This is another attempt in adding support for PHY LEDs. Most of the
times Switch/PHY have connected multiple LEDs that are controlled by HW
based on some rules/event. Currently we lack any support for a generic
way to control the HW part and normally we either never implement the
feature or only add control for brightness or hw blink.
This is based on Marek idea of providing some API to cled but use a
different implementation that in theory should be more generilized.
The current idea is:
- LED driver implement 3 API (hw_control_status/start/stop).
They are used to put the LED in hardware mode and to configure the
various trigger.
- We have hardware triggers that are used to expose to userspace the
supported hardware mode and set the hardware mode on trigger
activation.
- We can also have triggers that both support hardware and software mode.
- The LED driver will declare each supported hardware blink mode and
communicate with the trigger all the supported blink modes that will
be available by sysfs.
- A trigger will use blink_set to configure the blink mode to active
in hardware mode.
- On hardware trigger activation, only the hardware mode is enabled but
the blink modes are not configured. The LED driver should reset any
link mode active by default.
Each LED driver will have to declare explicit support for the offload
trigger (or return not supported error code) as we the trigger_data that
the LED driver will elaborate and understand what is referring to (based
on the current active trigger).
I posted a user for this new implementation that will benefit from this
and will add a big feature to it. Currently qca8k can have up to 3 LEDs
connected to each PHY port and we have some device that have only one of
them connected and the default configuration won't work for that.
I also posted the netdev trigger expanded with the hardware support.
More polish is required but this is just to understand if I'm taking
the correct path with this implementation hoping we find a correct
implementation and we start working on the ""small details""
v5:
- Move out of RFC. (no comments from Andrew this is the right path?)
- Fix more spelling mistake (thx Randy)
- Fix error reported by kernel test bot
- Drop the additional HW_CONTROL flag. It does simplify CONFIG
handling and hw control should be available anyway to support
triggers as module.
v4:
- Rework implementation and drop hw_configure logic.
We now expand blink_set.
- Address even more spelling mistake. (thx a lot Randy)
- Drop blink option and use blink_set delay.
- Rework phy-activity trigger to actually make the groups dynamic.
v3:
- Rework start/stop as Andrew asked.
- Introduce more logic to permit a trigger to run in hardware mode.
- Add additional patch with netdev hardware support.
- Use test_bit API to check flag passed to hw_control_configure.
- Added a new cmd to hw_control_configure to reset any active blink_mode.
- Refactor all the patches to follow this new implementation.
v2:
- Fix spelling mistake (sorry)
- Drop patch 02 "permit to declare supported offload triggers".
Change the logic, now the LED driver declare support for them
using the configure_offload with the cmd TRIGGER_SUPPORTED.
- Rework code to follow this new implementation.
- Update Documentation to better describe how this offload
implementation work.
Ansuel Smith (8):
leds: add support for hardware driven LEDs
leds: document additional use of blink_set for hardware control
leds: trigger: netdev: drop NETDEV_LED_MODE_LINKUP from mode
leds: trigger: netdev: rename and expose NETDEV trigger enum and
struct
leds: trigger: netdev: add hardware control support
leds: trigger: add hardware-phy-activity trigger
net: dsa: qca8k: add LEDs support
dt-bindings: net: dsa: qca8k: add LEDs definition example
.../devicetree/bindings/net/dsa/qca8k.yaml | 20 +
Documentation/leds/leds-class.rst | 49 ++
drivers/leds/led-class.c | 40 ++
drivers/leds/led-triggers.c | 22 +
drivers/leds/trigger/Kconfig | 37 +-
drivers/leds/trigger/Makefile | 1 +
.../trigger/ledtrig-hardware-phy-activity.c | 180 ++++++++
drivers/leds/trigger/ledtrig-netdev.c | 92 ++--
drivers/net/dsa/Kconfig | 11 +
drivers/net/dsa/Makefile | 1 +
drivers/net/dsa/qca8k-leds.c | 423 ++++++++++++++++++
drivers/net/dsa/qca8k.c | 8 +-
drivers/net/dsa/qca8k.h | 65 +++
include/linux/leds.h | 94 +++-
14 files changed, 995 insertions(+), 48 deletions(-)
create mode 100644 drivers/leds/trigger/ledtrig-hardware-phy-activity.c
create mode 100644 drivers/net/dsa/qca8k-leds.c
--
2.32.0
