Hi, Texas Instrument's OMAP Processor have a dedicated hardware module which is customised to operate with Power Management IC(PMIC) over an dedicated I2C. The communication involves a few SoC internal modules as follows: PMIC - The power management chip on the dedicated I2C (sometimes called I2C_SR) Voltage controller - consists of an hardware i2c controller and interface customized for PMICs. VC consists of multiple VC Channels, each channel representing a variable voltage rail supply to the SoC. Voltage Processor(VP) - controls the voltage requests to VC channel SmartReflex(Adaptive Voltage control) - (SR/AVS)- specialized hardware block which can dynamically control device voltage without software intervention. This module communicates with VP. In the simplest view, a simple voltage set operation is as follows: Vp->VC Channel -> VC -> PMIC Note, there may be dedicated PMIC per variable voltage rail OR PMICs which provide control for multiple SMPS supplying variable rails etc. In addition, there is an Adaptive Voltage Control (AVS) technique called SmartReflex which can operate (in a configuration called continous monitoring hardware loop or class 3 mode of operation), in which the SmartReflex block communicates with Voltage Processor. We have an OMAP specific implementation in arch/arm/mach-omap2 which does not tree VC/VP or PMIC as Linux devices, but as data which is configured as needed. In this series, we introduce replacement approach which has support for only Device Tree as OMAP is transitioning completely away from non-DT approach. As an overview, the following approach is taken. PMIC is now the regulator driver - generic omap-pmic-regulator (patch #1) Voltage controller and voltage controller channel is handled by driver/power/avs/omap_vc.c Voltage processor is handled by driver/power/avs/omap_vp.c Benefit of using drivers/power/avs is also to set the foundation to convert SmartReflex AVS into device tree based solution. (next stage). S/w dependency is as follows: Voltage controller <- Voltage Processor Voltage Processor registers with OMAP_PMIC it's controller operations OMAP_PMIC uses the controller operations to call vp which in turn calls VC to setup the communication chain. This allows us to maintain this as a module if needed as well (something our existing implementation was not capable of doing). The series is also available here: https://github.com/nmenon/linux-2.6-playground/commits/devel/vc-vp-regulator-rfc git://github.com/nmenon/linux-2.6-playground.git branch: devel/vc-vp-regulator-rfc This depends on a few patches for cpufreq/clock node i added in, merged with 3.10-rc2 master and a intermediate GPIO fix from Dan that I picked up available in branch devel/vc-vp-base Note: 1. AVS device tree conversion will have to depend on this due to dependency on VP 2. Clock node strategy used here is based on implementation I had posted here: http://marc.info/?t=136804008400001&r=1&w=2 3. I chose OMAP4460 based PandaBoard ES platform as my development platform and patch #4 in this series is an attempt to showcase how it will look like. Rationale: weird PMIC configuration was used in PandaBoard ES. Ability to handle that platform makes introduction to other platforms/SoCs trivial. example patch for 4430 sdp: http://pastebin.com/SkAGB273 4. Once this approach is agreed upon, I can do the dts changes for all SoCs OMAP3-5 and will post a formal series. Related defects: https://bugzilla.kernel.org/show_bug.cgi?id=58541 https://bugzilla.kernel.org/show_bug.cgi?id=58611 Nishanth Menon (4): regulator: Introduce OMAP regulator to control PMIC over VC/VP PM / AVS: Introduce support for OMAP Voltage Controller(VC) with device tree nodes PM / AVS: Introduce support for OMAP Voltage Processor(VP) with device tree nodes HACK: OMAP4460/TPS/TWL/PandaBoardES - Enable VP regulator for cpufreq .../devicetree/bindings/power/omap-vc.txt | 99 ++ .../devicetree/bindings/power/omap-vp.txt | 39 + .../bindings/regulator/omap-pmic-regulator.txt | 121 ++ arch/arm/boot/dts/omap4-panda-es.dts | 55 +- arch/arm/boot/dts/omap4.dtsi | 84 ++ arch/arm/boot/dts/omap4460.dtsi | 1 + arch/arm/boot/dts/tps62361.dtsi | 90 ++ arch/arm/boot/dts/twl6030.dtsi | 68 + drivers/power/avs/Kconfig | 15 + drivers/power/avs/Makefile | 20 + drivers/power/avs/omap_vc.c | 1508 ++++++++++++++++++++ drivers/power/avs/omap_vc.h | 67 + drivers/power/avs/omap_vp.c | 886 ++++++++++++ drivers/regulator/Kconfig | 12 + drivers/regulator/Makefile | 1 + drivers/regulator/omap-pmic-regulator.c | 554 +++++++ include/linux/regulator/omap-pmic-regulator.h | 147 ++ 17 files changed, 3763 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/power/omap-vc.txt create mode 100644 Documentation/devicetree/bindings/power/omap-vp.txt create mode 100644 Documentation/devicetree/bindings/regulator/omap-pmic-regulator.txt create mode 100644 arch/arm/boot/dts/tps62361.dtsi create mode 100644 drivers/power/avs/omap_vc.c create mode 100644 drivers/power/avs/omap_vc.h create mode 100644 drivers/power/avs/omap_vp.c create mode 100644 drivers/regulator/omap-pmic-regulator.c create mode 100644 include/linux/regulator/omap-pmic-regulator.h Regards, Nishanth Menon -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html