On Mon, Jun 10, 2013 at 11:35:55AM +0200, Sebastian Hesselbarth wrote:
> This patch add a DT enabled driver for timers found on Marvell Orion SoCs
> (Kirkwood, Dove, Orion5x, and Discovery Innovation). It installs a free-
> running clocksource on timer0 and a clockevent source on timer1.
> Corresponding device tree documentation is also added.
>
> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
> ---
> Changelog:
> v3->v4:
> - export thread-safe access to TIMER_CTRL register to use with watchdog
> - remove IRQF_DISABLED and add .irq to clock event (Suggested by Daniel Lezcano)
>
> Notes:
> - This is only an update to clocksource driver, the remaining patches are
> not resent as they have not been changed.
> - I will not rework orion watchdog driver for this patch set. It is written
> Kirkwood/Orion5x specific although it will also work on Dove and it is messing
> with shared registers. It has done it before, so I consider it broken anyway.
> I (or somebody else) will take care of proper watchdog later.
> - An updated branch can be found on
> git://github.com/shesselba/linux-dove.git orion-irqchip-for-v3.11_v4
Hi Sebastian
You can add a
Tested-by: Andrew Lunn <andrew@xxxxxxx>
I tested on my kirkwood QNAP.
CPU0
2: 6062 bridge-interrupt-ctrl orion_event
9: 0 f1010140.gpio Reset
15: 0 f1010140.gpio USB Copy
24: 106 main-interrupt-ctrl ehci_hcd:usb1
25: 2463 main-interrupt-ctrl sata_mv
26: 0 main-interrupt-ctrl f1030000.crypto
27: 2 main-interrupt-ctrl f1060800.xor
28: 2 main-interrupt-ctrl f1060800.xor
29: 71 main-interrupt-ctrl mv64xxx_i2c
30: 2 main-interrupt-ctrl f1060900.xor
31: 2 main-interrupt-ctrl f1060900.xor
32: 41 main-interrupt-ctrl eth0
33: 1317 main-interrupt-ctrl serial
75: 745 main-interrupt-ctrl f1072004.mdio-bus
Err: 0
Andrew
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
