Re: [PATCH v4 04/14] Documentation/x86: Secure Launch kernel documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2021-12-03 15:47, Ross Philipson wrote:
On 12/2/21 12:26, Robin Murphy wrote:
On 2021-08-27 14:28, Ross Philipson wrote:
[...]
+IOMMU Configuration
+-------------------
+
+When doing a Secure Launch, the IOMMU should always be enabled and
the drivers
+loaded. However, IOMMU passthrough mode should never be used. This
leaves the
+MLE completely exposed to DMA after the PMR's [2]_ are disabled.
First, IOMMU
+passthrough should be disabled by default in the build configuration::
+
+  "Device Drivers" -->
+      "IOMMU Hardware Support" -->
+          "IOMMU passthrough by default [ ]"
+
+This unset the Kconfig value CONFIG_IOMMU_DEFAULT_PASSTHROUGH.

Note that the config structure has now changed, and if set, passthrough
is deselected by choosing a different default domain type.

Thanks for the heads up. We will have to modify this for how things
exist today.


+In addition, passthrough must be disabled on the kernel command line
when doing
+a Secure Launch as follows::
+
+  iommu=nopt iommu.passthrough=0

This part is a bit silly - those options are literally aliases for the
exact same thing, and furthermore if the config is already set as
required then the sole effect either of them will have is to cause "(set
by kernel command line)" to be printed. There is no value in explicitly
overriding the default value with the default value - if anyone can
append an additional "iommu.passthrough=1" (or "iommu=pt") to the end of
the command line they'll still win.

I feel like when we worked on this, it was still important to set those
values. This could have been in an older kernel version. We will go back
and verify what you are saying here and adjust the documentation
accordingly.

As to anyone just adding values to the command line, that is why the
command line is part of the DRTM measurements.

Yeah, I had a vague memory that that was the case - basically if you can trust the command line as much as the config then it's definitely redundant to pass an option for this (see iommu_subsys_init() - it's now all plumbed through iommu_def_domain_type), and if you can't then passing them is futile anyway.

Cheers,
Robin.



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux