On Wednesday 08 May 2013, Srinivas KANDAGATLA wrote:
> From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxx>
>
> The STiH415 is the next generation of HD, AVC set-top box processors for
> satellite, cable, terrestrial and IP-STB markets. It is an ARM Cortex-A9
> 1.0 GHz, dual-core CPU.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxx>
> CC: Stephen Gallimore <stephen.gallimore@xxxxxx>
> CC: Stuart Menefy <stuart.menefy@xxxxxx>
> ---
> Documentation/arm/STiH41x/overview.txt | 39 ++
> Documentation/arm/STiH41x/stih415-overview.txt | 12 +
> arch/arm/Kconfig | 3 +
> arch/arm/Kconfig.debug | 38 ++
> arch/arm/Makefile | 2 +
> arch/arm/boot/dts/stih415-clock.dtsi | 38 ++
> arch/arm/boot/dts/stih415-pinctrl.dtsi | 480 ++++++++++++++++++++++++
> arch/arm/boot/dts/stih415.dtsi | 94 +++++
> arch/arm/boot/dts/stih415.h | 20 +
> arch/arm/boot/dts/stih41x.dtsi | 30 ++
> arch/arm/boot/dts/stixxxx-pincfg.h | 95 +++++
> arch/arm/configs/stih41x_defconfig | 94 +++++
> arch/arm/include/debug/stixxxx.S | 61 +++
> arch/arm/mach-stih41x/Kconfig | 35 ++
> arch/arm/mach-stih41x/Makefile | 4 +
> arch/arm/mach-stih41x/board-dt.c | 76 ++++
> arch/arm/mach-stih41x/stih41x.c | 82 ++++
> arch/arm/mach-stih41x/stih41x.h | 7 +
> arch/arm/plat-stixxxx/Kconfig | 2 +
> arch/arm/plat-stixxxx/Makefile | 2 +
> arch/arm/plat-stixxxx/headsmp.S | 44 +++
> arch/arm/plat-stixxxx/include/plat/hardware.h | 20 +
> arch/arm/plat-stixxxx/include/plat/smp.h | 19 +
> arch/arm/plat-stixxxx/platsmp.c | 144 +++++++
I think there is no point in having a separate mach- and plat- directory
here, given that modern machines require very little code. You can probably
fold the three files in mach-stih41x (board-dt.c, stih41x.c and stih41x.h)
into a single file and rename plat-stixxxx to mach-stixxxx
> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> index 9b31f43..42a5193 100644
> --- a/arch/arm/Kconfig.debug
> +++ b/arch/arm/Kconfig.debug
> @@ -447,6 +447,16 @@ choice
> This option selects UART0 on VIA/Wondermedia System-on-a-chip
> devices, including VT8500, WM8505, WM8650 and WM8850.
>
> + config DEBUG_STIH41X_UART
> + depends on ARCH_STIH41X
> + bool "Use StiH415/416 ASC for low-level debug"
> + help
> + Say Y here if you want kernel low-level debugging support
> + on StiH415/416 based platforms like B2000, B2020.
> + It support UART2 and SBC_UART1.
> +
> + If unsure, say N.
> +
> config DEBUG_LL_UART_NONE
> bool "No low-level debugging UART"
> depends on !ARCH_MULTIPLATFORM
I would split out the debug code into a separate patch though.
> @@ -600,6 +637,7 @@ config DEBUG_LL_INCLUDE
> default "debug/vt8500.S" if DEBUG_VT8500_UART0
> default "debug/tegra.S" if DEBUG_TEGRA_UART
> default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
> + default "debug/stixxxx.S" if DEBUG_STIH41X_UART
> default "mach/debug-macro.S"
Please keep this in alphabetical order.
> + soc {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + #interrupt-cells = <3>;
> + interrupt-parent = <&intc>;
The "#interrupt-cells" property doesn't belong here I think.
> +
> + uart2: uart@fed32000 {
> + compatible = "st,asc";
> + status = "disabled";
> + reg = <0xfed32000 0x2c>;
> + interrupts = <0 197 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart2>;
> + clocks = <&CLKS_ICN_REG_0>;
> + };
> +
> + /* SBC comms block ASCs in SASG1 */
> + sbc_uart1: uart@fe531000 {
> + compatible = "st,asc";
> + status = "disabled";
> + reg = <0xfe531000 0x2c>;
> + interrupts = <0 210 0>;
> + clocks = <&CLK_SYSIN>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_sbc_uart1>;
> + };
> + };
Please name these devices "serial", not "uart".
> diff --git a/arch/arm/configs/stih41x_defconfig b/arch/arm/configs/stih41x_defconfig
> new file mode 100644
> index 0000000..dd9268b
> --- /dev/null
> +++ b/arch/arm/configs/stih41x_defconfig
I would prefer to have this be part of multi_v7_defconfig, unless
you have strong reason why it can't be.
> diff --git a/arch/arm/mach-stih41x/Kconfig b/arch/arm/mach-stih41x/Kconfig
> new file mode 100644
> index 0000000..9c40540
> --- /dev/null
> +++ b/arch/arm/mach-stih41x/Kconfig
> @@ -0,0 +1,35 @@
> +config ARCH_STIH41X
> + bool "STMicroelectronics STiH41x SOCs with Flattened Device Tree" if ARCH_MULTI_V7
> + select GENERIC_CLOCKEVENTS
> + select CLKDEV_LOOKUP
> + select ARM_GIC
> +if ARCH_STIH41X
> +menu "STMicroelectronics Consumer Electronics SOCs"
You can use 'menuconfig' to combine these two.
> +static void __init stih41x_timer_init(void)
> +{
> + of_clk_init(NULL);
> + clocksource_of_init();
> + stih41x_l2x0_init();
> +}
I'm hoping we can kill make the clk and l2x0 init work by default in 3.11,
as clocksource_of_init already does, so you won't need this function
any more.
> +/*
> + * A basic implementation of irq_set_wake that ensures wakeup source
> + * interrupts are not disabled during PM_SUSPEND_FREEZE.
> + */
> +static int stih41x_set_wake(struct irq_data *d, unsigned int on)
> +{
> + struct irq_desc *desc = irq_to_desc(d->irq);
> +
> + if (on) {
> + if (desc->action)
> + desc->action->flags |= IRQF_NO_SUSPEND;
> + } else {
> + if (desc->action)
> + desc->action->flags &= ~IRQF_NO_SUSPEND;
> + }
> + return 0;
> +}
> +
> +static void __init stih41x_irq_init(void)
> +{
> + gic_arch_extn.irq_set_wake = stih41x_set_wake;
> + gic_arch_extn.flags = IRQCHIP_MASK_ON_SUSPEND;
> +
> + irqchip_init();
> +}
This looks like it should be generic. Why do you need this?
> +void __init stih41x_dt_init(void)
> +{
> + of_platform_populate(NULL, of_default_bus_match_table,
> + NULL, NULL);
> + return;
> +}
This is already not needed in 3.10.
> +static struct map_desc stih41x_io_desc[] __initdata = {
> +#ifdef CONFIG_SMP
> + {
> + .virtual = IO_ADDRESS(MPE41_SCU_BASE),
> + .pfn = __phys_to_pfn(MPE41_SCU_BASE),
> + .length = SZ_4K,
> + .type = MT_DEVICE,
> + },
> +#endif
> +void __init stih41x_map_io(void)
> +{
> +#ifdef CONFIG_SMP
> + stixxxx_scu_base_addr = ((void __iomem *)IO_ADDRESS(MPE41_SCU_BASE));
> +#endif
> + iotable_init(stih41x_io_desc, ARRAY_SIZE(stih41x_io_desc));
> +}
IIRC the SCU no longer needs to be mapped this early, so you can use
ioremap these days.
> +void __init stih41x_l2x0_init(void)
> +{
> + u32 way_size = 0x4;
> + u32 aux_ctrl;
> +
> + aux_ctrl = (0x1 << L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT) |
> + (0x1 << L2X0_AUX_CTRL_DATA_PREFETCH_SHIFT) |
> + (0x1 << L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT) |
> + (way_size << L2X0_AUX_CTRL_WAY_SIZE_SHIFT);
> +
> + l2x0_of_init(aux_ctrl, L2X0_AUX_CTRL_MASK);
> +}
I don't know where we stand on this, but I think we should kill all
calls like these.
Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
