On Tue, 28 May 2013 18:34:07 +0200, Christian Ruppert <christian.ruppert@xxxxxxxxxx> wrote:
> The SOC interrupt controller driver for the Abilis Systems TB10x series of
> SOCs based on ARC700 CPUs.
>
> Signed-off-by: Christian Ruppert <christian.ruppert@xxxxxxxxxx>
> Signed-off-by: Pierrick Hascoet <pierrick.hascoet@xxxxxxxxxx>
> ---
> .../interrupt-controller/abilis,tb10x_ictl.txt | 38 ++++
> arch/arc/boot/dts/abilis_tb100.dtsi | 32 ++--
> arch/arc/boot/dts/abilis_tb101.dtsi | 32 ++--
> arch/arc/boot/dts/abilis_tb10x.dtsi | 30 ++--
> arch/arc/plat-tb10x/Kconfig | 1 +
> drivers/irqchip/Kconfig | 5 +
> drivers/irqchip/Makefile | 1 +
> drivers/irqchip/irq-tb10x.c | 205 ++++++++++++++++++++
> 8 files changed, 291 insertions(+), 53 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x_ictl.txt
> create mode 100644 drivers/irqchip/irq-tb10x.c
>
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x_ictl.txt b/Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x_ictl.txt
> new file mode 100644
> index 0000000..bc292cd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x_ictl.txt
> @@ -0,0 +1,38 @@
> +TB10x Top Level Interrupt Controller
> +====================================
> +
> +The Abilis TB10x SOC contains a custom interrupt controller. It performs
> +one-to-one mapping of external interrupt sources to CPU interrupts and
> +provides support for reconfigurable trigger modes.
> +
> +Required properties
> +-------------------
> +
> +- compatible: Should be "abilis,tb10x_ictl"
Use '-' instead of underscore for compatible values. Otherwise the
binding looks fine.
> +- reg: specifies physical base address and size of register range.
> +- interrupt-congroller: Identifies the node as an interrupt controller.
> +- #interrupt cells: Specifies the number of cells used to encode an interrupt
> + source connected to this controller. The value shall be 2.
> +- interrupt-parent: Specifies the parent interrupt controller.
> +- interrupts: Specifies the list of interrupt lines which are handled by
> + the interrupt controller in the parent controller's notation. Interrupts
> + are mapped one-to-one to parent interrupts.
> +
> +Example
> +-------
> +
> +intc: interrupt-controller { /* Parent interrupt controller */
> + interrupt-controller;
> + #interrupt-cells = <1>; /* For example below */
> + /* ... */
> +};
> +
> +tb10x_ictl: pic@2000 { /* TB10x interrupt controller */
> + compatible = "abilis,tb10x_ictl";
> + reg = <0x2000 0x20>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&intc>;
> + interrupts = <5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
> + 20 21 22 23 24 25 26 27 28 29 30 31>;
> +};
[...]
> +#define AB_IRQCTL_MAXIRQ 32
> +#define TB10X_IRQCHIP_BASE NR_CPU_IRQS
> +
> +static inline void ab_irqctl_writereg(struct irq_chip_generic *gc, u32 reg,
> + u32 val)
> +{
> + irq_reg_writel(val, (u32 *)(gc->reg_base + reg));
In most cases, if you have to use a cast, then the code is unsafe.
->reg_base is a void*, so the cast should be unnecessary.
> +}
> +
> +static inline u32 ab_irqctl_readreg(struct irq_chip_generic *gc, u32 reg)
> +{
> + return irq_reg_readl((u32 *)(gc->reg_base + reg));
> +}
> +
> +static int tb10x_irq_set_type(struct irq_data *data, unsigned int flow_type)
> +{
> + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
> + unsigned int irq = data->irq;
irq is used exactly once for a debug pr_err(). I'd drop it from here.
> + unsigned int hwirq = irqd_to_hwirq(data);
> + uint32_t im, mod, pol;
> +
> + im = BIT(hwirq);
data->mask should work here with Thomas' branch (see below)
> +
> + irq_gc_lock(gc);
> +
> + mod = ab_irqctl_readreg(gc, AB_IRQCTL_SRC_MODE) | im;
> + pol = ab_irqctl_readreg(gc, AB_IRQCTL_SRC_POLARITY) | im;
> +
> + switch (flow_type & IRQF_TRIGGER_MASK) {
> + case IRQ_TYPE_EDGE_FALLING:
> + pol ^= im;
> + break;
> + case IRQ_TYPE_LEVEL_HIGH:
> + mod ^= im;
> + break;
> + case IRQ_TYPE_NONE:
> + flow_type = IRQ_TYPE_LEVEL_LOW;
> + case IRQ_TYPE_LEVEL_LOW:
> + mod ^= im;
> + pol ^= im;
> + break;
> + case IRQ_TYPE_EDGE_RISING:
> + break;
> + default:
> + irq_gc_unlock(gc);
> + pr_err("%s: Cannot assign multiple trigger modes to IRQ %d.\n",
> + __func__, irq);
> + return -EBADR;
> + }
> +
> + irqd_set_trigger_type(data, flow_type);
> + irq_setup_alt_chip(data, flow_type);
> +
> + ab_irqctl_writereg(gc, AB_IRQCTL_SRC_MODE, mod);
> + ab_irqctl_writereg(gc, AB_IRQCTL_SRC_POLARITY, pol);
> + ab_irqctl_writereg(gc, AB_IRQCTL_INT_STATUS, im);
> +
> + irq_gc_unlock(gc);
> +
> + return IRQ_SET_MASK_OK;
> +}
> +
> +static struct irq_domain_ops irq_tb10x_domain_ops = {
> + .xlate = irq_domain_xlate_twocell,
> +};
> +
> +static void tb10x_irq_cascade(unsigned int irq, struct irq_desc *desc)
> +{
> + struct irq_domain *domain = irq_desc_get_handler_data(desc);
> +
> + generic_handle_irq(irq_find_mapping(domain, irq));
> +}
> +
> +static int __init of_tb10x_init_irq(struct device_node *ictl,
> + struct device_node *parent)
> +{
> + int i, ret, nrirqs = of_irq_count(ictl);
> + u32 mask = 0;
> + struct resource mem;
> + struct irq_chip_generic *gc;
> + struct irq_domain *domain;
> + void __iomem *reg_base;
> +
> + if (of_address_to_resource(ictl, 0, &mem)) {
> + pr_err("%s: No registers declared in DeviceTree.\n",
> + ictl->name);
> + return -EINVAL;
> + }
> +
> + if (!request_mem_region(mem.start, resource_size(&mem),
> + ictl->name)) {
> + pr_err("%s: Request mem region failed.\n", ictl->name);
> + return -EBUSY;
> + }
> +
> + reg_base = ioremap(mem.start, resource_size(&mem));
> + if (!reg_base) {
> + ret = -EBUSY;
> + pr_err("%s: ioremap failed.\n", ictl->name);
> + goto ioremap_fail;
> + }
> +
> + gc = irq_alloc_generic_chip(ictl->name, 2, TB10X_IRQCHIP_BASE,
> + reg_base, handle_level_irq);
> + if (!gc) {
> + ret = -ENOMEM;
> + pr_err("%s: Could not allocate generic interrupt chip.\n",
> + ictl->name);
> + goto gc_alloc_fail;
> + }
Thomas has merged patches to add irq_alloc_domain_generic_chips() which
you should be using here. It takes care of linking the generic chip into
the irq domain. You can find the patches in the irq/for-arm branch of
the tip tree:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git
> +
> + gc->chip_types[0].type = IRQ_TYPE_LEVEL_MASK;
> + gc->chip_types[0].chip.irq_mask = irq_gc_mask_clr_bit;
> + gc->chip_types[0].chip.irq_unmask = irq_gc_mask_set_bit;
> + gc->chip_types[0].chip.irq_set_type = tb10x_irq_set_type;
> + gc->chip_types[0].regs.mask = AB_IRQCTL_INT_ENABLE;
> +
> + gc->chip_types[1].type = IRQ_TYPE_EDGE_BOTH;
> + gc->chip_types[1].chip.name = gc->chip_types[0].chip.name;
> + gc->chip_types[1].chip.irq_ack = irq_gc_ack_set_bit;
> + gc->chip_types[1].chip.irq_mask = irq_gc_mask_clr_bit;
> + gc->chip_types[1].chip.irq_unmask = irq_gc_mask_set_bit;
> + gc->chip_types[1].chip.irq_set_type = tb10x_irq_set_type;
> + gc->chip_types[1].regs.ack = AB_IRQCTL_INT_STATUS;
> + gc->chip_types[1].regs.mask = AB_IRQCTL_INT_ENABLE;
> + gc->chip_types[1].handler = handle_edge_irq;
> +
> + domain = irq_domain_add_legacy(ictl, AB_IRQCTL_MAXIRQ,
> + TB10X_IRQCHIP_BASE, 0,
> + &irq_tb10x_domain_ops, gc);
> + if (!domain) {
> + ret = -ENOMEM;
> + pr_err("%s: Could not register interrupt domain.\n",
> + ictl->name);
> + goto irq_domain_add_fail;
> + }
> +
> + for (i = 0; i < nrirqs; i++) {
> + unsigned int irq = irq_of_parse_and_map(ictl, i);
> +
> + irq_set_handler_data(irq, domain);
> + irq_set_chained_handler(irq, tb10x_irq_cascade);
> +
> + mask |= BIT(of_irq_to_resource(ictl, i, NULL));
> + }
> +
> + ab_irqctl_writereg(gc, AB_IRQCTL_INT_ENABLE, 0);
> + ab_irqctl_writereg(gc, AB_IRQCTL_INT_MODE, 0);
> + ab_irqctl_writereg(gc, AB_IRQCTL_INT_POLARITY, 0);
> + ab_irqctl_writereg(gc, AB_IRQCTL_INT_STATUS, ~0UL);
> +
> + irq_setup_generic_chip(gc, mask, IRQ_GC_INIT_MASK_CACHE,
> + IRQ_NOREQUEST, IRQ_NOPROBE);
> +
> + return 0;
> +
> +irq_domain_add_fail:
> + kfree(gc);
> +gc_alloc_fail:
> + iounmap(gc->reg_base);
> +ioremap_fail:
> + release_mem_region(mem.start, resource_size(&mem));
> + return ret;
> +}
> +IRQCHIP_DECLARE(tb10x_intc, "abilis,tb10x_ictl", of_tb10x_init_irq);
> --
> 1.7.1
>
--
Grant Likely, B.Sc, P.Eng.
Secret Lab Technologies, Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
