+ Florian Hi Afzal, On 05/27/2013 04:37 PM, Afzal Mohammed wrote: > DT source (minimal) for AM4372 SoC to represent AM43x SoC's. Those > represented here are the minimal DT nodes necessary to get kernel > booting. > > In DT nodes, "ti,hwmod" property has not been added, this would be > added along with PRCM support for AM43x. > > Signed-off-by: Ankur Kishore <a-kishore@xxxxxx> > Signed-off-by: Afzal Mohammed <afzal@xxxxxx> > --- > > v2: Add gptimer 1ms, timer2, synctimer and remove twd local timer > > arch/arm/boot/dts/am4372.dtsi | 66 +++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 66 insertions(+) > create mode 100644 arch/arm/boot/dts/am4372.dtsi > > diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi > new file mode 100644 > index 0000000..1d58298 > --- /dev/null > +++ b/arch/arm/boot/dts/am4372.dtsi > @@ -0,0 +1,66 @@ > +/* > + * Device Tree Source for AM4372 SoC > + * > + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ > + * > + * This file is licensed under the terms of the GNU General Public License > + * version 2. This program is licensed "as is" without any warranty of any > + * kind, whether express or implied. > + */ > + > +/include/ "skeleton.dtsi" You can now use the C preprocessor statement instead of this one. Florian already started doing the change [1]. Beside that detail, that patch looks good to me. I'll pull it separately of the series. Regards, Benoit [1] http://thread.gmane.org/gmane.linux.ports.arm.omap/98320 > + > +/ { > + compatible = "ti,am4372", "ti,am43"; > + interrupt-parent = <&gic>; > + > + > + aliases { > + serial0 = &uart1; > + }; > + > + cpus { > + cpu@0 { > + compatible = "arm,cortex-a9"; > + }; > + }; > + > + gic: interrupt-controller@48241000 { > + compatible = "arm,cortex-a9-gic"; > + interrupt-controller; > + #interrupt-cells = <3>; > + reg = <0x48241000 0x1000>, > + <0x48240100 0x0100>; > + }; > + > + ocp { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + uart1: serial@44e09000 { > + compatible = "ti,am4372-uart","ti,omap2-uart"; > + reg = <0x44e09000 0x2000>; > + interrupts = <0 72 0x4>; > + }; > + > + timer1: timer@44e31000 { > + compatible = "ti,am4372-timer-1ms","ti,am335x-timer-1ms"; > + reg = <0x44e31000 0x400>; > + interrupts = <0 67 0x4>; > + ti,timer-alwon; > + }; > + > + timer2: timer@48040000 { > + compatible = "ti,am4372-timer","ti,am335x-timer"; > + reg = <0x48040000 0x400>; > + interrupts = <0 68 0x4>; > + }; > + > + counter32k: counter@44e86000 { > + compatible = "ti,am4372-counter32k","ti,omap-counter32k"; > + reg = <0x44e86000 0x40>; > + }; > + }; > +}; > -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html