Hi, I found a very obvious bug in v3 after I posted it. Thus, I decided to post a v4 fixing it. It only impacts Patch 4. Please see the change log for details. You can find v1, v2, and v3 in [1], [2], and [3], respectively. The Intel Hardware Feedback Interface (HFI) [4] provides information about the performance and energy efficiency of each CPU in the system. It uses a table that is shared between hardware and the operating system. The contents of the table may be updated as a result of changes in the operating conditions of the system (e.g., reaching a thermal limit) or the action of external factors (e.g., changes in the thermal design power). The information that HFI provides are specified as numeric, unit-less capabilities relative to other CPUs in the system. These capabilities have a range of [0-255] where higher numbers represent higher capabilities. Energy efficiency and performance are reported in separate capabilities. If either the performance or energy capabilities efficiency of a CPU are 0, the hardware recommends to not schedule any tasks on such CPU for performance, energy efficiency or thermal reasons, respectively. The kernel or user space may use the information from the HFI to modify task placement and/or adjust power limits. This patchset focuses on the user space. The thermal notification framework is extended to relay updates of CPU capacity. Thus, a userspace daemon can affinitize workloads to certain CPUs and/or offline CPUs whose capabilities are zero. The frequency of HFI updates is specific to each processor model. On some systems, there is just a single HFI update at boot. On other systems, there may be updates every tens of milliseconds. In order to not overwhelm userspace with too many updates, they are limited to one update every CONFIG_HZ jiffies. Thanks and BR, Ricardo [1]. https://lore.kernel.org/lkml/20211106013312.26698-1-ricardo.neri-calderon@xxxxxxxxxxxxxxx/ [2]. https://lore.kernel.org/lkml/20211220151438.1196-1-ricardo.neri-calderon@xxxxxxxxxxxxxxx/ [3]. https://lore.kernel.org/lkml/20220106025059.25847-8-ricardo.neri-calderon@xxxxxxxxxxxxxxx/ [4]. https://www.intel.com/sdm Changes since v3: ++ Unchanged patches: 1, 2, 3, 5, 6, 7. * Corrected bug when initializing a CPU's HFI instance in intel_hfi_online(). (Patch 4) Changes since v2: ++ Unchanged patches: 1, 6, 7. * Replaced subject prefix to be "x86/cpu:". (Patch 2; Boris) * Rename the INTEL_HFI Kconfig option as INTEL_HFI_THERMAL to reflect better the nature of the feature. (Patch 3; Rafael) * Removed hfi_instance::initialized. Instead, use hfi_instance:: hdr to determine if the instance has been initialized. (Patch 4; Rafael) * Renamed hfi_lock as hfi_instance_lock to reflect the fact that it is used to protect accesses to HFI instances. (Patch 4; Rafael) * Removed unnecessary locking when linking a CPU to an HFI instance in intel_hfi_online(). (Patch 4; Rafael) * Unconditionally link the hfi_instance of a package/die to CPUs in the same package in intel_hfi_online(). Initialization is taken care of separately. (Patch 4) * Improved locking in error paths in intel_hfi_online(). (Patch 4; Rafael) * Removed a pointless check for NULL when taking a pointer of an element of hfi_instances. (Patch 4) * Added missing #include files. (Patches 3, 4, 5) Changes since v1: ++ Unchanged patches: none * Clarified that HFI capabilities are independent. (Patch 1; Daniel) * Provided examples on changes reflected in the HFI table. (Patch 1; Daniel) * Renamed X86_FEATURE_INTEL_HFI as X86_FEATURE_HFI. (Patch 2, 3, 4, 5; Boris) * Reworked parsing of HFI features using bitfields instead of bitmasks. (Patch 3; PeterZ). * Removed hfi_instance::parsed. (Patch 3; Rafael) * Converted pr_err() to pr_debug(). (Patch 3; Srinivas, Rafael) * Removed unnecessary dependency on CONFIG_SCHED_MC. (Patch 3) * Renamed hfi_instance::ts_counter as hfi_instance::timestamp. (Patch 3) * Renamed hfi_instance::table_base as hfi_instance::local_table and relocated its definition to this patch. (Patch 3) * Wrapped hfi_instance::timestamp and hfi_instance:local_table in an anonymous union, since both point at the same location. (Patch 3) * Relocated definitions of MSR bits from intel_hfi.h to intel_hfi.c. (Patch 4) * Renamed HFI_PTR_VALID_BIT as HW_FEEDBACK_PTR_VALID_BIT for clarity. (Patch 4). * Reworked init_hfi_cpu_index() to take a pointer of type struct hfi_cpu_info. (Patch 4; Rafael) * In intel_hfi_online(), check for null hfi_instances and improve checks of the die_id. (Patch 4; Rafael) * Use a local cpumask_var_t to keep track of the CPUs of each hfi_instance. (Patch 4; Rafael) * Removed hfi_instance::die_id. It is not used anywhere. (Patch 4) * Renamed hfi_instance::table_base as hfi_instance::local_table for clarity. (Patch 4) * Repurposed hfi_instance::event_lock to handle HFI interrupt events to avoid keeping CPUs spinning needlessly. Added a new hfi_instance::table_lock to serialize access to an HFI table. (Patch 5; PeterZ) * Replaced raw_spin_[un]lock[restore|save]() with raw_spin_[un]lock(). intel_hfi_process_event() runs in interrupt context and hence there is no need to save interrupt flags. (Patch 5) * Renamed HFI_CONFIG_ENABLE_BIT as HW_FEEDBACK_CONFIG_HFI_ENABLE_BIT for clarity. (Patch 5) * Relaxed checks on timestamp to allow time wrap around. (Patch 5) * Reworded the members of struct cpu_capacity for clarity. (Patch 6; Lukasz) * Defined the CPU capability attributes to be scaled in the [0, 1023] interval. (Patch 6; Lukasz) * Made get_one_hfi_cap() return void. Removed unnecessary checks. (Patch 7; Rafael) * Replaced raw_spin_[un]lock_irq[restore|save]() with raw_spin_ [un]lock_irq() in get_one_hfi_cap(). This function is only called from a workqueue and there is no need to save and restore irq flags. * Scaled performance and energy efficiency values to a [0, 1023] interval when reporting values to user space via thermal netlink notifications. (Patch 7; Lucasz). Ricardo Neri (5): x86/Documentation: Describe the Intel Hardware Feedback Interface x86/cpu: Add definitions for the Intel Hardware Feedback Interface thermal: intel: hfi: Minimally initialize the Hardware Feedback Interface thermal: intel: hfi: Handle CPU hotplug events thermal: intel: hfi: Enable notification interrupt Srinivas Pandruvada (2): thermal: netlink: Add a new event to notify CPU capabilities change thermal: intel: hfi: Notify user space for HFI events Documentation/x86/index.rst | 1 + Documentation/x86/intel-hfi.rst | 72 ++++ arch/x86/include/asm/cpufeatures.h | 1 + arch/x86/include/asm/msr-index.h | 6 + drivers/thermal/intel/Kconfig | 13 + drivers/thermal/intel/Makefile | 1 + drivers/thermal/intel/intel_hfi.c | 543 ++++++++++++++++++++++++++++ drivers/thermal/intel/intel_hfi.h | 17 + drivers/thermal/intel/therm_throt.c | 21 ++ drivers/thermal/thermal_netlink.c | 55 +++ drivers/thermal/thermal_netlink.h | 13 + include/uapi/linux/thermal.h | 6 +- 12 files changed, 748 insertions(+), 1 deletion(-) create mode 100644 Documentation/x86/intel-hfi.rst create mode 100644 drivers/thermal/intel/intel_hfi.c create mode 100644 drivers/thermal/intel/intel_hfi.h -- 2.17.1
