On Mon, Jun 10, 2013 at 10:27:57AM +0100, Srinivas KANDAGATLA wrote: > This patch adds stih415 and stih416 support to multi_v7_defconfig. This seems to drop a few options also: CONFIG_ARM_ARCH_TIMER CONFIG_ARM_ERRATA_754322 CONFIG_EXPERIMENTAL CONFIG_GPIO_PL061 CONFIG_MMC_WMT I just applied this to v3.10-rc5, and ran `make ARCH=arm multi_v7_defconfig`. It seems MMC_WMT and GPIO_PL061 get selected elsewhere, but ARM_ARCH_TIMER and ARM_ERRATA_754322 are left unselected. Thanks, Mark. > > Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxx> > CC: Arnd Bergmann <arnd@xxxxxxxx> > --- > arch/arm/configs/multi_v7_defconfig | 32 +++++++++++++++----------------- > 1 files changed, 15 insertions(+), 17 deletions(-) > > diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig > index 2e67a27..8a5cd5c 100644 > --- a/arch/arm/configs/multi_v7_defconfig > +++ b/arch/arm/configs/multi_v7_defconfig > @@ -1,23 +1,20 @@ > -CONFIG_EXPERIMENTAL=y > CONFIG_NO_HZ=y > CONFIG_HIGH_RES_TIMERS=y > CONFIG_ARCH_MVEBU=y > CONFIG_MACH_ARMADA_370=y > -CONFIG_ARCH_SIRF=y > CONFIG_MACH_ARMADA_XP=y > CONFIG_ARCH_HIGHBANK=y > CONFIG_ARCH_SOCFPGA=y > -CONFIG_ARCH_SUNXI=y > -CONFIG_ARCH_WM8850=y > -# CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set > -CONFIG_ARCH_ZYNQ=y > -CONFIG_ARM_ERRATA_754322=y > CONFIG_PLAT_SPEAR=y > CONFIG_ARCH_SPEAR13XX=y > CONFIG_MACH_SPEAR1310=y > CONFIG_MACH_SPEAR1340=y > +CONFIG_ARCH_STIXXXX=y > +CONFIG_ARCH_SUNXI=y > +CONFIG_ARCH_SIRF=y > +CONFIG_ARCH_WM8850=y > +CONFIG_ARCH_ZYNQ=y > CONFIG_SMP=y > -CONFIG_ARM_ARCH_TIMER=y > CONFIG_AEABI=y > CONFIG_HIGHMEM=y > CONFIG_HIGHPTE=y > @@ -25,27 +22,30 @@ CONFIG_ARM_APPENDED_DTB=y > CONFIG_VFP=y > CONFIG_NEON=y > CONFIG_NET=y > +CONFIG_DEVTMPFS=y > CONFIG_BLK_DEV_SD=y > CONFIG_ATA=y > +CONFIG_SATA_AHCI_PLATFORM=y > CONFIG_SATA_HIGHBANK=y > CONFIG_SATA_MV=y > -CONFIG_SATA_AHCI_PLATFORM=y > CONFIG_NETDEVICES=y > CONFIG_NET_CALXEDA_XGMAC=y > CONFIG_SMSC911X=y > CONFIG_STMMAC_ETH=y > +CONFIG_KEYBOARD_SPEAR=y > CONFIG_SERIO_AMBAKMI=y > CONFIG_SERIAL_8250=y > CONFIG_SERIAL_8250_CONSOLE=y > CONFIG_SERIAL_8250_DW=y > -CONFIG_KEYBOARD_SPEAR=y > CONFIG_SERIAL_AMBA_PL011=y > CONFIG_SERIAL_AMBA_PL011_CONSOLE=y > -CONFIG_SERIAL_OF_PLATFORM=y > CONFIG_SERIAL_SIRFSOC=y > CONFIG_SERIAL_SIRFSOC_CONSOLE=y > CONFIG_SERIAL_VT8500=y > CONFIG_SERIAL_VT8500_CONSOLE=y > +CONFIG_SERIAL_OF_PLATFORM=y > +CONFIG_SERIAL_ST_ASC=y > +CONFIG_SERIAL_ST_ASC_CONSOLE=y > CONFIG_IPMI_HANDLER=y > CONFIG_IPMI_SI=y > CONFIG_I2C=y > @@ -54,7 +54,6 @@ CONFIG_I2C_SIRF=y > CONFIG_SPI=y > CONFIG_SPI_PL022=y > CONFIG_SPI_SIRF=y > -CONFIG_GPIO_PL061=y > CONFIG_FB=y > CONFIG_FB_ARMCLCD=y > CONFIG_FB_WM8505=y > @@ -67,7 +66,6 @@ CONFIG_MMC_ARMMMCI=y > CONFIG_MMC_SDHCI=y > CONFIG_MMC_SDHCI_PLTFM=y > CONFIG_MMC_SDHCI_SPEAR=y > -CONFIG_MMC_WMT=y > CONFIG_EDAC=y > CONFIG_EDAC_MM_EDAC=y > CONFIG_EDAC_HIGHBANK_MC=y > @@ -75,9 +73,9 @@ CONFIG_EDAC_HIGHBANK_L2=y > CONFIG_RTC_CLASS=y > CONFIG_RTC_DRV_PL031=y > CONFIG_RTC_DRV_VT8500=y > -CONFIG_PWM=y > -CONFIG_PWM_VT8500=y > CONFIG_DMADEVICES=y > -CONFIG_PL330_DMA=y > -CONFIG_SIRF_DMA=y > CONFIG_DW_DMAC=y > +CONFIG_SIRF_DMA=y > +CONFIG_PL330_DMA=y > +CONFIG_PWM=y > +CONFIG_PWM_VT8500=y > -- > 1.7.6.5 > > _______________________________________________ > devicetree-discuss mailing list > devicetree-discuss@xxxxxxxxxxxxxxxx > https://lists.ozlabs.org/listinfo/devicetree-discuss > -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
