Re: [PATCH] media: i2c: mt9p031: add OF support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, May 26, 2013 at 06:38:54PM +0530, Prabhakar Lad wrote:
> From: Lad, Prabhakar <prabhakar.csengg@xxxxxxxxx>
> 
> add OF support for the mt9p031 sensor driver.
> Alongside this patch sorts the header inclusion alphabetically.
> 
> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@xxxxxxxxx>
> Cc: Hans Verkuil <hans.verkuil@xxxxxxxxx>
> Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> Cc: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
> Cc: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
> Cc: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
> Cc: Sakari Ailus <sakari.ailus@xxxxxx>
> Cc: Grant Likely <grant.likely@xxxxxxxxxxxx>
> Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> Cc: Rob Herring <rob.herring@xxxxxxxxxxx>
> Cc: Rob Landley <rob@xxxxxxxxxxx>
> Cc: Arnd Bergmann <arnd@xxxxxxxx>
> Cc: devicetree-discuss@xxxxxxxxxxxxxxxx
> Cc: davinci-linux-open-source@xxxxxxxxxxxxxxxxxxxx
> Cc: linux-doc@xxxxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx

Reviewed-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>

Sascha

> ---
>  Changes for NON RFC v1:
>  1: added missing call for of_node_put().
>  
>  Changes for RFC v4 (https://patchwork.kernel.org/patch/2556251/):
>  1: Renamed "gpio-reset" property to "reset-gpios".
>  2: Dropped assigning the driver data from the of node.
> 
>  Changes for RFC v3(https://patchwork.kernel.org/patch/2515921/):
>  1: Dropped check if gpio-reset is valid.
>  2: Fixed some code nits.
>  3: Included a reference to the V4L2 DT bindings documentation.
> 
>  Changes for RFC v2 (https://patchwork.kernel.org/patch/2510201/):
>  1: Used '-' instead of '_' for device properties.
>  2: Specified gpio reset pin as phandle in device node.
>  3: Handle platform data properly even if kernel is compiled with
>     devicetree support.
>  4: Used dev_* for messages in drivers instead of pr_*.
>  5: Changed compatible property to "aptina,mt9p031" and "aptina,mt9p031m".
>  6: Sorted the header inclusion alphabetically and fixed some minor code nits.
>  
>  RFC v1: https://patchwork.kernel.org/patch/2498791/
>  
>  .../devicetree/bindings/media/i2c/mt9p031.txt      |   40 ++++++++++++++++++
>  drivers/media/i2c/mt9p031.c                        |   43 +++++++++++++++++++-
>  2 files changed, 81 insertions(+), 2 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/mt9p031.txt
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
> new file mode 100644
> index 0000000..59d613c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
> @@ -0,0 +1,40 @@
> +* Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor
> +
> +The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image sensor with
> +an active array size of 2592H x 1944V. It is programmable through a simple
> +two-wire serial interface.
> +
> +Required Properties :
> +- compatible : value should be either one among the following
> +	(a) "aptina,mt9p031" for mt9p031 sensor
> +	(b) "aptina,mt9p031m" for mt9p031m sensor
> +
> +- input-clock-frequency : Input clock frequency.
> +
> +- pixel-clock-frequency : Pixel clock frequency.
> +
> +Optional Properties :
> +- reset-gpios: Chip reset GPIO
> +
> +For further reading of port node refer Documentation/devicetree/bindings/media/
> +video-interfaces.txt.
> +
> +Example:
> +
> +	i2c0@1c22000 {
> +		...
> +		...
> +		mt9p031@5d {
> +			compatible = "aptina,mt9p031";
> +			reg = <0x5d>;
> +			reset-gpios = <&gpio3 30 0>;
> +
> +			port {
> +				mt9p031_1: endpoint {
> +					input-clock-frequency = <6000000>;
> +					pixel-clock-frequency = <96000000>;
> +				};
> +			};
> +		};
> +		...
> +	};
> diff --git a/drivers/media/i2c/mt9p031.c b/drivers/media/i2c/mt9p031.c
> index bf49899..bb1f993 100644
> --- a/drivers/media/i2c/mt9p031.c
> +++ b/drivers/media/i2c/mt9p031.c
> @@ -16,9 +16,10 @@
>  #include <linux/delay.h>
>  #include <linux/device.h>
>  #include <linux/gpio.h>
> -#include <linux/module.h>
>  #include <linux/i2c.h>
>  #include <linux/log2.h>
> +#include <linux/module.h>
> +#include <linux/of_gpio.h>
>  #include <linux/pm.h>
>  #include <linux/regulator/consumer.h>
>  #include <linux/slab.h>
> @@ -28,6 +29,7 @@
>  #include <media/v4l2-chip-ident.h>
>  #include <media/v4l2-ctrls.h>
>  #include <media/v4l2-device.h>
> +#include <media/v4l2-of.h>
>  #include <media/v4l2-subdev.h>
>  
>  #include "aptina-pll.h"
> @@ -928,10 +930,37 @@ static const struct v4l2_subdev_internal_ops mt9p031_subdev_internal_ops = {
>   * Driver initialization and probing
>   */
>  
> +static struct mt9p031_platform_data *
> +mt9p031_get_pdata(struct i2c_client *client)
> +{
> +	struct mt9p031_platform_data *pdata = NULL;
> +	struct device_node *np;
> +
> +	if (!IS_ENABLED(CONFIG_OF) || !client->dev.of_node)
> +		return client->dev.platform_data;
> +
> +	np = v4l2_of_get_next_endpoint(client->dev.of_node, NULL);
> +	if (!np)
> +		return NULL;
> +
> +	pdata = devm_kzalloc(&client->dev, sizeof(struct mt9p031_platform_data),
> +			     GFP_KERNEL);
> +	if (!pdata)
> +		goto done;
> +
> +	pdata->reset = of_get_named_gpio(client->dev.of_node, "reset-gpios", 0);
> +	of_property_read_u32(np, "input-clock-frequency", &pdata->ext_freq);
> +	of_property_read_u32(np, "pixel-clock-frequency", &pdata->target_freq);
> +
> +done:
> +	of_node_put(np);
> +	return pdata;
> +}
> +
>  static int mt9p031_probe(struct i2c_client *client,
>  			 const struct i2c_device_id *did)
>  {
> -	struct mt9p031_platform_data *pdata = client->dev.platform_data;
> +	struct mt9p031_platform_data *pdata = mt9p031_get_pdata(client);
>  	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
>  	struct mt9p031 *mt9p031;
>  	unsigned int i;
> @@ -1070,8 +1099,18 @@ static const struct i2c_device_id mt9p031_id[] = {
>  };
>  MODULE_DEVICE_TABLE(i2c, mt9p031_id);
>  
> +#if IS_ENABLED(CONFIG_OF)
> +static const struct of_device_id mt9p031_of_match[] = {
> +	{ .compatible = "aptina,mt9p031", },
> +	{ .compatible = "aptina,mt9p031m", },
> +	{ /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, mt9p031_of_match);
> +#endif
> +
>  static struct i2c_driver mt9p031_i2c_driver = {
>  	.driver = {
> +		.of_match_table = of_match_ptr(mt9p031_of_match),
>  		.name = "mt9p031",
>  	},
>  	.probe          = mt9p031_probe,
> -- 
> 1.7.0.4
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux