From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
When the hardware issues an HFI event, relay a notification to user space.
This allows user space to respond by reading performance and efficiency of
each CPU and take appropriate action.
For example, when performance and efficiency of a CPU is 0, user space can
either offline the CPU or inject idle. Also, if user space notices a
downward trend in performance, it may proactively adjust power limits to
avoid future situations in which performance drops to 0.
To avoid excessive notifications, the rate is limited by one HZ per event.
To limit the netlink message size, parameters for only 16 CPUs at max are
sent in one message. If there are more than 16 CPUs, issue as many messages
as needed to notify the status of all CPUs.
In the HFI specification, both performance and efficiency capabilities are
set in the [0, 255] range. The existing implementations of HFI hardware
do not scale the maximum values to 255. Since userspace cares about
capability values that are either 0 or show a downward/upward trend, this
fact does not matter much. Relative changes in capabilities are enough. To
comply with the thermal netlink ABI, scale both performance and efficiency
capabilities to the [0, 1023] interval.
Cc: Andi Kleen <ak@xxxxxxxxxxxxxxx>
Cc: Aubrey Li <aubrey.li@xxxxxxxxxxxxxxx>
Cc: Lukasz Luba <lukasz.luba@xxxxxxx>
Cc: Tim Chen <tim.c.chen@xxxxxxxxxxxxxxx>
Cc: "Ravi V. Shankar" <ravi.v.shankar@xxxxxxxxx>
Reviewed-by: Len Brown <len.brown@xxxxxxxxx>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
---
Changes since v1:
* Made get_one_hfi_cap() return void. Removed unnecessary checks.
(Rafael)
* Replaced raw_spin_[un]lock_irq[restore|save]() with raw_spin_
[un]lock_irq() in get_one_hfi_cap(). This function is only called from
a workqueue and there is no need to save and restore irq flags.
* Scaled performance and energy efficiency values to a [0, 1023] interval
when reporting values to user space via thermal netlink notifications.
(Lucasz).
* Reworded commit message to comment on the scaling of HFI capabilities
to comply with the proposed thermal netlink ABI.
---
drivers/thermal/intel/Kconfig | 1 +
drivers/thermal/intel/intel_hfi.c | 57 ++++++++++++++++++++++++++++++-
2 files changed, 57 insertions(+), 1 deletion(-)
diff --git a/drivers/thermal/intel/Kconfig b/drivers/thermal/intel/Kconfig
index 1a21ff60fdc7..2f3e49379cee 100644
--- a/drivers/thermal/intel/Kconfig
+++ b/drivers/thermal/intel/Kconfig
@@ -104,6 +104,7 @@ config INTEL_HFI
bool "Intel Hardware Feedback Interface"
depends on CPU_SUP_INTEL
depends on X86_THERMAL_VECTOR
+ select THERMAL_NETLINK
help
Select this option to enable the Hardware Feedback Interface. If
selected, hardware provides guidance to the operating system on
diff --git a/drivers/thermal/intel/intel_hfi.c b/drivers/thermal/intel/intel_hfi.c
index 227d2f258666..1466734c168a 100644
--- a/drivers/thermal/intel/intel_hfi.c
+++ b/drivers/thermal/intel/intel_hfi.c
@@ -25,6 +25,7 @@
#include <linux/io.h>
#include <linux/slab.h>
+#include "../thermal_core.h"
#include "intel_hfi.h"
#define THERM_STATUS_CLEAR_PKG_MASK (BIT(1) | BIT(3) | BIT(5) | BIT(7) | \
@@ -149,6 +150,60 @@ static struct hfi_features hfi_features;
static DEFINE_MUTEX(hfi_lock);
#define HFI_UPDATE_INTERVAL HZ
+#define HFI_MAX_THERM_NOTIFY_COUNT 16
+
+static void get_one_hfi_cap(struct hfi_instance *hfi_instance, s16 index,
+ struct hfi_cpu_data *hfi_caps)
+{
+ struct hfi_cpu_data *caps;
+
+ /* Find the capabilities of @cpu */
+ raw_spin_lock_irq(&hfi_instance->table_lock);
+ caps = hfi_instance->data + index * hfi_features.cpu_stride;
+ memcpy(hfi_caps, caps, sizeof(*hfi_caps));
+ raw_spin_unlock_irq(&hfi_instance->table_lock);
+}
+
+/*
+ * Call update_capabilities() when there are changes in the HFI table.
+ */
+static void update_capabilities(struct hfi_instance *hfi_instance)
+{
+ struct cpu_capability cpu_caps[HFI_MAX_THERM_NOTIFY_COUNT];
+ int i = 0, cpu;
+
+ for_each_cpu(cpu, hfi_instance->cpus) {
+ struct hfi_cpu_data caps;
+ s16 index;
+
+ /*
+ * We know index is valid because this CPU is present
+ * in this instance.
+ */
+ index = per_cpu(hfi_cpu_info, cpu).index;
+
+ get_one_hfi_cap(hfi_instance, index, &caps);
+
+ cpu_caps[i].cpu = cpu;
+
+ /*
+ * Scale performance and energy efficiency to
+ * the [0, 1023] interval that thermal netlink uses.
+ */
+ cpu_caps[i].performance = caps.perf_cap << 2;
+ cpu_caps[i].efficiency = caps.ee_cap << 2;
+ ++i;
+
+ if (i >= HFI_MAX_THERM_NOTIFY_COUNT) {
+ thermal_genl_cpu_capability_event(HFI_MAX_THERM_NOTIFY_COUNT,
+ cpu_caps);
+ i = 0;
+ }
+ }
+
+ if (i)
+ thermal_genl_cpu_capability_event(i, cpu_caps);
+}
static void hfi_update_work_fn(struct work_struct *work)
{
@@ -159,7 +214,7 @@ static void hfi_update_work_fn(struct work_struct *work)
if (!hfi_instance)
return;
- /* TODO: Consume update here. */
+ update_capabilities(hfi_instance);
}
void intel_hfi_process_event(__u64 pkg_therm_status_msr_val)
--
2.17.1
