On Sun, Jun 02, 2013 at 10:14:19PM +0200, Arnaud Ebalard wrote: > > Signed-off-by: Arnaud Ebalard <arno@xxxxxxxxxxxx> > --- > drivers/hwmon/Kconfig | 10 + > drivers/hwmon/Makefile | 1 + > drivers/hwmon/g762.c | 1179 ++++++++++++++++++++++++++++++++++++ > include/linux/platform_data/g762.h | 51 ++ > 4 files changed, 1241 insertions(+) > create mode 100644 drivers/hwmon/g762.c > create mode 100644 include/linux/platform_data/g762.h > [ ... ] > +static inline int g762_read_byte(const struct i2c_client *client, u8 reg, > + u8 *dest) > +{ > + int ret; > + > + ret = i2c_smbus_read_byte_data(client, reg); > + if (ret < 0) { > + dev_err(&client->dev, "failed to read reg %x02x, err %d\n", > + (int)reg, ret); I would suggest to write a piece of test code for the above statement and observe its output. "printf("%x02x\n", 0x1234);" should do. Is the error message really needed ? If there is a persistent error, it will clog the log. Thanks, Guenter -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html