On 06/06/2013 06:27 PM, Sebastian Hesselbarth wrote:
> This patch add a DT enabled driver for timers found on Marvell Orion SoCs
> (Kirkwood, Dove, Orion5x, and Discovery Innovation). It installs a free-
> running clocksource on timer0 and a clockevent source on timer1.
> Corresponding device tree documentation is also added.
>
> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
> ---
> Cc: Grant Likely <grant.likely@xxxxxxxxxx>
> Cc: Rob Herring <rob.herring@xxxxxxxxxxx>
> Cc: Rob Landley <rob@xxxxxxxxxxx>
> Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
> Cc: John Stultz <john.stultz@xxxxxxxxxx>
> Cc: Russell King <linux@xxxxxxxxxxxxxxxx>
> Cc: Jason Cooper <jason@xxxxxxxxxxxxxx>
> Cc: Andrew Lunn <andrew@xxxxxxx>
> Cc: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
> Cc: Gregory Clement <gregory.clement@xxxxxxxxxxxxxxxxxx>
> Cc: devicetree-discuss@xxxxxxxxxxxxxxxx
> Cc: linux-doc@xxxxxxxxxxxxxxx
> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> ---
> .../bindings/timer/marvell,orion-timer.txt | 17 +++
> drivers/clocksource/Kconfig | 5 +
> drivers/clocksource/Makefile | 1 +
> drivers/clocksource/time-orion.c | 143 ++++++++++++++++++++
> 4 files changed, 166 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/timer/marvell,orion-timer.txt
> create mode 100644 drivers/clocksource/time-orion.c
>
> diff --git a/Documentation/devicetree/bindings/timer/marvell,orion-timer.txt b/Documentation/devicetree/bindings/timer/marvell,orion-timer.txt
> new file mode 100644
> index 0000000..62bb826
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/marvell,orion-timer.txt
> @@ -0,0 +1,17 @@
> +Marvell Orion SoC timer
> +
> +Required properties:
> +- compatible: shall be "marvell,orion-timer"
> +- reg: base address of the timer register starting with TIMERS CONTROL register
> +- interrupt-parent: phandle of the bridge interrupt controller
> +- interrupts: should contain the interrupts for Timer0 and Timer1
> +- clocks: phandle of timer reference clock (tclk)
> +
> +Example:
> + timer: timer {
> + compatible = "marvell,orion-timer";
> + reg = <0x20300 0x20>;
> + interrupt-parent = <&bridge_intc>;
> + interrupts = <1>, <2>;
> + clocks = <&core_clk 0>;
> + };
> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> index f151c6c..2404869 100644
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -25,6 +25,11 @@ config DW_APB_TIMER_OF
> config ARMADA_370_XP_TIMER
> bool
>
> +config ORION_TIMER
> + select CLKSRC_OF
> + select CLKSRC_MMIO
> + bool
> +
> config SUN4I_TIMER
> bool
[ ... ]
> +
> +static irqreturn_t orion_clkevt_irq_handler(int irq, void *dev_id)
> +{
> + orion_clkevt.event_handler(&orion_clkevt);
> + return IRQ_HANDLED;
> +}
> +
> +static struct irqaction orion_clkevt_irq = {
> + .name = "orion_event",
> + .flags = IRQF_DISABLED | IRQF_TIMER,
IRQF_DISABLED is deprecated, it is a noop, you shall remove it.
> + .handler = orion_clkevt_irq_handler,
> +};
> +
> +static void __init orion_timer_init(struct device_node *np)
> +{
[ ... ]
> + /* setup timer1 as clockevent timer */
> + if (setup_irq(irq, &orion_clkevt_irq))
> + panic("%s: unable to setup irq\n", np->name);
> +
> + ticks_per_jiffy = (clk_get_rate(clk) + HZ/2) / HZ;
> + orion_clkevt.cpumask = cpumask_of(0);
orion_clkevt.irq = irq;
> + clockevents_config_and_register(&orion_clkevt, clk_get_rate(clk),
> + ORION_ONESHOT_MIN, ORION_ONESHOT_MAX);
> +}
> +CLOCKSOURCE_OF_DECLARE(orion_timer, "marvell,orion-timer", orion_timer_init);
>
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
