On 2022/4/28 0:04, Catalin Marinas wrote: > On Wed, Apr 27, 2022 at 09:49:20PM +0800, Leizhen (ThunderTown) wrote: >> On 2022/4/27 20:32, Catalin Marinas wrote: >>> I think one could always pass a default command line like: >>> >>> crashkernel=1G,high crashkernel=128M,low >>> >>> without much knowledge of the SoC memory layout. >> >> Yes, that's what the end result is. The user specify crashkernel=128M,low >> and the implementation ensure the 128M low memory is allocated from DMA zone. >> We use arm64_dma_phys_limit as the upper limit for crash low memory. >> >> +#define CRASH_ADDR_LOW_MAX arm64_dma_phys_limit >> + unsigned long long crash_max = CRASH_ADDR_LOW_MAX; >> + crash_base = memblock_phys_alloc_range(crash_size, CRASH_ALIGN, >> crash_base, crash_max); >> >>> Another option is to only introduce crashkernel=Y,low and, when that is >>> passed, crashkernel=Y can go above arm64_dma_phys_limit. We won't need a >>> 'high' option at all: >>> >>> crashkernel=1G - all within ZONE_DMA >>> crashkernel=1G crashkernel=128M,low - 128M in ZONE_DMA >>> 1G above ZONE_DMA >>> >>> If ZONE_DMA is not present or it extends to the whole RAM, we can ignore >>> the 'low' option. >> >> I think although the code is hard to make generic, the interface is better to >> be relatively uniform. A user might have to maintain both x86 and arm64, and >> so on. It's not a good thing that the difference is too big. > > There will be some difference as the 4G limit doesn't always hold for > arm64 (though it's true in most cases). Anyway, we can probably simplify > things a bit while following the documented behaviour: > > crashkernel=Y - current behaviour within ZONE_DMA > crashkernel=Y,high - allocate from above ZONE_DMA > crashkernel=Y,low - allocate within ZONE_DMA > > There is no fallback from crashkernel=Y. Yes, I followed your guidelines yesterday to modify the code. Now the code flow is much clearer. > > The question is whether we still want a default low allocation if > crashkernel=Y,low is missing but 'high' is present. If we add this, I > think we'd be consistent with kernel-parameters.txt for the 'low' > description. A default 'low' is probably not that bad but I'm tempted to > always mandate both 'high' and 'low'. Yes, I agree with you. Because the situation is complicated, the default value is hard to be accurate. It's better to let the user configure it according to the actual situation, they're also programmers. Whether mandate both 'high' and 'low', or allow only 'high' like x86(but the default value becomes zero). I prefer the latter. The size of 'low' maybe zero, for example, SMMU is enabled on the second kernel. If only high memory is required, only that high memory needs to be configured, seems more reasonable. > -- Regards, Zhen Lei
