The Platform Environment Control Interface (PECI) is a communication interface between Intel processors and management controllers (e.g. Baseboard Management Controller, BMC). This series adds a PECI subsystem and introduces drivers which run in the Linux instance on the management controller (not the main Intel processor) and is intended to be used by the OpenBMC [1], a Linux distribution for BMC devices. The information exposed over PECI (like processor and DIMM temperature) refers to the Intel processor and can be consumed by daemons running on the BMC to, for example, display the processor temperature in its web interface. The PECI bus is collection of code that provides interface support between PECI devices (that actually represent processors) and PECI controllers (such as the "peci-aspeed" controller) that allow to access physical PECI interface. PECI devices are bound to PECI drivers that provides access to PECI services. This series introduces a generic "peci-cpu" driver that exposes hardware monitoring "cputemp" and "dimmtemp" using the auxiliary bus. Exposing "raw" PECI to userspace, either to write userspace drivers or for debug/testing purpose was left out of this series to encourage writing kernel drivers instead, but may be pursued in the future. Introducing PECI to upstream Linux was already attempted before [2]. Since it's been over a year since last revision, and the series changed quite a bit in the meantime, I've decided to start from v1. I would also like to give credit to everyone who helped me with different aspects of preliminary review: - Pierre-Louis Bossart, - Tony Luck, - Andy Shevchenko, - Dave Hansen. [1] https://github.com/openbmc/openbmc [2] https://lore.kernel.org/openbmc/20191211194624.2872-1-jae.hyun.yoo@xxxxxxxxxxxxxxx/ Changes v6 -> v7: * Fixed Kconfig warnings (lkp@xxxxxxxxx) Changes v5 -> v6: * Added missing COMMON_CLK selection (lkp@xxxxxxxxx) * Fixed WARN_ON always evaluated to true (lkp@xxxxxxxxx) * Clean interrupt status unconditionally (Joel) * Replaced memcpy_toio()/memcpy_fromio() with writel()/readl() to avoid issues when submitting unaligned PECI commands Changes v4 -> v5: * Added clk_aspeed_peci to express controller programming using common clock framework (Billy) * Modified peci-aspeed DTS schema to match clock changes (Billy) * Added workaround for peci-aspeed controller hang (Billy) * Removed unnecessary "else after return" (Guenter) Changes v3 -> v4: * Fixed an issue where peci doesn't work after host shutdown (Zev) * Replaced kill_device() with peci_device_del_lock (Greg) * Fixed dts_valid() parameter type (Guenter) * Removed Jae from MAINTAINERS file (Jae) Changes v2 -> v3: * Dropped x86/cpu patches (Boris) * Dropped pr_fmt() for PECI module (Dan) * Fixed releasing peci controller device flow (Dan) * Improved peci-aspeed commit-msg and Kconfig help (Dan) * Fixed aspeed_peci_xfer() to use the proper spin_lock function (Dan) * Wrapped print_hex_dump_bytes() in CONFIG_DYNAMIC_DEBUG (Dan) * Removed debug status logs from aspeed_peci_irq_handler() (Dan) * Renamed functions using devres to start with "devm" (Dan) * Changed request to be allocated on stack in peci_detect (Dan) * Removed redundant WARN_ON on invalid PECI addr (Dan) * Changed peci_device_create() to use device_initialize() + device_add() pattern (Dan) * Fixed peci_device_destroy() to use kill_device() avoiding double-free (Dan) * Renamed functions that perform xfer using "peci_xfer_*" prefix (Dan) * Renamed peci_request_data_dib(temp) -> peci_request_dib(temp)_read (Dan) * Fixed thermal margin readings for older Intel processors (Zev) * Misc hwmon simplifications (Guenter) * Used BIT_PER_TYPE to verify macro value constrains (Guenter) * Improved WARN_ON message to print chan_rank_max and idx_dimm_max (Guenter) * Improved dimmtemp to not reattempt probe if no dimms are populated Changes v1 -> v2: Biggest changes when it comes to diffstat are locking in HWMON (I decided to clean things up a bit while adding it), switching to devres usage in more places and exposing sysfs interface in separate patch. * Moved extending X86 ARCHITECTURE MAINTAINERS earlier in series (Dan) * Removed "default n" for GENERIC_LIB_X86 (Dan) * Added vendor prefix for peci-aspeed specific properties (Rob) * Refactored PECI to use devres consistently (Dan) * Added missing sysfs documentation and excluded adding peci-sysfs to separate patch (Dan) * Used module_init() instead of subsys_init() for peci module initialization (Dan) * Removed redundant struct peci_device member (Dan) * Improved PECI Kconfig help (Randy/Dan) * Fixed/removed log messages (Dan, Guenter) * Refactored peci-cputemp and peci-dimmtemp and added missing locks (Guenter) * Removed unused dev_set_drvdata() in peci-cputemp and peci-dimmtemp (Guenter) * Fixed used types, names, fixed broken and added additional comments to peci-hwmon (Guenter, Zev) * Refactored peci-dimmtemp to not return -ETIMEDOUT (Guenter) * Added sanity check for min_peci_revision in peci-hwmon drivers (Zev) * Added assert for DIMM_NUMS_MAX and additional warning in peci-dimmtemp (Zev) * Fixed macro names in peci-aspeed (Zev) * Refactored peci-aspeed sanitizing properties to a single helper function (Zev) * Fixed peci_cpu_device_ids definition for Broadwell Xeon D (David) * Refactor peci_request to use a single allocation (Zev) * Used min_t() to improve code readability (Zev) * Added macro for PECI_RDENDPTCFG_MMIO_WR_LEN_BASE and fixed adev type array name to more descriptive (Zev) * Fixed peci-hwmon commit-msg and documentation (Zev) Thanks -Iwona Iwona Winiarska (11): dt-bindings: Add generic bindings for PECI dt-bindings: Add bindings for peci-aspeed ARM: dts: aspeed: Add PECI controller nodes peci: Add core infrastructure peci: Add device detection peci: Add sysfs interface for PECI bus peci: Add support for PECI device drivers peci: Add peci-cpu driver hwmon: peci: Add cputemp driver hwmon: peci: Add dimmtemp driver docs: Add PECI documentation Jae Hyun Yoo (2): peci: Add peci-aspeed controller driver docs: hwmon: Document PECI drivers Documentation/ABI/testing/sysfs-bus-peci | 16 + .../devicetree/bindings/peci/peci-aspeed.yaml | 72 ++ .../bindings/peci/peci-controller.yaml | 33 + Documentation/hwmon/index.rst | 2 + Documentation/hwmon/peci-cputemp.rst | 90 +++ Documentation/hwmon/peci-dimmtemp.rst | 57 ++ Documentation/index.rst | 1 + Documentation/peci/index.rst | 16 + Documentation/peci/peci.rst | 51 ++ MAINTAINERS | 26 + arch/arm/boot/dts/aspeed-g4.dtsi | 11 + arch/arm/boot/dts/aspeed-g5.dtsi | 11 + arch/arm/boot/dts/aspeed-g6.dtsi | 11 + drivers/Kconfig | 3 + drivers/Makefile | 1 + drivers/hwmon/Kconfig | 2 + drivers/hwmon/Makefile | 1 + drivers/hwmon/peci/Kconfig | 31 + drivers/hwmon/peci/Makefile | 7 + drivers/hwmon/peci/common.h | 58 ++ drivers/hwmon/peci/cputemp.c | 592 ++++++++++++++++ drivers/hwmon/peci/dimmtemp.c | 630 ++++++++++++++++++ drivers/peci/Kconfig | 36 + drivers/peci/Makefile | 10 + drivers/peci/controller/Kconfig | 18 + drivers/peci/controller/Makefile | 3 + drivers/peci/controller/peci-aspeed.c | 599 +++++++++++++++++ drivers/peci/core.c | 236 +++++++ drivers/peci/cpu.c | 343 ++++++++++ drivers/peci/device.c | 252 +++++++ drivers/peci/internal.h | 136 ++++ drivers/peci/request.c | 482 ++++++++++++++ drivers/peci/sysfs.c | 82 +++ include/linux/peci-cpu.h | 40 ++ include/linux/peci.h | 112 ++++ 35 files changed, 4071 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-peci create mode 100644 Documentation/devicetree/bindings/peci/peci-aspeed.yaml create mode 100644 Documentation/devicetree/bindings/peci/peci-controller.yaml create mode 100644 Documentation/hwmon/peci-cputemp.rst create mode 100644 Documentation/hwmon/peci-dimmtemp.rst create mode 100644 Documentation/peci/index.rst create mode 100644 Documentation/peci/peci.rst create mode 100644 drivers/hwmon/peci/Kconfig create mode 100644 drivers/hwmon/peci/Makefile create mode 100644 drivers/hwmon/peci/common.h create mode 100644 drivers/hwmon/peci/cputemp.c create mode 100644 drivers/hwmon/peci/dimmtemp.c create mode 100644 drivers/peci/Kconfig create mode 100644 drivers/peci/Makefile create mode 100644 drivers/peci/controller/Kconfig create mode 100644 drivers/peci/controller/Makefile create mode 100644 drivers/peci/controller/peci-aspeed.c create mode 100644 drivers/peci/core.c create mode 100644 drivers/peci/cpu.c create mode 100644 drivers/peci/device.c create mode 100644 drivers/peci/internal.h create mode 100644 drivers/peci/request.c create mode 100644 drivers/peci/sysfs.c create mode 100644 include/linux/peci-cpu.h create mode 100644 include/linux/peci.h -- 2.34.1
