Hi Kishon, I have some comment about this patch and upload modified patch to following repository (extcon-for-palmas). - http://git.kernel.org/cgit/linux/kernel/git/chanwoo/extcon.git/commit/?h=extcon-for-palmas&id=f2b7cb80699cbe1a5fd6c97ef2c600915f8d7f2c This patchset include patch related to other module ,so I need your opinion to apply this patchset to git repository. On 05/24/2013 11:31 PM, Kishon Vijay Abraham I wrote: > From: Graeme Gregory <gg@xxxxxxxxxxxxxxx> > > This is the driver for the USB comparator built into the palmas chip. It > handles the various USB OTG events that can be generated by cable > insertion/removal. > > Signed-off-by: Graeme Gregory <gg@xxxxxxxxxxxxxxx> > Signed-off-by: Moiz Sonasath <m-sonasath@xxxxxx> > Signed-off-by: Ruchika Kharwar <ruchika@xxxxxx> > Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx> > Signed-off-by: George Cherian <george.cherian@xxxxxx> > [kishon@xxxxxx: adapted palmas usb driver to use the extcon framework] > Signed-off-by: Sebastien Guiriec <s-guiriec@xxxxxx> > --- > Changes from v4: > * removed no_control_vbus property (to be used if the platform wants to use > its own vbus control. > * removed unnecessary headers > * moved the palmas_usb_state to palmas.h > * misc cleanups > *A checkpatch warning "WARNING: static const char * array should > probably be static const char * const"is ignored since it introduces a > compilation warning. > Changes from v3: > * adapted the driver to extcon framework (so moved to drivers/extcon) > * removed palmas_usb_(write/read) and replaced all calls with > palmas_(read/write). > * ignored a checkpatch warning in the line > static const char *palmas_extcon_cable[] = { > as it seemed to be incorrect? > * removed all references to OMAP in this driver. > * couldn't test this driver with mainline as omap5 panda is not booting > with mainline. > * A comment to change to platform_get_irq from regmap is not done as I felt > the data should come from regmap in this case. Graeme? > Changes from v2: > * Moved the driver to drivers/usb/phy/ > * Added a bit more explanation in Kconfig > .../devicetree/bindings/extcon/extcon-twl.txt | 16 + > drivers/extcon/Kconfig | 7 + > drivers/extcon/Makefile | 1 + > drivers/extcon/extcon-palmas.c | 341 +++++++++++++++++++++ > include/linux/mfd/palmas.h | 25 +- > 5 files changed, 380 insertions(+), 10 deletions(-) > create mode 100644 Documentation/devicetree/bindings/extcon/extcon-twl.txt > create mode 100644 drivers/extcon/extcon-palmas.c > > diff --git a/Documentation/devicetree/bindings/extcon/extcon-twl.txt b/Documentation/devicetree/bindings/extcon/extcon-twl.txt > new file mode 100644 > index 0000000..8ffdeed > --- /dev/null > +++ b/Documentation/devicetree/bindings/extcon/extcon-twl.txt > @@ -0,0 +1,15 @@ > +EXTCON FOR TWL CHIPS > + > +PALMAS USB COMPARATOR > +Required Properties: > + - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" > + - vbus-supply : phandle to the regulator device tree node. > + > +Optional Properties: > + - ti,wakeup : To enable the wakeup comparator in probe > + > +palmas-usb { > + compatible = "ti,twl6035-usb", "ti,palmas-usb"; > + vbus-supply = <&smps10_reg>; > + ti,wakeup; > +}; > diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig > index 3297301..63f454e 100644 > --- a/drivers/extcon/Kconfig > +++ b/drivers/extcon/Kconfig > @@ -53,4 +53,11 @@ config EXTCON_ARIZONA > with Wolfson Arizona devices. These are audio CODECs with > advanced audio accessory detection support. > > +config EXTCON_PALMAS > + tristate "Palmas USB EXTCON support" > + depends on MFD_PALMAS You should add REGULATOR_PALMAS dependency because palmas_set_switch_smps10() is defined in palmas regulator driver. + depends on MFD_PALMAS && REGULATOR_PALMAS > + help > + Say Y here to enable support for USB peripheral and USB host > + detection by palmas usb. > + > endif # MULTISTATE_SWITCH > diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile > index f98a3c4..540e2c3 100644 > --- a/drivers/extcon/Makefile > +++ b/drivers/extcon/Makefile > @@ -8,3 +8,4 @@ obj-$(CONFIG_EXTCON_ADC_JACK) += extcon-adc-jack.o > obj-$(CONFIG_EXTCON_MAX77693) += extcon-max77693.o > obj-$(CONFIG_EXTCON_MAX8997) += extcon-max8997.o > obj-$(CONFIG_EXTCON_ARIZONA) += extcon-arizona.o > +obj-$(CONFIG_EXTCON_PALMAS) += extcon-palmas.o > diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c > new file mode 100644 > index 0000000..9e613e9 > --- /dev/null > +++ b/drivers/extcon/extcon-palmas.c > @@ -0,0 +1,341 @@ > +/* > + * Palmas USB transceiver driver > + * > + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * Author: Graeme Gregory <gg@xxxxxxxxxxxxxxx> > + * Author: Kishon Vijay Abraham I <kishon@xxxxxx> > + * > + * Based on twl6030_usb.c > + * > + * Author: Hema HK <hemahk@xxxxxx> > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include <linux/module.h> > +#include <linux/interrupt.h> > +#include <linux/platform_device.h> > +#include <linux/usb/phy_companion.h> > +#include <linux/err.h> > +#include <linux/mfd/palmas.h> > +#include <linux/of.h> > +#include <linux/of_platform.h> > + > +static const char *palmas_extcon_cable[] = { > + [0] = "USB", > + [1] = "USB-HOST", > + NULL, > +}; > + > +static const int mutually_exclusive[] = {0x3, 0x0}; > + > +static void palmas_usb_wakeup(struct palmas *palmas, int enable) > +{ > + if (enable) > + palmas_write(palmas, PALMAS_USB_OTG_BASE, PALMAS_USB_WAKEUP, > + PALMAS_USB_WAKEUP_ID_WK_UP_COMP); > + else > + palmas_write(palmas, PALMAS_USB_OTG_BASE, PALMAS_USB_WAKEUP, 0); > +} > + > +static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb) > +{ > + int ret; > + struct palmas_usb *palmas_usb = _palmas_usb; > + unsigned int vbus_line_state; > + > + palmas_read(palmas_usb->palmas, PALMAS_INTERRUPT_BASE, > + PALMAS_INT3_LINE_STATE, &vbus_line_state); > + > + if (vbus_line_state & PALMAS_INT3_LINE_STATE_VBUS) { > + if (palmas_usb->linkstat != PALMAS_USB_STATE_VBUS) { > + if (palmas_usb->vbus_reg) { > + ret = regulator_enable(palmas_usb->vbus_reg); > + if (ret) { > + dev_dbg(palmas_usb->dev, > + "regulator enable failed\n"); > + goto ret0; I prefer to use consistent name of goto statement becuase you use 'fail_' prefix in palmas_usb_probe() - goto ret0; + goto fail; > + } > + } > + palmas_usb->linkstat = PALMAS_USB_STATE_VBUS; > + extcon_set_cable_state(&palmas_usb->edev, "USB", true); > + } else { > + dev_dbg(palmas_usb->dev, > + "Spurious connect event detected\n"); > + } > + } else if (!(vbus_line_state & PALMAS_INT3_LINE_STATE_VBUS)) { > + if (palmas_usb->linkstat == PALMAS_USB_STATE_VBUS) { > + if (palmas_usb->vbus_reg) > + regulator_disable(palmas_usb->vbus_reg); > + palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT; > + extcon_set_cable_state(&palmas_usb->edev, "USB", false); > + } else { > + dev_dbg(palmas_usb->dev, > + "Spurious disconnect event detected\n"); > + } > + } > + > +ret0: ditto. -ret0: +fail: > + return IRQ_HANDLED; > +} > + > +static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb) > +{ > + int ret; > + unsigned int set; > + struct palmas_usb *palmas_usb = _palmas_usb; You should use space instead of tab when defined local variables. + int ret; + unsigned int set; + struct palmas_usb *palmas_usb = _palmas_usb; > + > + palmas_read(palmas_usb->palmas, PALMAS_USB_OTG_BASE, > + PALMAS_USB_ID_INT_LATCH_SET, &set); > + > + if (set & PALMAS_USB_ID_INT_SRC_ID_GND) { > + palmas_set_switch_smps10(palmas_usb->palmas, 1); > + if (palmas_usb->vbus_reg) { > + ret = regulator_enable(palmas_usb->vbus_reg); > + if (ret) { > + dev_dbg(palmas_usb->dev, > + "regulator enable failed\n"); > + goto ret0; ditto. > + } > + } > + palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE, > + PALMAS_USB_ID_INT_EN_HI_SET, > + PALMAS_USB_ID_INT_EN_HI_SET_ID_FLOAT); > + palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE, > + PALMAS_USB_ID_INT_EN_HI_CLR, > + PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND); > + palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE, > + PALMAS_USB_ID_INT_LATCH_CLR, > + PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND); > + palmas_usb->linkstat = PALMAS_USB_STATE_ID; > + extcon_set_cable_state(&palmas_usb->edev, "USB-HOST", true); > + } else if (set & PALMAS_USB_ID_INT_SRC_ID_FLOAT) { > + palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE, > + PALMAS_USB_ID_INT_EN_HI_SET, > + PALMAS_USB_ID_INT_EN_HI_SET_ID_GND); > + palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE, > + PALMAS_USB_ID_INT_EN_HI_CLR, > + PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT); > + palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE, > + PALMAS_USB_ID_INT_LATCH_CLR, > + PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT); > + if (palmas_usb->vbus_reg) > + regulator_disable(palmas_usb->vbus_reg); > + palmas_set_switch_smps10(palmas_usb->palmas, 0); > + palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT; > + extcon_set_cable_state(&palmas_usb->edev, "USB-HOST", false); > + } > + > +ret0: ditto. > + return IRQ_HANDLED; > +} > + > +static void palmas_enable_irq(struct palmas_usb *palmas_usb) > +{ > + palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE, > + PALMAS_USB_VBUS_CTRL_SET, > + PALMAS_USB_VBUS_CTRL_SET_VBUS_ACT_COMP); > + > + palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE, > + PALMAS_USB_ID_CTRL_SET, PALMAS_USB_ID_CTRL_SET_ID_ACT_COMP); > + > + palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE, > + PALMAS_USB_ID_INT_EN_HI_SET, > + PALMAS_USB_ID_INT_EN_HI_SET_ID_GND); > + > + palmas_vbus_irq_handler(palmas_usb->vbus_irq, palmas_usb); > + > + /* cold plug for host mode needs this delay */ > + msleep(30); > + palmas_id_irq_handler(palmas_usb->id_irq, palmas_usb); > +} > + > +static void palmas_set_vbus_work(struct work_struct *data) > +{ > + int ret; > + struct palmas_usb *palmas_usb = container_of(data, struct palmas_usb, > + set_vbus_work); > + > + /* > + * Start driving VBUS. Set OPA_MODE bit in CHARGERUSB_CTRL1 > + * register. This enables boost mode. > + */ > + > + if (palmas_usb->vbus_enable) { > + ret = regulator_enable(palmas_usb->vbus_reg); > + if (ret) > + dev_dbg(palmas_usb->dev, "regulator enable failed\n"); > + } else { > + regulator_disable(palmas_usb->vbus_reg); > + } > +} > + > +static int palmas_set_vbus(struct phy_companion *comparator, bool enabled) > +{ > + struct palmas_usb *palmas_usb = comparator_to_palmas(comparator); > + > + palmas_usb->vbus_enable = enabled; > + schedule_work(&palmas_usb->set_vbus_work); > + > + return 0; > +} > + > +static int palmas_start_srp(struct phy_companion *comparator) > +{ > + struct palmas_usb *palmas_usb = comparator_to_palmas(comparator); > + > + palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE, > + PALMAS_USB_VBUS_CTRL_SET, PALMAS_USB_VBUS_CTRL_SET_VBUS_DISCHRG > + | PALMAS_USB_VBUS_CTRL_SET_VBUS_IADP_SINK); > + palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE, > + PALMAS_USB_VBUS_CTRL_SET, > + PALMAS_USB_VBUS_CTRL_SET_VBUS_CHRG_VSYS | > + PALMAS_USB_VBUS_CTRL_SET_VBUS_IADP_SINK); > + > + msleep(100); > + > + palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE, > + PALMAS_USB_VBUS_CTRL_CLR, > + PALMAS_USB_VBUS_CTRL_SET_VBUS_CHRG_VSYS | > + PALMAS_USB_VBUS_CTRL_SET_VBUS_CHRG_VSYS); > + > + return 0; > +} > + > +static int palmas_usb_probe(struct platform_device *pdev) > +{ > + struct palmas *palmas = dev_get_drvdata(pdev->dev.parent); > + struct palmas_usb_platform_data *pdata = pdev->dev.platform_data; > + struct device_node *node = pdev->dev.of_node; > + struct palmas_usb *palmas_usb; > + int status; > + > + if (node && !pdata) { > + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); > + > + if (!pdata) > + return -ENOMEM; > + > + pdata->wakeup = of_property_read_bool(node, "ti,wakeup"); > + } > + > + if (!pdata) > + return -EINVAL; I think that if condition of first if statement is true, second if statement is unnecessary. So, I prefer to modify if/else statement as following: + } else if (!pdata) { return -EINVAL; + } > + > + palmas_usb = devm_kzalloc(&pdev->dev, sizeof(*palmas_usb), GFP_KERNEL); > + if (!palmas_usb) > + return -ENOMEM; > + > + palmas->usb = palmas_usb; > + palmas_usb->palmas = palmas; > + > + palmas_usb->dev = &pdev->dev; You should use space instead of tab when assign some value to variables. + palmas->usb = palmas_usb; + palmas_usb->palmas = palmas; + + palmas_usb->dev= &pdev->dev; > + > + palmas_usb->id_otg_irq = regmap_irq_get_virq(palmas->irq_data, > + PALMAS_ID_OTG_IRQ); > + palmas_usb->id_irq = regmap_irq_get_virq(palmas->irq_data, > + PALMAS_ID_IRQ); > + palmas_usb->vbus_otg_irq = regmap_irq_get_virq(palmas->irq_data, > + PALMAS_VBUS_OTG_IRQ); > + palmas_usb->vbus_irq = regmap_irq_get_virq(palmas->irq_data, > + PALMAS_VBUS_IRQ); > + > + palmas_usb->comparator.set_vbus = palmas_set_vbus; > + palmas_usb->comparator.start_srp = palmas_start_srp; > + > + palmas_usb_wakeup(palmas, pdata->wakeup); > + > + palmas_usb->vbus_reg = devm_regulator_get(&pdev->dev, "vbus"); > + if (IS_ERR(palmas_usb->vbus_reg)) { > + dev_err(&pdev->dev, "vbus init failed\n"); > + return PTR_ERR(palmas_usb->vbus_reg); > + } > + > + INIT_WORK(&palmas_usb->set_vbus_work, palmas_set_vbus_work); > + > + platform_set_drvdata(pdev, palmas_usb); > + > + palmas_usb->edev.name = "palmas-usb"; > + palmas_usb->edev.supported_cable = palmas_extcon_cable; > + palmas_usb->edev.mutually_exclusive = mutually_exclusive; > + > + status = extcon_dev_register(&palmas_usb->edev, palmas_usb->dev); > + if (status) { > + dev_err(&pdev->dev, "failed to register extcon device\n"); > + goto fail_irq; > + } > + > + status = devm_request_threaded_irq(palmas_usb->dev, palmas_usb->id_irq, > + NULL, palmas_id_irq_handler, > + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, > + "palmas_usb_id", palmas_usb); > + if (status < 0) { > + dev_err(&pdev->dev, "can't get IRQ %d, err %d\n", > + palmas_usb->id_irq, status); > + goto fail_extcon; > + } > + > + status = devm_request_threaded_irq(palmas_usb->dev, > + palmas_usb->vbus_irq, NULL, palmas_vbus_irq_handler, > + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, > + "palmas_usb_vbus", palmas_usb); > + if (status < 0) { > + dev_err(&pdev->dev, "can't get IRQ %d, err %d\n", > + palmas_usb->vbus_irq, status); > + goto fail_extcon; > + } > + > + palmas_enable_irq(palmas_usb); > + > + return 0; > + > +fail_extcon: > + extcon_dev_unregister(&palmas_usb->edev); > + > +fail_irq: > + cancel_work_sync(&palmas_usb->set_vbus_work); > + > + return status; > +} > + > +static int palmas_usb_remove(struct platform_device *pdev) > +{ > + struct palmas_usb *palmas_usb = platform_get_drvdata(pdev); > + > + cancel_work_sync(&palmas_usb->set_vbus_work); > + extcon_dev_unregister(&palmas_usb->edev); > + > + return 0; > +} > + > +static struct of_device_id of_palmas_match_tbl[] = { > + { .compatible = "ti,palmas-usb", }, > + { .compatible = "ti,twl6035-usb", }, > + { /* end */ } > +}; > + > +static struct platform_driver palmas_usb_driver = { > + .probe = palmas_usb_probe, > + .remove = palmas_usb_remove, > + .driver = { > + .name = "palmas-usb", > + .of_match_table = of_palmas_match_tbl, > + .owner = THIS_MODULE, > + }, > +}; > + > +module_platform_driver(palmas_usb_driver); > + > +MODULE_ALIAS("platform:palmas-usb"); > +MODULE_AUTHOR("Graeme Gregory <gg@xxxxxxxxxxxxxxx>"); > +MODULE_DESCRIPTION("Palmas USB transceiver driver"); > +MODULE_LICENSE("GPL"); > +MODULE_DEVICE_TABLE(of, of_palmas_match_tbl); > diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h > index 6df375d..eb4846b 100644 > --- a/include/linux/mfd/palmas.h > +++ b/include/linux/mfd/palmas.h > @@ -20,6 +20,8 @@ > #include <linux/leds.h> > #include <linux/regmap.h> > #include <linux/regulator/driver.h> > +#include <linux/extcon.h> > +#include <linux/usb/phy_companion.h> > > #define PALMAS_NUM_CLIENTS 3 > > @@ -37,6 +39,12 @@ struct palmas_gpadc; > struct palmas_resource; > struct palmas_usb; > > +enum palmas_usb_state { > + PALMAS_USB_STATE_DISCONNECT, > + PALMAS_USB_STATE_VBUS, > + PALMAS_USB_STATE_ID, > +}; > + > struct palmas { > struct device *dev; > > @@ -180,9 +188,6 @@ struct palmas_pmic_platform_data { > }; > > struct palmas_usb_platform_data { > - /* Set this if platform wishes its own vbus control */ > - int no_control_vbus; > - > /* Do we enable the wakeup comparator on probe */ > int wakeup; > }; > @@ -350,22 +355,22 @@ struct palmas_usb { > struct palmas *palmas; > struct device *dev; > > - /* for vbus reporting with irqs disabled */ > - spinlock_t lock; > + struct extcon_dev edev; > + struct phy_companion comparator; > > struct regulator *vbus_reg; > > /* used to set vbus, in atomic path */ > struct work_struct set_vbus_work; > > - int irq1; > - int irq2; > - int irq3; > - int irq4; > + int id_otg_irq; > + int id_irq; > + int vbus_otg_irq; > + int vbus_irq; > > int vbus_enable; > > - u8 linkstat; > + enum palmas_usb_state linkstat; > }; > > #define comparator_to_palmas(x) container_of((x), struct palmas_usb, comparator) -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html