Re: [RFC PATCH v6 11/11] dt-bindings: net: dsa: qca8k: add LEDs definition example

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, May 04, 2022 at 12:15:48PM -0500, Rob Herring wrote:
> On Tue, May 03, 2022 at 05:16:33PM +0200, Ansuel Smith wrote:
> > Add LEDs definition example for qca8k using the offload trigger as the
> > default trigger and add all the supported offload triggers by the
> > switch.
> > 
> > Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx>
> > ---
> >  .../devicetree/bindings/net/dsa/qca8k.yaml    | 20 +++++++++++++++++++
> >  1 file changed, 20 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> > index f3c88371d76c..9b46ef645a2d 100644
> > --- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> > +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> > @@ -65,6 +65,8 @@ properties:
> >                   internal mdio access is used.
> >                   With the legacy mapping the reg corresponding to the internal
> >                   mdio is the switch reg with an offset of -1.
> > +                 Each phy have at least 3 LEDs connected and can be declared
> 
> s/at least/up to/ ?
> 
> Or your example is wrong with only 2.
>

Up to. Internally the regs are there but 99% of the times OEM just
connect 2 of 3 LEDs. Will fix. 

> > +                 using the standard LEDs structure.
> >  
> >  patternProperties:
> >    "^(ethernet-)?ports$":
> > @@ -287,6 +289,24 @@ examples:
> >  
> >                  internal_phy_port1: ethernet-phy@0 {
> >                      reg = <0>;
> > +
> > +                    leds {
> > +                        led@0 {
> > +                            reg = <0>;
> > +                            color = <LED_COLOR_ID_WHITE>;
> > +                            function = LED_FUNCTION_LAN;
> > +                            function-enumerator = <1>;
> > +                            linux,default-trigger = "netdev";
> > +                        };
> > +
> > +                        led@1 {
> > +                            reg = <1>;
> > +                            color = <LED_COLOR_ID_AMBER>;
> > +                            function = LED_FUNCTION_LAN;
> > +                            function-enumerator = <1>;
> > +                            linux,default-trigger = "netdev";
> > +                        };
> > +                    };
> >                  };
> >  
> >                  internal_phy_port2: ethernet-phy@1 {
> > -- 
> > 2.34.1
> > 
> > 

-- 
	Ansuel



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux