Signed-off-by: Soren Brinkmann <soren.brinkmann@xxxxxxxxxx> Cc: Grant Likely <grant.likely@xxxxxxxxxx> Cc: Rob Herring <rob.herring@xxxxxxxxxxx> Cc: Rob Landley <rob@xxxxxxxxxxx> Cc: devicetree-discuss@xxxxxxxxxxxxxxxx Cc: linux-doc@xxxxxxxxxxxxxxx --- .../devicetree/bindings/clock/zynq-7000.txt | 49 --- drivers/clk/clk-zynq.c | 378 --------------------- 2 files changed, 427 deletions(-) delete mode 100644 drivers/clk/clk-zynq.c diff --git a/Documentation/devicetree/bindings/clock/zynq-7000.txt b/Documentation/devicetree/bindings/clock/zynq-7000.txt index 30bfca9..b013ec6 100644 --- a/Documentation/devicetree/bindings/clock/zynq-7000.txt +++ b/Documentation/devicetree/bindings/clock/zynq-7000.txt @@ -102,52 +102,3 @@ Example: clocks = <&clkc 16>, <&clk_foo>; clock-names = "gem1_emio_clk", "can_mio_clk_23"; }; - - -== PLLs == - -Used to describe the ARM_PLL, DDR_PLL, and IO_PLL. - -Required properties: -- #clock-cells : shall be 0 (only one clock is output from this node) -- compatible : "xlnx,zynq-pll" -- reg : pair of u32 values, which are the address offsets within the SLCR - of the relevant PLL_CTRL register and PLL_CFG register respectively -- clocks : phandle for parent clock. should be the phandle for ps_clk - -Optional properties: -- clock-output-names : name of the output clock - -Example: - armpll: armpll { - #clock-cells = <0>; - compatible = "xlnx,zynq-pll"; - clocks = <&ps_clk>; - reg = <0x100 0x110>; - clock-output-names = "armpll"; - }; - -== Peripheral clocks == - -Describes clock node for the SDIO, SMC, SPI, QSPI, and UART clocks. - -Required properties: -- #clock-cells : shall be 1 -- compatible : "xlnx,zynq-periph-clock" -- reg : a single u32 value, describing the offset within the SLCR where - the CLK_CTRL register is found for this peripheral -- clocks : phandle for parent clocks. should hold phandles for - the IO_PLL, ARM_PLL, and DDR_PLL in order -- clock-output-names : names of the output clock(s). For peripherals that have - two output clocks (for example, the UART), two clocks - should be listed. - -Example: - uart_clk: uart_clk { - #clock-cells = <1>; - compatible = "xlnx,zynq-periph-clock"; - clocks = <&iopll &armpll &ddrpll>; - reg = <0x154>; - clock-output-names = "uart0_ref_clk", - "uart1_ref_clk"; - }; diff --git a/drivers/clk/clk-zynq.c b/drivers/clk/clk-zynq.c deleted file mode 100644 index 3206297..0000000 --- a/drivers/clk/clk-zynq.c +++ /dev/null @@ -1,378 +0,0 @@ -/* - * Copyright (c) 2012 National Instruments - * - * Josh Cartwright <josh.cartwright@xxxxxx> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include <linux/io.h> -#include <linux/of.h> -#include <linux/slab.h> -#include <linux/kernel.h> -#include <linux/clk-provider.h> -#include <linux/clk/zynq.h> - -static void __iomem *slcr_base; - -struct zynq_pll_clk { - struct clk_hw hw; - void __iomem *pll_ctrl; - void __iomem *pll_cfg; -}; - -#define to_zynq_pll_clk(hw) container_of(hw, struct zynq_pll_clk, hw) - -#define CTRL_PLL_FDIV(x) ((x) >> 12) - -static unsigned long zynq_pll_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct zynq_pll_clk *pll = to_zynq_pll_clk(hw); - return parent_rate * CTRL_PLL_FDIV(ioread32(pll->pll_ctrl)); -} - -static const struct clk_ops zynq_pll_clk_ops = { - .recalc_rate = zynq_pll_recalc_rate, -}; - -static void __init zynq_pll_clk_setup(struct device_node *np) -{ - struct clk_init_data init; - struct zynq_pll_clk *pll; - const char *parent_name; - struct clk *clk; - u32 regs[2]; - int ret; - - ret = of_property_read_u32_array(np, "reg", regs, ARRAY_SIZE(regs)); - if (WARN_ON(ret)) - return; - - pll = kzalloc(sizeof(*pll), GFP_KERNEL); - if (WARN_ON(!pll)) - return; - - pll->pll_ctrl = slcr_base + regs[0]; - pll->pll_cfg = slcr_base + regs[1]; - - of_property_read_string(np, "clock-output-names", &init.name); - - init.ops = &zynq_pll_clk_ops; - parent_name = of_clk_get_parent_name(np, 0); - init.parent_names = &parent_name; - init.num_parents = 1; - - pll->hw.init = &init; - - clk = clk_register(NULL, &pll->hw); - if (WARN_ON(IS_ERR(clk))) - return; - - ret = of_clk_add_provider(np, of_clk_src_simple_get, clk); - if (WARN_ON(ret)) - return; -} -CLK_OF_DECLARE(zynq_pll, "xlnx,zynq-pll", zynq_pll_clk_setup); - -struct zynq_periph_clk { - struct clk_hw hw; - struct clk_onecell_data onecell_data; - struct clk *gates[2]; - void __iomem *clk_ctrl; - spinlock_t clkact_lock; -}; - -#define to_zynq_periph_clk(hw) container_of(hw, struct zynq_periph_clk, hw) - -static const u8 periph_clk_parent_map[] = { - 0, 0, 1, 2 -}; -#define PERIPH_CLK_CTRL_SRC(x) (periph_clk_parent_map[((x) & 0x30) >> 4]) -#define PERIPH_CLK_CTRL_DIV(x) (((x) & 0x3F00) >> 8) - -static unsigned long zynq_periph_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct zynq_periph_clk *periph = to_zynq_periph_clk(hw); - return parent_rate / PERIPH_CLK_CTRL_DIV(ioread32(periph->clk_ctrl)); -} - -static u8 zynq_periph_get_parent(struct clk_hw *hw) -{ - struct zynq_periph_clk *periph = to_zynq_periph_clk(hw); - return PERIPH_CLK_CTRL_SRC(ioread32(periph->clk_ctrl)); -} - -static const struct clk_ops zynq_periph_clk_ops = { - .recalc_rate = zynq_periph_recalc_rate, - .get_parent = zynq_periph_get_parent, -}; - -static void __init zynq_periph_clk_setup(struct device_node *np) -{ - struct zynq_periph_clk *periph; - const char *parent_names[3]; - struct clk_init_data init; - int clk_num = 0, err; - const char *name; - struct clk *clk; - u32 reg; - int i; - - err = of_property_read_u32(np, "reg", ®); - if (WARN_ON(err)) - return; - - periph = kzalloc(sizeof(*periph), GFP_KERNEL); - if (WARN_ON(!periph)) - return; - - periph->clk_ctrl = slcr_base + reg; - spin_lock_init(&periph->clkact_lock); - - init.name = np->name; - init.ops = &zynq_periph_clk_ops; - for (i = 0; i < ARRAY_SIZE(parent_names); i++) - parent_names[i] = of_clk_get_parent_name(np, i); - init.parent_names = parent_names; - init.num_parents = ARRAY_SIZE(parent_names); - - periph->hw.init = &init; - - clk = clk_register(NULL, &periph->hw); - if (WARN_ON(IS_ERR(clk))) - return; - - err = of_clk_add_provider(np, of_clk_src_simple_get, clk); - if (WARN_ON(err)) - return; - - err = of_property_read_string_index(np, "clock-output-names", 0, - &name); - if (WARN_ON(err)) - return; - - periph->gates[0] = clk_register_gate(NULL, name, np->name, 0, - periph->clk_ctrl, 0, 0, - &periph->clkact_lock); - if (WARN_ON(IS_ERR(periph->gates[0]))) - return; - clk_num++; - - /* some periph clks have 2 downstream gates */ - err = of_property_read_string_index(np, "clock-output-names", 1, - &name); - if (err != -ENODATA) { - periph->gates[1] = clk_register_gate(NULL, name, np->name, 0, - periph->clk_ctrl, 1, 0, - &periph->clkact_lock); - if (WARN_ON(IS_ERR(periph->gates[1]))) - return; - clk_num++; - } - - periph->onecell_data.clks = periph->gates; - periph->onecell_data.clk_num = clk_num; - - err = of_clk_add_provider(np, of_clk_src_onecell_get, - &periph->onecell_data); - if (WARN_ON(err)) - return; -} -CLK_OF_DECLARE(zynq_periph, "xlnx,zynq-periph-clock", zynq_periph_clk_setup); - -/* CPU Clock domain is modelled as a mux with 4 children subclks, whose - * derivative rates depend on CLK_621_TRUE - */ - -struct zynq_cpu_clk { - struct clk_hw hw; - struct clk_onecell_data onecell_data; - struct clk *subclks[4]; - void __iomem *clk_ctrl; - spinlock_t clkact_lock; -}; - -#define to_zynq_cpu_clk(hw) container_of(hw, struct zynq_cpu_clk, hw) - -static const u8 zynq_cpu_clk_parent_map[] = { - 1, 1, 2, 0 -}; -#define CPU_CLK_SRCSEL(x) (zynq_cpu_clk_parent_map[(((x) & 0x30) >> 4)]) -#define CPU_CLK_CTRL_DIV(x) (((x) & 0x3F00) >> 8) - -static u8 zynq_cpu_clk_get_parent(struct clk_hw *hw) -{ - struct zynq_cpu_clk *cpuclk = to_zynq_cpu_clk(hw); - return CPU_CLK_SRCSEL(ioread32(cpuclk->clk_ctrl)); -} - -static unsigned long zynq_cpu_clk_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct zynq_cpu_clk *cpuclk = to_zynq_cpu_clk(hw); - return parent_rate / CPU_CLK_CTRL_DIV(ioread32(cpuclk->clk_ctrl)); -} - -static const struct clk_ops zynq_cpu_clk_ops = { - .get_parent = zynq_cpu_clk_get_parent, - .recalc_rate = zynq_cpu_clk_recalc_rate, -}; - -struct zynq_cpu_subclk { - struct clk_hw hw; - void __iomem *clk_621; - enum { - CPU_SUBCLK_6X4X, - CPU_SUBCLK_3X2X, - CPU_SUBCLK_2X, - CPU_SUBCLK_1X, - } which; -}; - -#define CLK_621_TRUE(x) ((x) & 1) - -#define to_zynq_cpu_subclk(hw) container_of(hw, struct zynq_cpu_subclk, hw); - -static unsigned long zynq_cpu_subclk_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - unsigned long uninitialized_var(rate); - struct zynq_cpu_subclk *subclk; - bool is_621; - - subclk = to_zynq_cpu_subclk(hw) - is_621 = CLK_621_TRUE(ioread32(subclk->clk_621)); - - switch (subclk->which) { - case CPU_SUBCLK_6X4X: - rate = parent_rate; - break; - case CPU_SUBCLK_3X2X: - rate = parent_rate / 2; - break; - case CPU_SUBCLK_2X: - rate = parent_rate / (is_621 ? 3 : 2); - break; - case CPU_SUBCLK_1X: - rate = parent_rate / (is_621 ? 6 : 4); - break; - }; - - return rate; -} - -static const struct clk_ops zynq_cpu_subclk_ops = { - .recalc_rate = zynq_cpu_subclk_recalc_rate, -}; - -static struct clk *zynq_cpu_subclk_setup(struct device_node *np, u8 which, - void __iomem *clk_621) -{ - struct zynq_cpu_subclk *subclk; - struct clk_init_data init; - struct clk *clk; - int err; - - err = of_property_read_string_index(np, "clock-output-names", - which, &init.name); - if (WARN_ON(err)) - goto err_read_output_name; - - subclk = kzalloc(sizeof(*subclk), GFP_KERNEL); - if (!subclk) - goto err_subclk_alloc; - - subclk->clk_621 = clk_621; - subclk->which = which; - - init.ops = &zynq_cpu_subclk_ops; - init.parent_names = &np->name; - init.num_parents = 1; - - subclk->hw.init = &init; - - clk = clk_register(NULL, &subclk->hw); - if (WARN_ON(IS_ERR(clk))) - goto err_clk_register; - - return clk; - -err_clk_register: - kfree(subclk); -err_subclk_alloc: -err_read_output_name: - return ERR_PTR(-EINVAL); -} - -static void __init zynq_cpu_clk_setup(struct device_node *np) -{ - struct zynq_cpu_clk *cpuclk; - const char *parent_names[3]; - struct clk_init_data init; - void __iomem *clk_621; - struct clk *clk; - u32 reg[2]; - int err; - int i; - - err = of_property_read_u32_array(np, "reg", reg, ARRAY_SIZE(reg)); - if (WARN_ON(err)) - return; - - cpuclk = kzalloc(sizeof(*cpuclk), GFP_KERNEL); - if (WARN_ON(!cpuclk)) - return; - - cpuclk->clk_ctrl = slcr_base + reg[0]; - clk_621 = slcr_base + reg[1]; - spin_lock_init(&cpuclk->clkact_lock); - - init.name = np->name; - init.ops = &zynq_cpu_clk_ops; - for (i = 0; i < ARRAY_SIZE(parent_names); i++) - parent_names[i] = of_clk_get_parent_name(np, i); - init.parent_names = parent_names; - init.num_parents = ARRAY_SIZE(parent_names); - - cpuclk->hw.init = &init; - - clk = clk_register(NULL, &cpuclk->hw); - if (WARN_ON(IS_ERR(clk))) - return; - - err = of_clk_add_provider(np, of_clk_src_simple_get, clk); - if (WARN_ON(err)) - return; - - for (i = 0; i < 4; i++) { - cpuclk->subclks[i] = zynq_cpu_subclk_setup(np, i, clk_621); - if (WARN_ON(IS_ERR(cpuclk->subclks[i]))) - return; - } - - cpuclk->onecell_data.clks = cpuclk->subclks; - cpuclk->onecell_data.clk_num = i; - - err = of_clk_add_provider(np, of_clk_src_onecell_get, - &cpuclk->onecell_data); - if (WARN_ON(err)) - return; -} -CLK_OF_DECLARE(zynq_cpu, "xlnx,zynq-cpu-clock", zynq_cpu_clk_setup); - -void __init xilinx_zynq_clocks_init(void __iomem *slcr) -{ - slcr_base = slcr; - of_clk_init(NULL); -} -- 1.8.2.3 -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html