > + :numbered: > > + > > + introduction > > + irq-chip-model > > + > > + features > > + > > +.. only:: subproject and html > > + > > + Indices > > + ======= > > + > > + * :ref:`genindex` > > diff --git a/Documentation/loongarch/introduction.rst b/Documentation/loongarch/introduction.rst > > new file mode 100644 > > index 000000000000..7c7e512cfbcb > > --- /dev/null > > +++ b/Documentation/loongarch/introduction.rst > > @@ -0,0 +1,353 @@ > > +.. SPDX-License-Identifier: GPL-2.0 > > + > > +========================= > > +Introduction of LoongArch > > +========================= > > + > > +LoongArch is a new RISC ISA, which is a bit like MIPS or RISC-V. LoongArch > > +includes a reduced 32-bit version (LA32R), a standard 32-bit version (LA32S) > > +and a 64-bit version (LA64). There are 4 privilege levels (PLVs) defined in > > +LoongArch: PLV0~PLV3, from high to low. Kernel runs at PLV0 while applications > > +run at PLV3. This document introduces the registers, basic instruction set, > > +virtual memory and some other topics of LoongArch. > > + > > +Registers > > +========= > > + > > +LoongArch registers include general purpose registers (GPRs), floating point > > +registers (FPRs), vector registers (VRs) and control status registers (CSRs) > > +used in privileged mode (PLV0). > > + > > +GPRs > > +---- > > + > > +LoongArch has 32 GPRs ($r0 - $r31), each one is 32bit wide in LA32 and 64bit > > +wide in LA64. $r0 is always zero, and other registers has no special feature, > > +but we actually have an ABI register convention as below. > > + > > +================= =============== =================== ============ > > +Name Alias Usage Preserved > > + across calls > > +================= =============== =================== ============ > > +``$r0`` ``$zero`` Constant zero Unused > > +``$r1`` ``$ra`` Return address No > > +``$r2`` ``$tp`` TLS Unused > > +``$r3`` ``$sp`` Stack pointer Yes > > +``$r4``-``$r11`` ``$a0``-``$a7`` Argument registers No > > +``$r4``-``$r5`` ``$v0``-``$v1`` Return value No > > +``$r12``-``$r20`` ``$t0``-``$t8`` Temp registers No > > +``$r21`` ``$u0`` Reserved Unused > > +``$r22`` ``$fp`` Frame pointer Yes > > +``$r23``-``$r31`` ``$s0``-``$s8`` Static registers Yes > > +================= =============== =================== ============ > > + > > +Note: v0/v1 naming is deprecated, use a0/a1 instead. r21 is named u0 > > +in Linux kernel to save the percpu variables base address. > > Since the v0/v1 names are deprecated, we'd probably want to remove all > mentions of them? I want to keep this. At least when someone read old code, he/she can know what it is. > > And the r21 has no ABI name, so you probably want to clarify a bit. > Either change the "Reserved" to something like "(Kernel-specific) percpu > base address", or remove the "$u0" from the table and replace with "n/a". OK, replace with "n/a". > > > + > > +FPRs > > +---- > > + > > +LoongArch has 32 FPRs ($f0 - $f31), each one is 64bit wide. We also have an > The comment re "64bit wide" is not addressed since v9. Both LA32 and LA64 have 64bit FPRs. > > +ABI register conversion as below. > > + > > +================= ================== =================== ============ > > +Name Alias Usage Preserved > > + across calls > > +================= ================== =================== ============ > > +``$f0``-``$f7`` ``$fa0``-``$fa7`` Argument registers No > > +``$f0``-``$f1`` ``$fv0``-``$fv1`` Return value No > > +``$f8``-``$f23`` ``$ft0``-``$ft15`` Temp registers No > > +``$f24``-``$f31`` ``$fs0``-``$fs7`` Static registers Yes > > +================= ================== =================== ============ > > + > > +Note: fv0/fv1 naming is deprecated, use fa0/fa1 instead. > Same for fv0/fv1. > > + > > +VRs > > +---- > > + > > +LoongArch has 128bit vector extension (LSX, short for Loongson SIMD eXtention) > > +and 256bit vector extension (LASX, short for Loongson Advanced SIMD eXtension). > > +There are also 32 vector registers, $v0 - $v31 for LSX and $x0 - $x31 for LASX. > > +FPRs and VRs are overlapped, e.g. the lower 128bits of $x0 is $v0, and the lower > > +64bits of $v0 is $f0, etc. > While the word "overlap" is used, it feels wrong, just "FPRs and VRs > overlap" would sound more natural. OK, thanks. > > + > > +CSRs > > +---- > > + > > +CSRs can only be used in privileged mode (PLV0): > > + > > +================= ===================================== ============== > > +Address Full Name Abbrev Name > > +================= ===================================== ============== > > +0x0 Current Mode information CRMD > > +0x1 Pre-exception Mode information PRMD > > +0x2 Extended Unit Enable EUEN > > +0x3 Miscellaneous control MISC > > +0x4 Exception Configuration ECFG > > +0x5 Exception Status ESTAT > > +0x6 Exception Return Address ERA > > +0x7 Bad Virtual Address BADV > > +0x8 Bad Instruction BADI > > +0xC Exception Entry Base address EENTRY > > +0x10 TLB Index TLBIDX > > +0x11 TLB Entry High-order bits TLBEHI > > +0x12 TLB Entry Low-order bits 0 TLBELO0 > > +0x13 TLB Entry Low-order bits 1 TLBELO1 > > +0x18 Address Space Identifier ASID > > +0x19 Page Global Directory address for PGDL > > + Lower half address space > > +0x1A Page Global Directory address for PGDH > > + Higher half address space > > +0x1B Page Global Directory address PGD > > +0x1C Page Walk Control for Lower PWCL > > + half address space > > +0x1D Page Walk Control for Higher PWCH > > + half address space > > +0x1E STLB Page Size STLBPS > > +0x1F Reduced Virtual Address Configuration RVACFG > > +0x20 CPU Identifier CPUID > > +0x21 Privileged Resource Configuration 1 PRCFG1 > > +0x22 Privileged Resource Configuration 2 PRCFG2 > > +0x23 Privileged Resource Configuration 3 PRCFG3 > > +0x30+n (0≤n≤15) Data Save register SAVEn > Hmm, now I have a better name -- "Saved Data register". Does that sound > better than "Data Save"? OK, thanks. > > +0x40 Timer Identifier TID > > +0x41 Timer Configuration TCFG > > +0x42 Timer Value TVAL > > +0x43 Compensation of Timer Count CNTC > > +0x44 Timer Interrupt Clearing TICLR > > +0x60 LLBit Control LLBCTL > > +0x80 Implementation-specific Control 1 IMPCTL1 > > +0x81 Implementation-specific Control 2 IMPCTL2 > > +0x88 TLB Refill Exception Entry Base TLBRENTRY > > + address > > +0x89 TLB Refill Exception BAD Virtual TLBRBADV > > + address > > +0x8A TLB Refill Exception Return Address TLBRERA > > +0x8B TLB Refill Exception data SAVE TLBRSAVE > > + register > > +0x8C TLB Refill Exception Entry Low-order TLBRELO0 > > + bits 0 > > +0x8D TLB Refill Exception Entry Low-order TLBRELO1 > > + bits 1 > > +0x8E TLB Refill Exception Entry High-order TLBEHI > > + bits > > +0x8F TLB Refill Exception Pre-exception TLBRPRMD > > + Mode information > > +0x90 Machine Error Control MERRCTL > > +0x91 Machine Error Information 1 MERRINFO1 > > +0x92 Machine Error Information 2 MERRINFO2 > > +0x93 Machine Error Exception Entry Base MERRENTRY > > + address > > +0x94 Machine Error Exception Return MERRERA > > + address > > +0x95 Machine Error Exception data SAVE MERRSAVE > > + register > The inconsistent capitalization is not fixed since v9. OK, thanks. > > +0x98 Cache TAGs CTAG > > +0x180+n (0≤n≤3) Direct Mapping configuration Window n DMWn > > +0x200+2n (0≤n≤31) Performance Monitor Configuration n PMCFGn > > +0x201+2n (0≤n≤31) Performance Monitor overall Counter n PMCNTn > > +0x300 Memory load/store WatchPoint MWPC > > + overall Control > > +0x301 Memory load/store WatchPoint MWPS > > + overall Status > > +0x310+8n (0≤n≤7) Memory load/store WatchPoint n MWPnCFG1 > > + Configuration 1 > > +0x311+8n (0≤n≤7) Memory load/store WatchPoint n MWPnCFG2 > > + Configuration 2 > > +0x312+8n (0≤n≤7) Memory load/store WatchPoint n MWPnCFG3 > > + Configuration 3 > > +0x313+8n (0≤n≤7) Memory load/store WatchPoint n MWPnCFG4 > > + Configuration 4 > > +0x380 Fetch WatchPoint overall Control FWPC > > +0x381 Fetch WatchPoint overall Status FWPS > > +0x390+8n (0≤n≤7) Fetch WatchPoint n Configuration 1 FWPnCFG1 > > +0x391+8n (0≤n≤7) Fetch WatchPoint n Configuration 2 FWPnCFG2 > > +0x392+8n (0≤n≤7) Fetch WatchPoint n Configuration 3 FWPnCFG3 > > +0x393+8n (0≤n≤7) Fetch WatchPoint n Configuration 4 FWPnCFG4 > > +0x500 Debug register DBG > > +0x501 Debug Exception Return address DERA > > +0x502 Debug data SAVE register DSAVE > > +================= ===================================== ============== > > + > > +ERA，TLBRERA，MERREEA and ERA sometimes are also called EPC，TLBREPC > > +MERREPC and DEPC. > > + > > +Basic Instruction Set > > +===================== > > + > > +Instruction formats > > +------------------- > > + > > +LoongArch has 32-bit wide instructions, and there are 9 instruction formats:: > > I forgot to mention this while reviewing v9, but obviously we have more > formats (there are actually 39 in total [1]), so let's adjust this to > say "9 basic instruction formats" instead. You really can't pretend > there are only 9 formats when even ubiquitous ones like LU12I.W have > formats not similar to any of the 9 listed. OK, add a "basic". > > [1]: https://github.com/loongson-community/loongarch-opcodes > > > + > > + 2R-type: Opcode + Rj + Rd > > + 3R-type: Opcode + Rk + Rj + Rd > > + 4R-type: Opcode + Ra + Rk + Rj + Rd > > + 2RI8-type: Opcode + I8 + Rj + Rd > > + 2RI12-type: Opcode + I12 + Rj + Rd > > + 2RI14-type: Opcode + I14 + Rj + Rd > > + 2RI16-type: Opcode + I16 + Rj + Rd > > + 1RI21-type: Opcode + I21L + Rj + I21H > > + I26-type: Opcode + I26L + I26H > > + > > +Rj and Rk are source operands (register), Rd is destination operand (register), > > +and Ra is the additional operand (register) in 4R-type. I8/I12/I16/I21/I26 are > Better reorder so Rd comes first, so that we describe from LSB to MSB. > > +8-bits/12-bits/16-bits/21-bits/26bits immediate data. 21bits/26bits immediate > > +data are split into higher bits and lower bits in an instruction word, so you > > +can see I21L/I21H and I26L/I26H here. Begin with opcode seems more natural. > > + > > +Instruction names (Mnemonics) > > +----------------------------- > > + > > +We only list the instruction names here, for details please read the > > +:ref:`references <loongarch-references>`. > > + > > +1. Arithmetic Operation Instructions:: > > + > > + ADD.W SUB.W ADDI.W ADD.D SUB.D ADDI.D > > + SLT SLTU SLTI SLTUI > > + AND OR NOR XOR ANDN ORN ANDI ORI XORI > > + MUL.W MULH.W MULH.WU DIV.W DIV.WU MOD.W MOD.WU > > + MUL.D MULH.D MULH.DU DIV.D DIV.DU MOD.D MOD.DU > > + PCADDI PCADDU12I PCADDU18I > > + LU12I.W LU32I.D LU52I.D ADDU16I.D > Do we really have ADDU16I.D in the v1.00 manual? I'd want that in my > binutils today! ;-) > > + > > +2. Bit-shift Instructions:: > > + > > + SLL.W SRL.W SRA.W ROTR.W SLLI.W SRLI.W SRAI.W ROTRI.W > > + SLL.D SRL.D SRA.D ROTR.D SLLI.D SRLI.D SRAI.D ROTRI.D > > + > > +3. Bit-manipulation Instructions:: > > + > > + EXT.W.B EXT.W.H CLO.W CLO.D SLZ.W CLZ.D CTO.W CTO.D CTZ.W CTZ.D > > + BYTEPICK.W BYTEPICK.D BSTRINS.W BSTRINS.D BSTRPICK.W BSTRPICK.D > > + REVB.2H REVB.4H REVB.2W REVB.D REVH.2W REVH.D BITREV.4B BITREV.8B BITREV.W BITREV.D > > + MASKEQZ MASKNEZ > > + > > +4. Branch Instructions:: > > + > > + BEQ BNE BLT BGE BLTU BGEU BEQZ BNEZ B BL JIRL > > + > > +5. Load/Store Instructions:: > > + > > + LD.B LD.BU LD.H LD.HU LD.W LD.WU LD.D ST.B ST.H ST.W ST.D > > + LDX.B LDX.BU LDX.H LDX.HU LDX.W LDX.WU LDX.D STX.B STX.H STX.W STX.D > > + LDPTR.W LDPTR.D STPTR.W STPTR.D > > + PRELD PRELDX > > + > > +6. Atomic Operation Instructions:: > > + > > + LL.W SC.W LL.D SC.D > > + AMSWAP.W AMSWAP.D AMADD.W AMADD.D AMAND.W AMAND.D AMOR.W AMOR.D AMXOR.W AMXOR.D > > + AMMAX.W AMMAX.D AMMIN.W AMMIN.D > > + > > +7. Barrier Instructions:: > > + > > + IBAR DBAR > > + > > +8. Special Instructions:: > > + > > + SYSCALL BREAK CPUCFG NOP IDLE ERTN DBCL RDTIMEL.W RDTIMEH.W RDTIME.D ASRTLE.D ASRTGT.D > > + > > +9. Privileged Instructions:: > > + > > + CSRRD CSRWR CSRXCHG > > + IOCSRRD.B IOCSRRD.H IOCSRRD.W IOCSRRD.D IOCSRWR.B IOCSRWR.H IOCSRWR.W IOCSRWR.D > > + CACOP TLBP(TLBSRCH) TLBRD TLBWR TLBFILL TLBCLR TLBFLUSH INVTLB LDDIR LDPTE > > Why mention TLBP along with TLBSRCH? Is that an old name? If so you > could revive names like DBGCALL, ERET and CACHE as well... OK, add as well. > > Otherwise just remove it. > > > + > > +Virtual Memory > > +============== > > + > > +LoongArch can use direct-mapped virtual memory and page-mapped virtual memory. > > + > > +Direct-mapped virtual memory is configured by CSR.DMWn (n=0~3), it has a simple > > +relationship between virtual address (VA) and physical address (PA):: > > + > > + VA = PA + FixedOffset > > + > > +Page-mapped virtual memory has arbitrary relationship between VA and PA, which > > +is recorded in TLB and page tables. LoongArch's TLB includes a fully-associative > > +MTLB (Multiple Page Size TLB) and set-associative STLB (Single Page Size TLB). > > + > > +By default, the whole virtual address space of LA32 is configured like this: > > + > > +============ =========================== ============================= > > +Name Address Range Attributes > > +============ =========================== ============================= > > +``UVRANGE`` ``0x00000000 - 0x7FFFFFFF`` Page-mapped, Cached, PLV0~3 > > +``KPRANGE0`` ``0x80000000 - 0x9FFFFFFF`` Direct-mapped, Uncached, PLV0 > > +``KPRANGE1`` ``0xA0000000 - 0xBFFFFFFF`` Direct-mapped, Cached, PLV0 > > +``KVRANGE`` ``0xC0000000 - 0xFFFFFFFF`` Page-mapped, Cached, PLV0 > So these names are not changed, despite I asked in v9 pointing out > they're "awfully MIPS-like". And there is not the explanation for the > name inventions either. Just a name, we don't want to modify. > > +============ =========================== ============================= > > + > > +User mode (PLV3) can only access UVRANGE. For direct-mapped KPRANGE0 and > > +KPRANGE1, PA is equal to VA with bit30~31 cleared. For example, the uncached > > +direct-mapped VA of 0x00001000 is 0x80001000, and the cached direct-mapped > > +VA of 0x00001000 is 0xA0001000. > > + > > +By default, the whole virtual address space of LA64 is configured like this: > > + > > +============ ====================== ====================================== > > +Name Address Range Attributes > > +============ ====================== ====================================== > > +``XUVRANGE`` ``0x0000000000000000 - Page-mapped, Cached, PLV0~3 > > + 0x3FFFFFFFFFFFFFFF`` > > +``XSPRANGE`` ``0x4000000000000000 - Direct-mapped, Cached / Uncached, PLV0 > > + 0x7FFFFFFFFFFFFFFF`` > > +``XKPRANGE`` ``0x8000000000000000 - Direct-mapped, Cached / Uncached, PLV0 > > + 0xBFFFFFFFFFFFFFFF`` > > +``XKVRANGE`` ``0xC000000000000000 - Page-mapped, Cached, PLV0 > > + 0xFFFFFFFFFFFFFFFF`` > > +============ ====================== ====================================== > > + > > +User mode (PLV3) can only access XUVRANGE. For direct-mapped XSPRANGE and XKPRANGE, > > +PA is equal to VA with bit60~63 cleared, and the cache attributes is configured by > > +bit60~61 (0 is strongly-ordered uncached, 1 is coherent cached, and 2 is weakly- > > +ordered uncached) in VA. Currently we only use XKPRANGE for direct mapping and > > +XSPRANGE is reserved. As an example, the strongly-ordered uncached direct-mapped VA > > +(in XKPRANGE) of 0x00000000 00001000 is 0x80000000 00001000, the coherent cached > > +direct-mapped VA (in XKPRANGE) of 0x00000000 00001000 is 0x90000000 00001000, and > > +the weakly-ordered uncached direct-mapped VA (in XKPRANGE) of 0x00000000 00001000 > > +is 0xA0000000 00001000. > > + > > +Relationship of Loongson and LoongArch > > +====================================== > > + > > +LoongArch is a RISC ISA which is different from any other existing ones, while > > +Loongson is a family of processors. Loongson includes 3 series: Loongson-1 is > > +the 32-bit processor series, Loongson-2 is the low-end 64-bit processor series, > > +and Loongson-3 is the high-end 64-bit processor series. Old Loongson is based on > > +MIPS, while New Loongson is based on LoongArch. Take Loongson-3 as an example: > > +Loongson-3A1000/3B1500/3A2000/3A3000/3A4000 are MIPS-compatible, while Loongson- > > +3A5000 (and future revisions) are all based on LoongArch. > This section is not reworked either. Because it needn't rework. > > + > > +.. _loongarch-references: > > + > > +References > > +========== > > + > > +Official web site of Loongson and LoongArch (Loongson Technology Corp. Ltd.): > > + > > + http://www.loongson.cn/index.html > > + > > +Developer web site of Loongson and LoongArch (Software and Documentation): > > + > > + http://www.loongnix.cn/index.php > And the v9 suggestion here (better replace with link to the > documentation repo than this user-facing portal). The description here is "Software and Documentation", not just Documentation. Huacai > > + > > + https://github.com/loongson > > + > > +Documentation of LoongArch ISA: > > + > > + https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-Vol1-v1.00-CN.pdf (in Chinese) > > + > > + https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-Vol1-v1.00-EN.pdf (in English) > > + > > +Documentation of LoongArch ELF ABI: > > + > > + https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-ELF-ABI-v1.00-CN.pdf (in Chinese) > > + > > + https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-ELF-ABI-v1.00-EN.pdf (in English) > > + > > +Linux kernel repository of Loongson and LoongArch: > > + > > + https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson.git > > diff --git a/Documentation/loongarch/irq-chip-model.rst b/Documentation/loongarch/irq-chip-model.rst > > new file mode 100644 > > index 000000000000..35c962991283 > > --- /dev/null > > +++ b/Documentation/loongarch/irq-chip-model.rst > > @@ -0,0 +1,168 @@ > > +.. SPDX-License-Identifier: GPL-2.0 > > + > > +======================================= > > +IRQ chip model (hierarchy) of LoongArch > > +======================================= > > + > > +Currently, LoongArch based processors (e.g. Loongson-3A5000) can only work together > > +with LS7A chipsets. The irq chips in LoongArch computers include CPUINTC (CPU Core > > +Interrupt Controller), LIOINTC (Legacy I/O Interrupt Controller), EIOINTC (Extended > > +I/O Interrupt Controller), HTVECINTC (Hyper-Transport Vector Interrupt Controller), > > +PCH-PIC (Main Interrupt Controller in LS7A chipset), PCH-LPC (LPC Interrupt Controller > > +in LS7A chipset) and PCH-MSI (MSI Interrupt Controller). > > + > > +CPUINTC is a per-core controller (in CPU), LIOINTC/EIOINTC/HTVECINTC are per-package > > +controllers (in CPU), while PCH-PIC/PCH-LPC/PCH-MSI are controllers out of CPU (i.e., > > +in chipsets). These controllers (in other words, irqchips) are linked in a hierarchy, > > +and there are two models of hierarchy (legacy model and extended model). > > + > > +Legacy IRQ model > > +================ > > + > > +In this model, IPI (Inter-Processor Interrupt) and CPU Local Timer interrupt go > > +to CPUINTC directly, CPU UARTS interrupts go to LIOINTC, while all other devices > > +interrupts go to PCH-PIC/PCH-LPC/PCH-MSI and gathered by HTVECINTC, and then go > > +to LIOINTC, and then CPUINTC. > > + > > + +---------------------------------------------+ > > + |:: | > > + | | > > + | +-----+ +---------+ +-------+ | > > + | | IPI | --> | CPUINTC | <-- | Timer | | > > + | +-----+ +---------+ +-------+ | > > + | ^ | > > + | | | > > + | +---------+ +-------+ | > > + | | LIOINTC | <-- | UARTs | | > > + | +---------+ +-------+ | > > + | ^ | > > + | | | > > + | +-----------+ | > > + | | HTVECINTC | | > > + | +-----------+ | > > + | ^ ^ | > > + | | | | > > + | +---------+ +---------+ | > > + | | PCH-PIC | | PCH-MSI | | > > + | +---------+ +---------+ | > > + | ^ ^ ^ | > > + | | | | | > > + | +---------+ +---------+ +---------+ | > > + | | PCH-LPC | | Devices | | Devices | | > > + | +---------+ +---------+ +---------+ | > > + | ^ | > > + | | | > > + | +---------+ | > > + | | Devices | | > > + | +---------+ | > > + | | > > + | | > > + +---------------------------------------------+ > > + > > +Extended IRQ model > > +================== > > + > > +In this model, IPI (Inter-Processor Interrupt) and CPU Local Timer interrupt go > > +to CPUINTC directly, CPU UARTS interrupts go to LIOINTC, while all other devices > > +interrupts go to PCH-PIC/PCH-LPC/PCH-MSI and gathered by EIOINTC, and then go to > > +to CPUINTC directly. > > + > > + +--------------------------------------------------------+ > > + |:: | > > + | | > > + | +-----+ +---------+ +-------+ | > > + | | IPI | --> | CPUINTC | <-- | Timer | | > > + | +-----+ +---------+ +-------+ | > > + | ^ ^ | > > + | | | | > > + | +---------+ +---------+ +-------+ | > > + | | EIOINTC | | LIOINTC | <-- | UARTs | | > > + | +---------+ +---------+ +-------+ | > > + | ^ ^ | > > + | | | | > > + | +---------+ +---------+ | > > + | | PCH-PIC | | PCH-MSI | | > > + | +---------+ +---------+ | > > + | ^ ^ ^ | > > + | | | | | > > + | +---------+ +---------+ +---------+ | > > + | | PCH-LPC | | Devices | | Devices | | > > + | +---------+ +---------+ +---------+ | > > + | ^ | > > + | | | > > + | +---------+ | > > + | | Devices | | > > + | +---------+ | > > + | | > > + | | > > + +--------------------------------------------------------+ > > + > > +ACPI-related definitions > > +======================== > > + > > +CPUINTC:: > > + > > + ACPI_MADT_TYPE_CORE_PIC; > > + struct acpi_madt_core_pic; > > + enum acpi_madt_core_pic_version; > > + > > +LIOINTC:: > > + > > + ACPI_MADT_TYPE_LIO_PIC; > > + struct acpi_madt_lio_pic; > > + enum acpi_madt_lio_pic_version; > > + > > +EIOINTC:: > > + > > + ACPI_MADT_TYPE_EIO_PIC; > > + struct acpi_madt_eio_pic; > > + enum acpi_madt_eio_pic_version; > > + > > +HTVECINTC:: > > + > > + ACPI_MADT_TYPE_HT_PIC; > > + struct acpi_madt_ht_pic; > > + enum acpi_madt_ht_pic_version; > > + > > +PCH-PIC:: > > + > > + ACPI_MADT_TYPE_BIO_PIC; > > + struct acpi_madt_bio_pic; > > + enum acpi_madt_bio_pic_version; > > + > > +PCH-MSI:: > > + > > + ACPI_MADT_TYPE_MSI_PIC; > > + struct acpi_madt_msi_pic; > > + enum acpi_madt_msi_pic_version; > > + > > +PCH-LPC:: > > + > > + ACPI_MADT_TYPE_LPC_PIC; > > + struct acpi_madt_lpc_pic; > > + enum acpi_madt_lpc_pic_version; > > + > > +References > > +========== > > + > > +Documentation of Loongson-3A5000: > > + > > + https://github.com/loongson/LoongArch-Documentation/releases/latest/download/Loongson-3A5000-usermanual-1.02-CN.pdf (in Chinese) > > + > > + https://github.com/loongson/LoongArch-Documentation/releases/latest/download/Loongson-3A5000-usermanual-1.02-EN.pdf (in English) > > + > > +Documentation of Loongson's LS7A chipset: > > + > > + https://github.com/loongson/LoongArch-Documentation/releases/latest/download/Loongson-7A1000-usermanual-2.00-CN.pdf (in Chinese) > > + > > + https://github.com/loongson/LoongArch-Documentation/releases/latest/download/Loongson-7A1000-usermanual-2.00-EN.pdf (in English) > > + > > +Note: CPUINTC is CSR.ECFG/CSR.ESTAT and its interrupt controller described > > +in Section 7.4 of "LoongArch Reference Manual, Vol 1"; LIOINTC is "Legacy I/O > > +Interrupts" described in Section 11.1 of "Loongson 3A5000 Processor Reference > > +Manual"; EIOINTC is "Extended I/O Interrupts" described in Section 11.2 of > > +"Loongson 3A5000 Processor Reference Manual"; HTVECINTC is "HyperTransport > > +Interrupts" described in Section 14.3 of "Loongson 3A5000 Processor Reference > > +Manual"; PCH-PIC/PCH-MSI is "Interrupt Controller" described in Section 5 of > > +"Loongson 7A1000 Bridge User Manual"; PCH-LPC is "LPC Interrupts" described in > > +Section 24.3 of "Loongson 7A1000 Bridge User Manual".
