On Mon, Apr 11, 2022 at 01:05:03PM -0700, Anjelique Melendez wrote: > From: David Collins <quic_collinsd@xxxxxxxxxxx> > > Update the description of "reg" property to add the PON_PBS base > address along with PON_HLOS base address. Also add "reg-names" > property description. > > Signed-off-by: David Collins <quic_collinsd@xxxxxxxxxxx> > Signed-off-by: Anjelique Melendez <quic_amelende@xxxxxxxxxxx> > --- > .../bindings/power/reset/qcom,pon.yaml | 20 +++++++++++++++++++- > 1 file changed, 19 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml > index 353f155d..542200b2 100644 > --- a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml > +++ b/Documentation/bindings/power/reset/qcom,pon.yaml > @@ -26,7 +26,25 @@ properties: > - qcom,pm8998-pon > > reg: > - maxItems: 1 > + description: | > + Specifies the SPMI base address for the PON (power-on) peripheral. For > + PMICs that have the PON peripheral (GEN3) split into PON_HLOS and PON_PBS > + (e.g. PMK8350), this can hold addresses of both PON_HLOS and PON_PBS > + peripherals. In that case, the PON_PBS address needs to be specified to > + facilitate software debouncing on some PMICs. > + minItems: 1 > + maxItems: 2 > + > + reg-names: > + description: | > + For PON GEN1 and GEN2, it should be "pon". For PON GEN3 it should include > + "pon_hlos" and optionally "pon_pbs". > + minItems: 1 > + maxItems: 2 > + items: > + - const: pon_hlos > + - const: pon_pbs > + - const: pon This says there are 3 entries, but you limited to 2. The schema also doesn't match what the description says. Entries should be extended by adding new entries to the end and keeping optional entries last. So like this: minItems: 1 items: - const: pon - const: pon_hlos - const: pon_pbs Rob
