Add LEDs support for qca8k Switch Family. This will provide the LEDs
hardware API to permit the PHY LED to support hardware mode.
Each port have at least 3 LEDs and they can HW blink, set on/off or
follow blink modes configured with the LED in hardware mode..
This adds support for 2 hardware trigger netdev and
hardware-phy-activity.
Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx>
---
drivers/net/dsa/Kconfig | 9 +
drivers/net/dsa/Makefile | 1 +
drivers/net/dsa/qca8k-leds.c | 423 +++++++++++++++++++++++++++++++++++
drivers/net/dsa/qca8k.c | 8 +-
drivers/net/dsa/qca8k.h | 65 ++++++
5 files changed, 504 insertions(+), 2 deletions(-)
create mode 100644 drivers/net/dsa/qca8k-leds.c
diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
index 7b1457a6e327..9f4bae5cc43d 100644
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -67,6 +67,15 @@ config NET_DSA_QCA8K
This enables support for the Qualcomm Atheros QCA8K Ethernet
switch chips.
+config NET_DSA_QCA8K_LEDS_SUPPORT
+ tristate "Qualcomm Atheros QCA8K Ethernet switch family LEDs support"
+ select NET_DSA_QCA8K
+ select LEDS_OFFLOAD_TRIGGERS
+ help
+ This enables support for LEDs present on the Qualcomm Atheros
+ QCA8K Ethernet switch chips. This require the LEDs offload
+ triggers support as it can run in offload mode.
+
config NET_DSA_REALTEK_SMI
tristate "Realtek SMI Ethernet switch family support"
select NET_DSA_TAG_RTL4_A
diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile
index 8da1569a34e6..fb1e7d0cf126 100644
--- a/drivers/net/dsa/Makefile
+++ b/drivers/net/dsa/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_NET_DSA_LANTIQ_GSWIP) += lantiq_gswip.o
obj-$(CONFIG_NET_DSA_MT7530) += mt7530.o
obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o
+obj-$(CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT) += qca8k-leds.o
obj-$(CONFIG_NET_DSA_REALTEK_SMI) += realtek-smi.o
realtek-smi-objs := realtek-smi-core.o rtl8366.o rtl8366rb.o rtl8365mb.o
obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o
diff --git a/drivers/net/dsa/qca8k-leds.c b/drivers/net/dsa/qca8k-leds.c
new file mode 100644
index 000000000000..729e55dedc9d
--- /dev/null
+++ b/drivers/net/dsa/qca8k-leds.c
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <net/dsa.h>
+
+#include "qca8k.h"
+
+static int
+qca8k_get_enable_led_reg(int port_num, int led_num, struct qca8k_led_pattern_en *reg_info)
+{
+ int shift;
+
+ switch (port_num) {
+ case 0:
+ reg_info->reg = QCA8K_LED_CTRL_REG(led_num);
+ reg_info->shift = 14;
+ break;
+ case 1:
+ case 2:
+ case 3:
+ reg_info->reg = QCA8K_LED_CTRL_REG(3);
+ shift = 2 * led_num + (6 * (port_num - 1));
+
+ reg_info->shift = 8 + shift;
+
+ break;
+ case 4:
+ reg_info->reg = QCA8K_LED_CTRL_REG(led_num);
+ reg_info->shift = 30;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int
+qca8k_get_control_led_reg(int port_num, int led_num, struct qca8k_led_pattern_en *reg_info)
+{
+ reg_info->reg = QCA8K_LED_CTRL_REG(led_num);
+
+ /* 6 total control rule:
+ * 3 control rules for phy0-3 that applies to all their leds
+ * 3 control rules for phy4
+ */
+ if (port_num == 4)
+ reg_info->shift = 16;
+ else
+ reg_info->shift = 0;
+
+ return 0;
+}
+
+static void
+qca8k_check_rules(unsigned long *mode, u32 *offload_trigger,
+ int trigger_bit, int blink_mode, bool read)
+{
+ if (read) {
+ if (*offload_trigger & blink_mode)
+ set_bit(trigger_bit, mode);
+ } else {
+ if (test_bit(trigger_bit, mode))
+ *offload_trigger |= blink_mode;
+ }
+}
+
+static int
+qca8k_parse_trigger_hardware_phy_activity(struct led_classdev *ldev, u32 *offload_trigger,
+ u32 *mask, bool read)
+{
+ struct hardware_phy_activity_data *trigger_data = led_get_trigger_data(ldev);
+ unsigned long rules = trigger_data->mode;
+
+ /* Parse rule to hardware phy activity trigger */
+ qca8k_check_rules(&rules, offload_trigger, TRIGGER_PHY_ACTIVITY_BLINK_TX,
+ QCA8K_LED_TX_BLINK_MASK, false);
+ qca8k_check_rules(&rules, offload_trigger, TRIGGER_PHY_ACTIVITY_BLINK_RX,
+ QCA8K_LED_RX_BLINK_MASK, false);
+ qca8k_check_rules(&rules, offload_trigger, TRIGGER_PHY_ACTIVITY_LINK_10M,
+ QCA8K_LED_LINK_10M_EN_MASK, false);
+ qca8k_check_rules(&rules, offload_trigger, TRIGGER_PHY_ACTIVITY_LINK_100M,
+ QCA8K_LED_LINK_100M_EN_MASK, false);
+ qca8k_check_rules(&rules, offload_trigger, TRIGGER_PHY_ACTIVITY_LINK_1000M,
+ QCA8K_LED_LINK_1000M_EN_MASK, false);
+ qca8k_check_rules(&rules, offload_trigger, TRIGGER_PHY_ACTIVITY_HALF_DUPLEX,
+ QCA8K_LED_HALF_DUPLEX_MASK, false);
+ qca8k_check_rules(&rules, offload_trigger, TRIGGER_PHY_ACTIVITY_FULL_DUPLEX,
+ QCA8K_LED_FULL_DUPLEX_MASK, false);
+ qca8k_check_rules(&rules, offload_trigger, TRIGGER_PHY_ACTIVITY_OPTION_LINKUP_OVER,
+ QCA8K_LED_LINKUP_OVER_MASK, false);
+
+ if (!*offload_trigger)
+ return -EOPNOTSUPP;
+
+ *mask = *offload_trigger;
+
+ return 0;
+}
+
+static int
+qca8k_parse_trigger_netdev(struct led_classdev *ldev, u32 *offload_trigger,
+ u32 *mask, bool read)
+{
+ struct led_netdev_data *trigger_data = led_get_trigger_data(ldev);
+ unsigned long rules = trigger_data->mode;
+
+ /* Parse rule to netdev trigger */
+ qca8k_check_rules(&rules, offload_trigger, TRIGGER_NETDEV_TX, QCA8K_LED_TX_BLINK_MASK,
+ false);
+ qca8k_check_rules(&rules, offload_trigger, TRIGGER_NETDEV_RX, QCA8K_LED_RX_BLINK_MASK,
+ false);
+ qca8k_check_rules(&rules, offload_trigger, TRIGGER_NETDEV_LINK,
+ QCA8K_LED_LINK_10M_EN_MASK | QCA8K_LED_LINK_100M_EN_MASK |
+ QCA8K_LED_LINK_1000M_EN_MASK,
+ false);
+
+ if (!*offload_trigger)
+ return -EOPNOTSUPP;
+
+ *mask = *offload_trigger;
+
+ return 0;
+}
+
+static int
+qca8k_parse_trigger(struct led_classdev *ldev, u32 *offload_trigger, u32 *mask,
+ bool read)
+{
+ struct led_trigger *trigger = ldev->trigger;
+ int ret;
+
+ if (strcmp(trigger->name, "hardware-phy-activity") &&
+ strcmp(trigger->name, "netdev"))
+ return -EINVAL;
+
+ if (!strcmp(trigger->name, "hardware-phy-activity"))
+ ret = qca8k_parse_trigger_hardware_phy_activity(ldev, offload_trigger, mask, read);
+
+ if (!strcmp(trigger->name, "netdev"))
+ ret = qca8k_parse_trigger_netdev(ldev, offload_trigger, mask, read);
+
+ return ret;
+}
+
+static int
+qca8k_cled_blink_set(struct led_classdev *ldev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev);
+ struct qca8k_led_pattern_en reg_info;
+ struct qca8k_priv *priv = led->priv;
+ u32 offload_trigger = 0, mask;
+ int ret;
+
+ /* With no trigger selected, use the blink 4hz mode */
+ if (!ldev->trigger) {
+ if (*delay_on == 0 && *delay_off == 0) {
+ *delay_on = 125;
+ *delay_off = 125;
+ }
+
+ if (*delay_on != 125 || *delay_off != 125) {
+ /* The hardware only supports blinking at 4Hz. Fall back
+ * to software implementation in other cases.
+ */
+ return -EINVAL;
+ }
+
+ qca8k_get_enable_led_reg(led->port_num, led->led_num, ®_info);
+
+ return qca8k_rmw(priv, reg_info.reg,
+ GENMASK(1, 0) << reg_info.shift,
+ QCA8K_LED_ALWAYS_BLINK_4HZ << reg_info.shift);
+ }
+
+ /* Check trigger compatibility
+ * With these trigger blink_set will configure the LED pattern reg
+ */
+ ret = qca8k_parse_trigger(ldev, &offload_trigger, &mask, false);
+ if (ret)
+ return ret;
+
+ qca8k_get_control_led_reg(led->port_num, led->led_num, ®_info);
+
+ /* Set 4hz by default */
+ if (*delay_on == 0 && *delay_off == 0)
+ offload_trigger |= QCA8K_LED_BLINK_4HZ;
+
+ if (*delay_on == 250 || *delay_off == 250)
+ offload_trigger |= QCA8K_LED_BLINK_2HZ;
+
+ if (*delay_on == 125 || *delay_off == 125)
+ offload_trigger |= QCA8K_LED_BLINK_4HZ;
+
+ if (*delay_on == 62 || *delay_off == 62)
+ offload_trigger |= QCA8K_LED_BLINK_8HZ;
+
+ return qca8k_rmw(priv, reg_info.reg,
+ mask << reg_info.shift,
+ offload_trigger << reg_info.shift);
+}
+
+static void
+qca8k_led_brightness_set(struct qca8k_led *led,
+ enum led_brightness b)
+{
+ struct qca8k_led_pattern_en reg_info;
+ struct qca8k_priv *priv = led->priv;
+ u32 val = QCA8K_LED_ALWAYS_OFF;
+
+ qca8k_get_enable_led_reg(led->port_num, led->led_num, ®_info);
+
+ if (b)
+ val = QCA8K_LED_ALWAYS_ON;
+
+ qca8k_rmw(priv, reg_info.reg,
+ GENMASK(1, 0) << reg_info.shift,
+ val << reg_info.shift);
+}
+
+static void
+qca8k_cled_brightness_set(struct led_classdev *ldev,
+ enum led_brightness b)
+{
+ struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev);
+
+ return qca8k_led_brightness_set(led, b);
+}
+
+static enum led_brightness
+qca8k_led_brightness_get(struct qca8k_led *led)
+{
+ struct qca8k_led_pattern_en reg_info;
+ struct qca8k_priv *priv = led->priv;
+ u32 val;
+ int ret;
+
+ qca8k_get_enable_led_reg(led->port_num, led->led_num, ®_info);
+
+ ret = qca8k_read(priv, reg_info.reg, &val);
+ if (ret)
+ return 0;
+
+ val >>= reg_info.shift;
+ val &= GENMASK(1, 0);
+
+ return val > 0 ? 1 : 0;
+}
+
+static enum led_brightness
+qca8k_cled_brightness_get(struct led_classdev *ldev)
+{
+ struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev);
+
+ return qca8k_led_brightness_get(led);
+}
+
+static int
+qca8k_cled_hw_control(struct led_classdev *ldev, bool enable)
+{
+ struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev);
+ struct qca8k_led_pattern_en reg_info;
+ struct qca8k_priv *priv = led->priv;
+ u32 val = QCA8K_LED_ALWAYS_OFF;
+
+ qca8k_get_enable_led_reg(led->port_num, led->led_num, ®_info);
+
+ if (enable)
+ val = QCA8K_LED_RULE_CONTROLLED;
+
+ return qca8k_rmw(priv, reg_info.reg,
+ GENMASK(1, 0) << reg_info.shift,
+ val << reg_info.shift);
+}
+
+static int
+qca8k_cled_hw_control_start(struct led_classdev *led_cdev)
+{
+ return qca8k_cled_hw_control(led_cdev, true);
+}
+
+static int
+qca8k_cled_hw_control_stop(struct led_classdev *led_cdev)
+{
+ return qca8k_cled_hw_control(led_cdev, false);
+}
+
+static bool
+qca8k_cled_hw_control_status(struct led_classdev *ldev)
+{
+ struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev);
+
+ struct qca8k_led_pattern_en reg_info;
+ struct qca8k_priv *priv = led->priv;
+ u32 val;
+
+ qca8k_get_enable_led_reg(led->port_num, led->led_num, ®_info);
+
+ qca8k_read(priv, reg_info.reg, &val);
+
+ val >>= reg_info.shift;
+ val &= GENMASK(1, 0);
+
+ return val == QCA8K_LED_RULE_CONTROLLED;
+}
+
+static int
+qca8k_parse_port_leds(struct qca8k_priv *priv, struct fwnode_handle *port, int port_num)
+{
+ struct fwnode_handle *led = NULL, *leds = NULL;
+ struct qca8k_led_pattern_en reg_info;
+ struct led_init_data init_data = { };
+ struct qca8k_led *port_led;
+ int led_num, port_index;
+ const char *state;
+ int ret;
+
+ leds = fwnode_get_named_child_node(port, "leds");
+ if (!leds) {
+ dev_dbg(priv->dev, "No Leds node specified in device tree for port %d!\n",
+ port_num);
+ return 0;
+ }
+
+ fwnode_for_each_child_node(leds, led) {
+ /* Reg rapresent the led number of the port.
+ * Each port can have at least 3 leds attached
+ * Commonly:
+ * 1. is gigabit led
+ * 2. is mbit led
+ * 3. additional status led
+ */
+ if (fwnode_property_read_u32(led, "reg", &led_num))
+ continue;
+
+ if (led_num >= QCA8K_LED_PORT_COUNT) {
+ dev_warn(priv->dev, "Invalid LED reg defined %d", port_num);
+ continue;
+ }
+
+ port_index = 3 * port_num + led_num;
+
+ port_led = &priv->ports_led[port_index];
+ port_led->port_num = port_num;
+ port_led->led_num = led_num;
+ port_led->priv = priv;
+
+ ret = fwnode_property_read_string(led, "default-state", &state);
+ if (!ret) {
+ if (!strcmp(state, "on")) {
+ port_led->cdev.brightness = 1;
+ qca8k_led_brightness_set(port_led, 1);
+ } else if (!strcmp(state, "off")) {
+ port_led->cdev.brightness = 0;
+ qca8k_led_brightness_set(port_led, 0);
+ } else if (!strcmp(state, "keep")) {
+ port_led->cdev.brightness =
+ qca8k_led_brightness_get(port_led);
+ }
+ }
+
+ qca8k_get_enable_led_reg(port_led->port_num, port_led->led_num, ®_info);
+
+ /* Reset blink mode set by default */
+ ret = qca8k_rmw(priv, reg_info.reg, QCA8K_LED_RULE_MASK << reg_info.shift,
+ 0 << reg_info.shift);
+
+ /* 3 brightness settings can be applied from Documentation:
+ * 0 always off
+ * 1 blink at 4Hz
+ * 2 always on
+ * 3 rule controlled
+ * Suppots only 2 mode: (pcb limitation, with always on and blink
+ * only the last led is set to this mode)
+ * 0 always off (sets all leds off)
+ * 3 rule controlled
+ */
+ port_led->cdev.flags |= LED_SOFTWARE_CONTROLLED;
+ port_led->cdev.flags |= LED_HARDWARE_CONTROLLED;
+ port_led->cdev.max_brightness = 1;
+ port_led->cdev.brightness_set = qca8k_cled_brightness_set;
+ port_led->cdev.brightness_get = qca8k_cled_brightness_get;
+ port_led->cdev.blink_set = qca8k_cled_blink_set;
+ port_led->cdev.hw_control_start = qca8k_cled_hw_control_start;
+ port_led->cdev.hw_control_stop = qca8k_cled_hw_control_stop;
+ port_led->cdev.hw_control_status = qca8k_cled_hw_control_status;
+ init_data.default_label = ":port";
+ init_data.devicename = "qca8k";
+ init_data.fwnode = led;
+
+ ret = devm_led_classdev_register_ext(priv->dev, &port_led->cdev, &init_data);
+ if (ret)
+ dev_warn(priv->dev, "Failed to int led");
+ }
+
+ return 0;
+}
+
+int
+qca8k_setup_led_ctrl(struct qca8k_priv *priv)
+{
+ struct fwnode_handle *mdio, *port;
+ int port_num;
+ int ret;
+
+ mdio = device_get_named_child_node(priv->dev, "mdio");
+ if (!mdio) {
+ dev_info(priv->dev, "No MDIO node specified in device tree!\n");
+ return 0;
+ }
+
+ fwnode_for_each_child_node(mdio, port) {
+ if (fwnode_property_read_u32(port, "reg", &port_num))
+ continue;
+
+ /* Each port can have at least 3 different leds attached */
+ ret = qca8k_parse_port_leds(priv, port, port_num);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index a429c9750add..10b2b47b2156 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -148,7 +148,7 @@ qca8k_set_page(struct mii_bus *bus, u16 page)
return 0;
}
-static int
+int
qca8k_read(struct qca8k_priv *priv, u32 reg, u32 *val)
{
struct mii_bus *bus = priv->bus;
@@ -192,7 +192,7 @@ qca8k_write(struct qca8k_priv *priv, u32 reg, u32 val)
return ret;
}
-static int
+int
qca8k_rmw(struct qca8k_priv *priv, u32 reg, u32 mask, u32 write_val)
{
struct mii_bus *bus = priv->bus;
@@ -1109,6 +1109,10 @@ qca8k_setup(struct dsa_switch *ds)
if (ret)
return ret;
+ ret = qca8k_setup_led_ctrl(priv);
+ if (ret)
+ return ret;
+
/* Make sure MAC06 is disabled */
ret = qca8k_reg_clear(priv, QCA8K_REG_PORT0_PAD_CTRL,
QCA8K_PORT0_PAD_MAC06_EXCHANGE_EN);
diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h
index 128b8cf85e08..f68f037fe909 100644
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h
@@ -11,6 +11,7 @@
#include <linux/delay.h>
#include <linux/regmap.h>
#include <linux/gpio.h>
+#include <linux/leds.h>
#define QCA8K_NUM_PORTS 7
#define QCA8K_NUM_CPU_PORTS 2
@@ -74,6 +75,43 @@
#define QCA8K_MDIO_MASTER_DATA_MASK GENMASK(15, 0)
#define QCA8K_MDIO_MASTER_MAX_PORTS 5
#define QCA8K_MDIO_MASTER_MAX_REG 32
+
+/* LED control register */
+#define QCA8K_LED_COUNT 15
+#define QCA8K_LED_PORT_COUNT 3
+#define QCA8K_LED_RULE_COUNT 6
+#define QCA8K_LED_RULE_MAX 11
+#define QCA8K_LED_CTRL_REG(_i) (0x050 + (_i) * 4)
+#define QCA8K_LED_CTRL0_REG 0x50
+#define QCA8K_LED_CTRL1_REG 0x54
+#define QCA8K_LED_CTRL2_REG 0x58
+#define QCA8K_LED_CTRL3_REG 0x5C
+#define QCA8K_LED_CTRL_SHIFT(_i) (((_i) % 2) * 16)
+#define QCA8K_LED_CTRL_MASK GENMASK(15, 0)
+#define QCA8K_LED_RULE_MASK GENMASK(13, 0)
+#define QCA8K_LED_BLINK_FREQ_MASK GENMASK(1, 0)
+#define QCA8K_LED_BLINK_FREQ_SHITF 0
+#define QCA8K_LED_BLINK_2HZ 0
+#define QCA8K_LED_BLINK_4HZ 1
+#define QCA8K_LED_BLINK_8HZ 2
+#define QCA8K_LED_BLINK_AUTO 3
+#define QCA8K_LED_LINKUP_OVER_MASK BIT(2)
+#define QCA8K_LED_TX_BLINK_MASK BIT(4)
+#define QCA8K_LED_RX_BLINK_MASK BIT(5)
+#define QCA8K_LED_COL_BLINK_MASK BIT(7)
+#define QCA8K_LED_LINK_10M_EN_MASK BIT(8)
+#define QCA8K_LED_LINK_100M_EN_MASK BIT(9)
+#define QCA8K_LED_LINK_1000M_EN_MASK BIT(10)
+#define QCA8K_LED_POWER_ON_LIGHT_MASK BIT(11)
+#define QCA8K_LED_HALF_DUPLEX_MASK BIT(12)
+#define QCA8K_LED_FULL_DUPLEX_MASK BIT(13)
+#define QCA8K_LED_PATTERN_EN_MASK GENMASK(15, 14)
+#define QCA8K_LED_PATTERN_EN_SHIFT 14
+#define QCA8K_LED_ALWAYS_OFF 0
+#define QCA8K_LED_ALWAYS_BLINK_4HZ 1
+#define QCA8K_LED_ALWAYS_ON 2
+#define QCA8K_LED_RULE_CONTROLLED 3
+
#define QCA8K_GOL_MAC_ADDR0 0x60
#define QCA8K_GOL_MAC_ADDR1 0x64
#define QCA8K_MAX_FRAME_SIZE 0x78
@@ -279,6 +317,19 @@ struct qca8k_ports_config {
u8 rgmii_tx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */
};
+struct qca8k_led_pattern_en {
+ u32 reg;
+ u8 shift;
+};
+
+struct qca8k_led {
+ u8 port_num;
+ u8 led_num;
+ u16 old_rule;
+ struct qca8k_priv *priv;
+ struct led_classdev cdev;
+};
+
struct qca8k_priv {
u8 switch_id;
u8 switch_revision;
@@ -293,6 +344,7 @@ struct qca8k_priv {
struct dsa_switch_ops ops;
struct gpio_desc *reset_gpio;
unsigned int port_mtu[QCA8K_NUM_PORTS];
+ struct qca8k_led ports_led[QCA8K_LED_COUNT];
};
struct qca8k_mib_desc {
@@ -308,4 +360,17 @@ struct qca8k_fdb {
u8 mac[6];
};
+/* Common function used by the LEDs module */
+int qca8k_read(struct qca8k_priv *priv, u32 reg, u32 *val);
+int qca8k_rmw(struct qca8k_priv *priv, u32 reg, u32 mask, u32 write_val);
+
+#ifdef CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT
+int qca8k_setup_led_ctrl(struct qca8k_priv *priv);
+#else
+static inline int qca8k_setup_led_ctrl(struct qca8k_priv *priv)
+{
+ return 0;
+}
+#endif
+
#endif /* __QCA8K_H */
--
2.32.0
