On Mon, Mar 21, 2022 at 2:22 AM Randy Dunlap <rdunlap@xxxxxxxxxxxxx> wrote:
>
> Clean up some of admin-guide/kernel-parameters.txt:
>
> a. "smt" should be "smt=" (S390)
> b. add "smt-enabled" for POWERPC
> c. Sparc supports the vdso= boot option
> d. make the tp_printk options (2) formatting similar to other options
> by adding spacing
> e. add "trace_clock=" with a reference to Documentation/trace/ftrace.rst
> f. use [IA-64] as documented instead of [ia64]
> g. fix formatting and text for test_suspend=
This ->
> h. fix formatting for swapaccount=
> i. fix formatting and grammar for video.brightness_switch_enabled=
-> and the last one are fine with me, but I suppose that there will be a v2?
> Signed-off-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
> Cc: Heiko Carstens <hca@xxxxxxxxxxxxx>
> Cc: Vasily Gorbik <gor@xxxxxxxxxxxxx>
> Cc: Alexander Gordeev <agordeev@xxxxxxxxxxxxx>
> Cc: Christian Borntraeger <borntraeger@xxxxxxxxxxxxx>
> Cc: Sven Schnelle <svens@xxxxxxxxxxxxx>
> Cc: linux-s390@xxxxxxxxxxxxxxx
> Cc: Steven Rostedt <rostedt@xxxxxxxxxxx>
> Cc: Ingo Molnar <mingo@xxxxxxxxxx>
> Cc: "David S. Miller" <davem@xxxxxxxxxxxxx>
> Cc: sparclinux@xxxxxxxxxxxxxxx
> Cc: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
> Cc: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
> Cc: Paul Mackerras <paulus@xxxxxxxxx>
> Cc: linuxppc-dev@xxxxxxxxxxxxxxxx
> Cc: linux-ia64@xxxxxxxxxxxxxxx
> Cc: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
> Cc: Pavel Machek <pavel@xxxxxx>
> Cc: Len Brown <lenb@xxxxxxxxxx>
> Cc: linux-pm@xxxxxxxxxxxxxxx
> Cc: linux-acpi@xxxxxxxxxxxxxxx
> Cc: Johannes Weiner <hannes@xxxxxxxxxxx>
> Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
> Cc: Jonathan Corbet <corbet@xxxxxxx>
> Cc: linux-doc@xxxxxxxxxxxxxxx
> ---
> Documentation/admin-guide/kernel-parameters.txt | 33 +++++++++-----
> 1 file changed, 22 insertions(+), 11 deletions(-)
>
> --- linux-next-20220318.orig/Documentation/admin-guide/kernel-parameters.txt
> +++ linux-next-20220318/Documentation/admin-guide/kernel-parameters.txt
> @@ -2814,7 +2814,7 @@
> different yeeloong laptops.
> Example: machtype=lemote-yeeloong-2f-7inch
>
> - max_addr=nn[KMG] [KNL,BOOT,ia64] All physical memory greater
> + max_addr=nn[KMG] [KNL,BOOT,IA-64] All physical memory greater
> than or equal to this physical address is ignored.
>
> maxcpus= [SMP] Maximum number of processors that an SMP kernel
> @@ -3057,7 +3057,7 @@
>
> mga= [HW,DRM]
>
> - min_addr=nn[KMG] [KNL,BOOT,ia64] All physical memory below this
> + min_addr=nn[KMG] [KNL,BOOT,IA-64] All physical memory below this
> physical address is ignored.
>
> mini2440= [ARM,HW,KNL]
> @@ -5382,13 +5382,19 @@
> 1: Fast pin select (default)
> 2: ATC IRMode
>
> - smt [KNL,S390] Set the maximum number of threads (logical
> + smt= [KNL,S390] Set the maximum number of threads (logical
> CPUs) to use per physical CPU on systems capable of
> symmetric multithreading (SMT). Will be capped to the
> actual hardware limit.
> Format: <integer>
> Default: -1 (no limit)
>
> + smt-enabled= [PPC 64-bit] Enable SMT, disable SMT, or set the
> + maximum number of threads. This can be used to override
> + the Open Firmware (OF) option.
> + Format: on | off | <integer>
> + Default: all threads enabled
> +
> softlockup_panic=
> [KNL] Should the soft-lockup detector generate panics.
> Format: 0 | 1
> @@ -5768,8 +5774,9 @@
> This parameter controls use of the Protected
> Execution Facility on pSeries.
>
> - swapaccount=[0|1]
> - [KNL] Enable accounting of swap in memory resource
> + swapaccount= [KNL]
> + Format: [0|1]
> + Enable accounting of swap in memory resource
> controller if no parameter or 1 is given or disable
> it if 0 is given (See Documentation/admin-guide/cgroup-v1/memory.rst)
>
> @@ -5815,7 +5822,8 @@
>
> tdfx= [HW,DRM]
>
> - test_suspend= [SUSPEND][,N]
> + test_suspend= [SUSPEND]
> + Format: { "mem" | "standby" | "freeze" }[,N]
> Specify "mem" (for Suspend-to-RAM) or "standby" (for
> standby suspend) or "freeze" (for suspend type freeze)
> as the system sleep state during system startup with
> @@ -5902,6 +5910,8 @@
> trace_buf_size=nn[KMG]
> [FTRACE] will set tracing buffer size on each cpu.
>
> + trace_clock= [FTRACE] See Documentation/trace/ftrace.rst
> +
> trace_event=[event-list]
> [FTRACE] Set and start specified trace events in order
> to facilitate early boot debugging. The event-list is a
> @@ -5924,7 +5934,7 @@
> See also Documentation/trace/ftrace.rst "trace options"
> section.
>
> - tp_printk[FTRACE]
> + tp_printk [FTRACE]
> Have the tracepoints sent to printk as well as the
> tracing ring buffer. This is useful for early boot up
> where the system hangs or reboots and does not give the
> @@ -5946,7 +5956,7 @@
> frequency tracepoints such as irq or sched, can cause
> the system to live lock.
>
> - tp_printk_stop_on_boot[FTRACE]
> + tp_printk_stop_on_boot [FTRACE]
> When tp_printk (above) is set, it can cause a lot of noise
> on the console. It may be useful to only include the
> printing of events during boot up, as user space may
> @@ -6295,7 +6305,7 @@
> HIGHMEM regardless of setting
> of CONFIG_HIGHPTE.
>
> - vdso= [X86,SH]
> + vdso= [X86,SH,SPARC]
> On X86_32, this is an alias for vdso32=. Otherwise:
>
> vdso=1: enable VDSO (the default)
> @@ -6321,11 +6331,12 @@
> video= [FB] Frame buffer configuration
> See Documentation/fb/modedb.rst.
>
> - video.brightness_switch_enabled= [0,1]
> + video.brightness_switch_enabled= [ACPI]
> + Format: [0|1]
> If set to 1, on receiving an ACPI notify event
> generated by hotkey, video driver will adjust brightness
> level and then send out the event to user space through
> - the allocated input device; If set to 0, video driver
> + the allocated input device. If set to 0, video driver
> will only send out the event without touching backlight
> brightness level.
> default: 1
