On Tue, May 21, 2013 at 10:08 PM, Manjunathappa, Prakash <prakash.pm@xxxxxx> wrote: > Add support to configure multiple pins in each register, existing > implementation added by [1] does not support full fledge multiple pin > configuration in single register, reports a pin clash when different > modules configure different bits of same register. The issue reported > and discussed here > http://www.spinics.net/lists/arm-kernel/msg235213.html > > With pinctrl-single,bits-per-mux property specified, use function-mask > property to find out number pins to configure. Allocate and register > pin control functions based sub mask. > > Tested on da850/omap-l138 EVM. > does not support variable submask for pins. > does not support pinconf. > > [1] "pinctrl: pinctrl-single: Add pinctrl-single,bits type of mux" > (9e605cb68a21d5704839a192a46ebcf387773704), > > Signed-off-by: Manjunathappa, Prakash <prakash.pm@xxxxxx> > Reported-by: Lad, Prabhakar <prabhakar.csengg@xxxxxxxxx> > Tested-by: Lad, Prabhakar <prabhakar.csengg@xxxxxxxxx> Excuse me for response late. Acked-by: Haojian Zhuang <haojian.zhuang@xxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html